I didnt find yet any gigbag that suitable to the tuba.
the size of the tuba is :
Bore:19.5mm / .767”
Bell:450mm / 17.75
Height:1000mm / 39”
if anyone know about gigbag it this size plese let me know.
thanks a lot
Sapir Tal
Gigbag
-
sapirtal2008
- lurker
- Posts: 2
- Joined: Tue May 24, 2011 10:04 am
Gigbag
I ordered a tuba ,and i want to buy a gigbag for it.
I didnt find yet any gigbag that suitable to the tuba.
the size of the tuba is :
Bore:19.5mm / .767”
Bell:450mm / 17.75
Height:1000mm / 39”
if anyone know about gigbag it this size plese let me know.
thanks a lot
Sapir Tal
I didnt find yet any gigbag that suitable to the tuba.
the size of the tuba is :
Bore:19.5mm / .767”
Bell:450mm / 17.75
Height:1000mm / 39”
if anyone know about gigbag it this size plese let me know.
thanks a lot
Sapir Tal
-
sousaphone68
- 4 valves
- Posts: 980
- Joined: Thu Jun 02, 2011 6:46 pm
- Location: Ireland
Re: Gigbag
only advice i can give is dont buy a Ritter gig bag
Cant carry a tune but I can carry a tuba.
-
jamsav
- 3 valves
- Posts: 456
- Joined: Sun Jun 21, 2009 12:25 pm
- Location: stamford, ct
- Contact:
Re: Gigbag
call one of our illustrious sponsors, depending on how much you want to spend , you can either get a PROTEC that fits a 186 perfectly( same bell and length ), or spend alot more and get a custom bag , or anything in between....
http://www.westchestersymphonicwinds.org" target="_blank" target="_blank" target="_blank" target="_blank"
King 2341-MAW valves, GW Taku, Sellmansberger Symphony
Conn USN 20k, PT-44
King 2341-MAW valves, GW Taku, Sellmansberger Symphony
Conn USN 20k, PT-44
-
bort
- 6 valves
- Posts: 11223
- Joined: Wed Sep 22, 2004 11:08 pm
- Location: Minneapolis, Minnesota
Re: Gigbag
The Miraphone gig bags are really nice. If it's a rotary tuba, you might want to check that out!
-
aqualung
- bugler
- Posts: 237
- Joined: Sat Nov 13, 2010 12:34 am
Re: Gigbag
only advice I can give is that the boresize doesn't matter