Euph Recommendations Requested

The bulk of the musical talk
Post Reply
User avatar
van
bugler
bugler
Posts: 80
Joined: Fri Mar 19, 2004 1:22 am
Location: Los Angeles

Euph Recommendations Requested

Post by van »

My grandson plays euph very well for a 7th grader and his father is thinking about getting him a better horn than the one he's playing now. He would like to spend not much more than $1500 if possible and is looking at some 3+1 non-compensating models (Jupiter 570 and Nirschl I-700). Anyone have opinions on these choices or any other suggestions to look at? My grandson seems to like the idea of the 3+1 setup rather than 4 in-line, probably for no other reason than that's what two other players in the all-state jr. high band had. General comments or specific recommendations would be welcome.
User avatar
Gorilla Tuba
pro musician
pro musician
Posts: 379
Joined: Fri Mar 19, 2004 9:16 pm
Location: Pittsburg, Kansas
Contact:

Post by Gorilla Tuba »

I played a 3+1 noncomp at the BAC Horndoctor in Overland Park, Kansas. I believe the brand was Eastman Brass. Good pitch and good sound. Better than the Jupiter and cheaper.
A. Douglas Whitten
Associate Director of Bands
Assoc. Professor of Tuba & Euphonium
Pittsburg State University
Ace
5 valves
5 valves
Posts: 1395
Joined: Fri Mar 19, 2004 12:46 am
Location: Berkeley, CA

Post by Ace »

Eupharitone
bugler
bugler
Posts: 32
Joined: Sat Sep 29, 2007 1:44 pm
Location: Huntsville, Tx
Contact:

Post by Eupharitone »

3+1 non-comp models are very uncommon (though not quite "rare" per say) to come across. The main market for these horns involves people who want the 3+1 setup but don't want to drop a bunch more on the compensating system. This market isn't very large or expansive, which is surprising (since there are obviously people such as yourself looking for such a deal). I'm primarily a Euphonium player and feel I know more than some to most about various models of horns, but I don't really have much experience with these models. They've become much more common in recent years, but it seems most people either opt out for the comp model or just stick with the cheaper "4-banger" when shopping for a horn.

However, I did play on one particular model at TMEA about a month ago, from what I am almost positive was Eastman Winds (but they don't advertise such a horn on their site which is rather puzzling). It wasn't a bad horn at all, and it was in the lower $2k price range if I remember correctly which is about what you'd expect from a new horn. Finding a good, NEW horn in the $1500 range is a task....compensating or not. Actually finding a good, USED horn with a 3+1 non-comp setup in this price-range is also difficult.

I will however, recommend the Tuba Exchange 3+1 COMPENSATING model. Buying one new (As I think you'd be hard pressed to find a used version since it's still a pretty recently produced horn--you could check with them though) will set you back $2395; a little beyond your specified range, I understand but I've played the prototype before it went into production and it's an amazing horn considering the price. It doesn't stack up to the established state-of-the-art comp. models (Willson, Besson, Yamaha, Custom's line etc.) but it is fully compensating, has the 3+1 setup, and costs half as much as these beasts while being 90% as good, and I still would buy it over a Yamaha 321 (which I also recommend if you want to go the 4-banger route...it's a tried-and-true, cheap and very easy to find horn, afterall).

I really wish I knew more about the 3+1 non-comp market though, then I might be more helpful, sorry :(.
Brandon Quam
Sam Houston State University '11
Willson 2900 w/ BB1 mpc
mclaugh
bugler
bugler
Posts: 63
Joined: Mon Feb 25, 2008 8:03 pm

Post by mclaugh »

Eupharitone wrote:3+1 non-comp models are very uncommon (though not quite "rare" per say) to come across.
In North America, perhaps. They're quite commonly in the UK and France.
User avatar
SplatterTone
5 valves
5 valves
Posts: 1906
Joined: Fri Jul 15, 2005 11:17 pm
Location: Tulsa, OK
Contact:

Post by SplatterTone »

Amati makes a 3+1. The bore is on the small side, but the playing characteristics are OK if you accept that it is not going to have a big bottom end range. I got mine when Yankels Warehouse was blowing them out for about 1/4 the price on the following web site. Scroll down the page.
http://prosites-allmanmusic.homestead.c ... tones.html
Good signature lines: http://tinyurl.com/a47spm
User avatar
Alex C
pro musician
pro musician
Posts: 2225
Joined: Fri Mar 19, 2004 10:34 am
Location: Cybertexas

Post by Alex C »

I am not familiar with the Jupiter. I have played about 6 of the Nirschl non compensating instruments and believe that they outperform the Yamaha 321. The silver plated and lacquered instruments have been about equal. Great sound, great intonation, great playing characteristics.

These instruments performs at a very high level, a friend of mine has used this instrument in professional situations on more than one occassion, has been comfortable with it and conductors have liked it.

The Tuba Exchange euphonium is one you might also consider. It is the most responsive euphonium I've ever played. It doesn't produce a "Willson sound" but it's a great little horn. I think, in the long run, you will get more resale value out of the Nirschl... but that's a long way down the road.

A couple of people on this board speak highly of the Weril euphonium, you might look into that one, too.

I would avoid the off-brand Chinese instruments. Dalyan has had problems with their distributor in the US and that might be a problem to avoid also.
City Intonation Inspector - Dallas Texas
"Holding the Bordognian Fabric of the Universe together through better pitch, one note at a time."

Practicing results in increased atmospheric CO2 thus causing global warming.
ParLawGod
pro musician
pro musician
Posts: 215
Joined: Sat Jul 17, 2004 11:37 am
Location: Wisconsin
Contact:

Post by ParLawGod »

IF you can get one, Yamaha makes a 3+1 model. It's the Yamaha 621.

Here's a link with more info:

http://www.thomann.de/it/yamaha_yep621_bbeuphonium.htm

I have not personally played this model, but have heard great things about it. Doing a search here may also turn up more info.
User avatar
SplatterTone
5 valves
5 valves
Posts: 1906
Joined: Fri Jul 15, 2005 11:17 pm
Location: Tulsa, OK
Contact:

Post by SplatterTone »

It looks like Dillon has a house brand 3+1 horn that fits your budget.
http://tinyurl.com/2czf2u
Good signature lines: http://tinyurl.com/a47spm
Post Reply