TubeNet

Does Bohm & Meinl have a website and/or an on-line catalog?

I've searched but may have missed something.

That company is owned by Walter Nirschl (bm symphonic), as far as I know:

bm symphonic
Metallblasinstrumente GmbH
Buchenweg 3
D-82538 Geretsried
Email: info@walternirschl.de" target="_blank

oedipoes wrote:That company is owned by Walter Nirschl (bm symphonic), as far as I know:

bm symphonic
Metallblasinstrumente GmbH
Buchenweg 3
D-82538 Geretsried
Email: info@walternirschl.de" target="_blank" target="_blank" target="_blank" target="_blank" target="_blank" target="_blank" target="_blank

Your information is correct. Thanks!

Here's the instrument I'm trying to gather some information about. It's clearly marked "Made in Western Germany" and bears all of the earmarks of a horn that was possibly made in the mid-sixties. However... the horn seems near-new in terms of the lacquer and cleanliness on the inside. There were some serious problems with dents and the horn may have been stored for a long time. There no model or serial numbers on the horn. ... only a #15 build number on the linkage and valve components. .718" bore. 16 3/4" bell. I've emailed B & M.

Good looking horn. Tell us about the playing character.
Looked for a German site with some history too, finding nothin'.

http://www.walternirschl.de/


Here is a good shot of the engraving on a bass trumpet.
http://tromboneforum.org/index.php?topic=70456.0

I think "Melton" still can make F and Bb helicons. I'm probably confused by the Meinl family, I think that's Meinl-Weston but whatever - in the comments with this very listenable video of Trygve Madsen, Sonata, Op 34, the player says something about his F helicon, and I bet his other helicon is of similar provenance.

Not that it has anything to do with the present horn, unless there's a family relationship.

groovlow wrote:Good looking horn. Tell us about the playing character.....

The horn plays well and has a very tight focused timbre. The lower register tends to be a little sharp... typical. The 4th valve plays very sharp when used in place of 1-3... especially on a low C.

Donn wrote:I think "Melton" still can make F and Bb helicons. I'm probably confused by the Meinl family, I think that's Meinl-Weston but whatever - in the comments with this very listenable video of Trygve Madsen, Sonata, Op 34, the player says something about his F helicon, and I bet his other helicon is of similar provenance.

Not that it has anything to do with the present horn, unless there's a family relationship.

Yes, I saw a young man (maybe 20 year old) who owns a Fafner bell helicon which made by Meinl-Weston on Facebook , but can't remember his name .

Hello Dan,

Perhaps it could be useful to address Uwe Schneider at Chemnitz; he is an expert on (older) German brands and makes. His email: info@schneideruwe.de" target="_blank.
Another useful source is the Forum at the website of the Musikinstrumentenmuseum at Markneukirchen. Especially Mr. Weller (father and son, who both work for the museum) are very keen to answer questions about the history of instrument making in Germany.
Hubert

hubert wrote:Hello Dan,

Perhaps it could be useful to address Uwe Schneider at Chemnitz; he is an expert on (older) German brands and makes. His email: info@schneideruwe.de" target="_blank" target="_blank.
Another useful source is the Forum at the website of the Musikinstrumentenmuseum at Markneukirchen. Especially Mr. Weller (father and son, who both work for the museum) are very keen to answer questions about the history of instrument making in Germany.
Hubert

Thank you much. I will contact him.

I've learned that the B & M helicon was purchased new in 1985.... making it much newer than one might conclude from te fact that it has clockspring rotor mechanisms.