I'm looking for the following measurements from the bell of a Yamaha YEB-321, or a Mirafone 184:
1 - circumference of the bell where it meets the bottom bow ferrule
2 - length of the bell from said point to the bell flare (best measured with horn standing on the bell on the floor, with a level lined up even with where the bell meets the ferrule, but an accurate approximation would help, too.....)
If anyone has access to one of these horns, these measurements would be greatly appreciated. ..
Thanks!
YEB-321 or Mirafone 184 measurement needed
- roweenie
- pro musician
- Posts: 2165
- Joined: Mon Mar 05, 2007 10:17 am
- Location: Waiting on a vintage tow truck
YEB-321 or Mirafone 184 measurement needed
"Even a broken clock is right twice a day".
- roweenie
- pro musician
- Posts: 2165
- Joined: Mon Mar 05, 2007 10:17 am
- Location: Waiting on a vintage tow truck
Re: YEB-321 or Mirafone 184 measurement needed
I understand that the Mirafone 184 bell dimensions are nearly identical to the YEB-321, so I'm editing my question to include that horn too.
Thanks!
Thanks!
"Even a broken clock is right twice a day".
- groovlow
- bugler
- Posts: 244
- Joined: Thu Jun 16, 2011 5:21 pm
- Location: Nashville TN
Re: YEB-321 or Mirafone 184 measurement needed
From my MiraFone 24 & 5/8" ...184 CC 5v 1970
Actual bell length measured from inside the bell \T/.
12 3/16" where ferrule (top side, playing position) meets bell.
Joe
Actual bell length measured from inside the bell \T/.
12 3/16" where ferrule (top side, playing position) meets bell.
Joe
- roweenie
- pro musician
- Posts: 2165
- Joined: Mon Mar 05, 2007 10:17 am
- Location: Waiting on a vintage tow truck
Re: YEB-321 or Mirafone 184 measurement needed
Thank you!
"Even a broken clock is right twice a day".