TubeNet

the acid from my hands are starting to wear down the silverplating on my euph, so i was wondering if anyone either has or knows someone who sells some sort of leather wrap that i could put around the contact points of the horn so that the worn spots don't become worse.

For the handle, I use 5/8 clear tubing cut to length (about 5") and then slice it length-wise with a utility knife. I put it on with the slit away from my hand (toward valve casing). At the cost of about 15 cents per foot at Home Depot, you can buy a life-times worth of tubing for a buck. My horn is a Yamaha 641 so the handle is straight across. If there' a slight curve to it, you may have to use two separate pieces.