cleaning my tuba
-
Johnsinfonian
- lurker

- Posts: 4
- Joined: Wed Aug 17, 2011 9:59 pm
cleaning my tuba
I've been looking through different threads trying to find advice on cleaning my horn, usually I take it to my local music store once a year for a thorough cleaning. I try to clean it at home at least four times a year; lately I haven't had the time to take it to get cleaned I was wondering what chemicals would be safe to use to get rid of build up?
-
eupher61
- 6 valves

- Posts: 2790
- Joined: Tue Oct 10, 2006 9:37 pm
Re: cleaning my tuba
dish soap. nothing stronger, for your protection and the tuba's.
- Rick F
- 5 valves

- Posts: 1679
- Joined: Thu Mar 18, 2004 11:47 pm
- Location: Lake Worth, FL
Re: cleaning my tuba
John, you might want to read this discussion thread for some good suggestions:
viewtopic.php?p=447072#p447072
viewtopic.php?p=447072#p447072
Miraphone 5050 - Warburton BJ/RF mpc
YEP-641S (recently sold), DE mpc (102 rim; I-cup; I-9 shank)
Symphonic Band of the Palm Beaches:
"Always play with a good tone, never louder than lovely, never softer than supported." - author unknown.
YEP-641S (recently sold), DE mpc (102 rim; I-cup; I-9 shank)
Symphonic Band of the Palm Beaches:
"Always play with a good tone, never louder than lovely, never softer than supported." - author unknown.
-
NCSUSousa
- 3 valves

- Posts: 365
- Joined: Mon Mar 25, 2013 8:55 am
- Location: Probably goofing off at work - in Chapel Hill, NC
- Contact:
Re: cleaning my tuba
Here's my set of tips for cleaning:
Dish soap is the main cleaner I use. It is an excellent degreaser for valves and slides. It may require some soaking time for full effect, but that's well worth it. It also gets any food particles out of the mouthpiece or leadpipe without much effort. A little scrubbing is required to completely remove slide grease.
Regular valve oil by itself is also an effective cleaner. I usually grab the bottle from my wife's trumpet case if I need any since my tuba has rotors.
You may not need anything more than water and a good snake/brush/rag to get most 'build up' out of your instrument. Depending on where the build-up is happening, you may want to consider changing the products (valve oil, slide grease, etc.) you're applying to your moving parts. There are whole threads dedicated to such issues so do some searching if you need to know more.
Also, make sure the water isn't too warm if you're dealing with lacquer. Not such a worry with silver plating.
Too hot, and you'll risk taking the lacquer off of your instrument. Depending on the quality of the lacquer job, that may not be much above 100F. I'm mentioning this from personal experience... The water wasn't any hotter than what I put in my sink to wash pots/pans and it took off some lacquer from a small area.
Dish soap is the main cleaner I use. It is an excellent degreaser for valves and slides. It may require some soaking time for full effect, but that's well worth it. It also gets any food particles out of the mouthpiece or leadpipe without much effort. A little scrubbing is required to completely remove slide grease.
Regular valve oil by itself is also an effective cleaner. I usually grab the bottle from my wife's trumpet case if I need any since my tuba has rotors.
You may not need anything more than water and a good snake/brush/rag to get most 'build up' out of your instrument. Depending on where the build-up is happening, you may want to consider changing the products (valve oil, slide grease, etc.) you're applying to your moving parts. There are whole threads dedicated to such issues so do some searching if you need to know more.
Also, make sure the water isn't too warm if you're dealing with lacquer. Not such a worry with silver plating.
Too hot, and you'll risk taking the lacquer off of your instrument. Depending on the quality of the lacquer job, that may not be much above 100F. I'm mentioning this from personal experience... The water wasn't any hotter than what I put in my sink to wash pots/pans and it took off some lacquer from a small area.
BBb Tuba with 4 Rotors -
TE-2110 (2009) + TE Rose
Mack 210 (2011) + Bruno Tilz NEA 310 M0
G. Schneider (Made in GDR, 1981?) + Conn Helleberg 120S
I earn my living as an Electrical Engineer - Designing Power systems for buildings
TE-2110 (2009) + TE Rose
Mack 210 (2011) + Bruno Tilz NEA 310 M0
G. Schneider (Made in GDR, 1981?) + Conn Helleberg 120S
I earn my living as an Electrical Engineer - Designing Power systems for buildings
- ghmerrill
- 4 valves

- Posts: 653
- Joined: Sat Mar 05, 2011 7:48 am
- Location: Central North Carolina
Re: cleaning my tuba
For serious cleaning I use Dove detergent, 409, a snake, and sometimes some vinegar.
But I strongly advise http://stores.homestead.com/hstrial-RRi ... Detail.bok. Well worth the money. Use it with Dove. It makes the cleaning/flushing process so easy that you can (and will be inclined to) flush your horn more frequently -- which prevents any crud build-up from getting to the point that it needs a heroic effort to eliminate. A review of it on Dave Werden's site is here: http://www.dwerden.com/forum/entry.php/ ... ?goto=prev
Yeah, you can put together something like this (minus the detergent reservoir) from parts at Lowes for around $10 (and I did), but it won't be as easy to use or as effective as the Quick Horn Rinse Sudser. Bob Ricker also stands behind it 100%.
But I strongly advise http://stores.homestead.com/hstrial-RRi ... Detail.bok. Well worth the money. Use it with Dove. It makes the cleaning/flushing process so easy that you can (and will be inclined to) flush your horn more frequently -- which prevents any crud build-up from getting to the point that it needs a heroic effort to eliminate. A review of it on Dave Werden's site is here: http://www.dwerden.com/forum/entry.php/ ... ?goto=prev
Yeah, you can put together something like this (minus the detergent reservoir) from parts at Lowes for around $10 (and I did), but it won't be as easy to use or as effective as the Quick Horn Rinse Sudser. Bob Ricker also stands behind it 100%.
Gary Merrill
Wessex EEb tuba (Wick 3XL)
Amati oval euph (DE LN106J6Es)
Mack Brass euph (DE LN106J9)
Buescher 1924 Eb, std rcvr, Kelly 25
Schiller bass trombone (DE LB/J/J9/Lexan 110, Brass Ark MV50R)
Olds '47 Standard trombone (mod. Kelly 12c)
Wessex EEb tuba (Wick 3XL)
Amati oval euph (DE LN106J6Es)
Mack Brass euph (DE LN106J9)
Buescher 1924 Eb, std rcvr, Kelly 25
Schiller bass trombone (DE LB/J/J9/Lexan 110, Brass Ark MV50R)
Olds '47 Standard trombone (mod. Kelly 12c)