Euphonium with bass trombone reciever?

The bulk of the musical talk
Post Reply
jon112780
4 valves
4 valves
Posts: 541
Joined: Sat Mar 20, 2004 10:52 am
Location: on my soapbox...

Euphonium with bass trombone reciever?

Post by jon112780 »

Anybody ever played one of these? I believe Wilson makes one and possibly Hirsbrunner, but how much different is the sound than the standard reciever; if you are used to playing a bass trombone mouthpiece?
User avatar
ufoneum
3 valves
3 valves
Posts: 385
Joined: Fri Feb 04, 2005 7:58 pm
Location: Evansville, IN

Post by ufoneum »

There is a large shank receiver on the Willson 2950, different Besson models, and the Hirsbrunner is also a large shank. Most mouthpiece companies offer all of their models in either a small, medium (european), and large shank. Most of the difference is in matching the large bore horn with a larger shank size. I have seen a Willson 2900 with a large shank - I think it was a conversion, though...
Assistant Prof. of Music - Kentucky Wesleyan College (Owensboro, KY)
Buffet Crampon and Besson Performing Artist
Conductor, River Brass Band (Evansville, IN)
Treasurer, International Tuba Euphonium Association
facebook.com/stuckemeyer
patstuckemeyer.com
User avatar
Chuck(G)
6 valves
6 valves
Posts: 5679
Joined: Fri Mar 19, 2004 12:48 am
Location: Not out of the woods yet.
Contact:

Post by Chuck(G) »

Don't forget the not-so-lowly Weril H980--and my Willson 2975/CB-30 came stock with a bass-shank receiver.
BopEuph
pro musician
pro musician
Posts: 656
Joined: Mon Aug 08, 2005 10:51 am
Location: Orlando, FL

Post by BopEuph »

ufoneum wrote: I have seen a Willson 2900 with a large shank - I think it was a conversion, though...
I have heard that Willson does offer a 2900 with a bass trombone shank, and it has just recently been available in the last 3 years or so. The 2950 is a large shank horn as well. However, if you are looking for a large shank euphonium to use the same mouthpiece for, say, your concert tenor bone, then I actually found it pointless. I like to use a certain mouthpiece for my euph and a certain piece for my trombone. Plus, it's actually easier (and possibly cheaper) to find two mouthpieces for both instruments. I play lead tenor in big bands, and found that a much smaller mouthpiece did not feel any differently when I played, although I still hear that it's a large piece for lead bone. I used a different mouthpiece because it's a different horn, and it would react differently to each instrument.

After receiving my 2900 and buying both the Mead and Bowman mouthpieces to try out, and getting a Warburton for my trombone, I have no regrets and would not change anything, and anyone that knows me could tell you that I am super poor and don't have much money to throw around.

Nick
User avatar
Highams
pro musician
pro musician
Posts: 793
Joined: Fri Mar 19, 2004 3:17 am
Location: Slough, Berkshire, England
Contact:

Post by Highams »

Large receivers are standard issue on a Willsons (and other brands) in the UK.

CB
Aspire & Be Inspired !
User avatar
Rick F
5 valves
5 valves
Posts: 1679
Joined: Thu Mar 18, 2004 11:47 pm
Location: Lake Worth, FL

Post by Rick F »

Yamaha 641, 642 and 842 come with the large shank (or bass trombone) receiver. Willson 2900 sold in the US is only available in the European shank. Hirsbrunner comes with interchangeable receivers.
Miraphone 5050 - Warburton BJ/RF mpc
YEP-641S (recently sold), DE mpc (102 rim; I-cup; I-9 shank)
Symphonic Band of the Palm Beaches:
"Always play with a good tone, never louder than lovely, never softer than supported." - author unknown.
User avatar
Teubonium
3 valves
3 valves
Posts: 367
Joined: Sat Mar 20, 2004 3:07 pm
Location: Colorado

Post by Teubonium »

Besson Sovereign 967 & 968 euphs come with large shank receiver.
Post Reply