Basic Tuba Work

[pierso20]

Just a quick question for all the tech's.

If one was to get into basic repairs or building frankenhorns..nothing special..what would be a good set of basic tools to use? Just wondering...in case I decide to have a little fun experimenting in the future.

[The Big Ben]

From watching a tech at work:

1. A proper torch. I think trying to 'make do' with a hardware store propane torch would lead to a lot of heartache.

2. A stout bench with a vice. Metal 'soft jaws" are essential.

3. A drill press with vice. A very adaptable tool for many purposes.

4. Some specialized tools: A bell rolling rod and 'others'.

5. Hammers of different sizes and types.

[Rick Denney]

In addition to Ben's basics, Ferree's sells a line of "student" tools, and a set of those isn't too expensive and will give you something to play with. That set comprises a few dent balls (none really big enough) and a metal rod long enough to hold them. That rod will go in the vice Ben told you to get. Another metal rod, worked against the rod in that kit, will provide a basic bell-straightening capability.

Recognize that it is not the tools that get the results. I have many of those tools, and the best I've ever been able to do is turn dents into ripples.

Building frankenhorns usually requires the ability to bend tubing, for which you'll need a binding jig, and a way to fill the tubing with lead, Cerrobend, pitch, or some other filler.

Rick "noting that it's possible to 'play' using a propane torch" Denney