Got this thing in a trade. Fixed it up a little. I quite like the sound.
https://www.youtube.com/watch?v=jYhZj1c ... 3655378784" target="_blank
1933 York 706
- KingBassTrombone
- bugler
- Posts: 92
- Joined: Mon Dec 11, 2017 3:45 pm
- Location: Toledo, OH or Fremont, OH
- iiipopes
- Utility Infielder
- Posts: 8558
- Joined: Tue Sep 06, 2005 1:10 am
Re: 1933 York 706
Great tuba! The traditional way to set the slides for a 3-valve tuba that you can't "ride" the 1st valve for intonation (as, for example, on a 186):
1) make sure the open bugle is in tune with itself octave to fifth to octave, Bb - F - Bb, and if not, split the difference;
2) tune 1st valve Ab/Eb, and if there is a difference, split the difference;
3) tune 2nd valve A/E, and if there is a difference, split the difference;
4) pull 3rd valve so that 2+3 Gb and Db are slightly flat but still easy to lip to tune;
5) check 1+3 C and low F, should only be slightly sharp and very lippable;
6) check 1+2 G and D, and if sharp, pull 1st just a hair, and then re-check 1st valve Ab & Eb that they are still lippable to pitch;
7) good luck lipping down on 1+2+3 B nat and low E nat.
1) make sure the open bugle is in tune with itself octave to fifth to octave, Bb - F - Bb, and if not, split the difference;
2) tune 1st valve Ab/Eb, and if there is a difference, split the difference;
3) tune 2nd valve A/E, and if there is a difference, split the difference;
4) pull 3rd valve so that 2+3 Gb and Db are slightly flat but still easy to lip to tune;
5) check 1+3 C and low F, should only be slightly sharp and very lippable;
6) check 1+2 G and D, and if sharp, pull 1st just a hair, and then re-check 1st valve Ab & Eb that they are still lippable to pitch;
7) good luck lipping down on 1+2+3 B nat and low E nat.
Jupiter JTU1110, RT-82.
"Real" Conn 36K.
"Real" Conn 36K.
- Big Toot
- bugler
- Posts: 116
- Joined: Thu Apr 25, 2019 10:36 am
- Location: Dayton, OH, USA
Re: 1933 York 706
To be quite honest, I didn't know that there was even a "set up" involved in tubas. I am going to have to try this method on mine to see if it helps to iron out any of the intonation issues.iiipopes wrote:Great tuba! The traditional way to set the slides for a 3-valve tuba that you can't "ride" the 1st valve for intonation (as, for example, on a 186):
1) make sure the open bugle is in tune with itself octave to fifth to octave, Bb - F - Bb, and if not, split the difference;
2) tune 1st valve Ab/Eb, and if there is a difference, split the difference;
3) tune 2nd valve A/E, and if there is a difference, split the difference;
4) pull 3rd valve so that 2+3 Gb and Db are slightly flat but still easy to lip to tune;
5) check 1+3 C and low F, should only be slightly sharp and very lippable;
6) check 1+2 G and D, and if sharp, pull 1st just a hair, and then re-check 1st valve Ab & Eb that they are still lippable to pitch;
7) good luck lipping down on 1+2+3 B nat and low E nat.
New tubist. Ex-euphoniumistststst...
No, wait. Euphoniumist once again... Damn, it's hard to keep up.
MACK Brass EU1150S
Amati ABB-221
Musikwissenschaft.
Composer for all instruments and ensembles.
Eaton Community Band.
Richmond Jazz Orchestra.
No, wait. Euphoniumist once again... Damn, it's hard to keep up.
MACK Brass EU1150S
Amati ABB-221
Musikwissenschaft.
Composer for all instruments and ensembles.
Eaton Community Band.
Richmond Jazz Orchestra.
-
- 6 valves
- Posts: 4230
- Joined: Wed Jan 07, 2015 9:44 am
- Location: With my fellow Thought Criminals
Re: 1933 York 706
Three valves and a glitter gold Kelly 18!!
![music :tuba:](./images/smilies/tuba.gif)
![music :tuba:](./images/smilies/tuba.gif)
I am committed to the advancement of civil rights, minus the Marxist intimidation and thuggery of BLM.