Tuba stand?
- tubaman5150
- 3 valves

- Posts: 375
- Joined: Fri Mar 19, 2004 11:53 am
- Location: Manhattan, KS
Tuba stand?
Can anyone reccomend a good tuba stand to hold my tubas while I'm not playing? I need on to fit both a Miraphone 188 and 181 (but not at the same time, of course
).
No one who tells you what you want to hear at someone else's detriment is acting in your best interest.
-
ThomasP
- 3 valves

- Posts: 337
- Joined: Fri Mar 19, 2004 1:24 am
- Location: Atlanta, GA
- Contact:
-
Alex F
- 4 valves

- Posts: 798
- Joined: Fri Mar 19, 2004 12:39 am
- Location: Chicago
I use the K & M stands for both my tuba and euph. These are well made and adjustable for just about all tubas. Like anything else, however, they need to be used with a good dose of common sense. If I had a dog or children, I'd probably stick with the case. I keep my euph on its stand up against the back of a sofa and out of traffic.
- tubaman5150
- 3 valves

- Posts: 375
- Joined: Fri Mar 19, 2004 11:53 am
- Location: Manhattan, KS
I'm trying avoid standing them on their bells. I've seen too much damage that way. Putting them back in their cases is the best idea, but I need something quick and easy for my practice room.ThomasP wrote:the floor works well for me and I would say 90% of tuba players.
No one who tells you what you want to hear at someone else's detriment is acting in your best interest.
-
Tom
- 5 valves

- Posts: 1579
- Joined: Sat Mar 20, 2004 11:01 am
I've got one of the K&M stands that's pretty nice. With correct adjustment, the tuba is quite stable and doesn't slip around in the stand. That said, the horn can still slip and the entire unit can tip if it gets bumped good enough so I'd recommend keeping it away from high traffic areas during rehearsals and such. For home studio use, it's just the ticket though.
Here's a K&M on ebay that I've linked because it's got some pretty good pictures:
http://cgi.ebay.com/Professional-German ... dZViewItem
Here's a K&M on ebay that I've linked because it's got some pretty good pictures:
http://cgi.ebay.com/Professional-German ... dZViewItem
- dmmorris
- 3 valves

- Posts: 426
- Joined: Fri Mar 19, 2004 9:05 am
- Location: From far away as Jupiter sulfur mines, way down by the methane sea.
I agree:
- Tuba on bell = bad.......crinkled bells are ugly.
- Tuba on K&M stand = better - I leave mine in a stand in my practice room (always ready...even if I'm not!)......works great for gigs too!
- Tuba in case = best for protection, but a pain if you don't have room for the empty cases when your using the tuba.
K&M tuba stand w/ tuba
- Tuba on bell = bad.......crinkled bells are ugly.
- Tuba on K&M stand = better - I leave mine in a stand in my practice room (always ready...even if I'm not!)......works great for gigs too!
- Tuba in case = best for protection, but a pain if you don't have room for the empty cases when your using the tuba.
K&M tuba stand w/ tuba
beta 14??..........OK!
Mid 70's B&S Tuba
Mid 70's B&S Tuba
- SplatterTone
- 5 valves

- Posts: 1906
- Joined: Fri Jul 15, 2005 11:17 pm
- Location: Tulsa, OK
- Contact:
Nobody be knocking this over or stepping on it.

And ... the other end of the room.
WELCOME TO PARADISE!


And ... the other end of the room.
WELCOME TO PARADISE!

Good signature lines: http://tinyurl.com/a47spm