Page 1 of 1
Willson 3400 Problem
Posted: Wed Oct 21, 2015 7:25 pm
by flyingdogs
.
Re: Willson 3400 Problem
Posted: Wed Oct 21, 2015 8:11 pm
by jon112780
1- Is the valve vented? Perhaps the hole was drilled in the wrong place.
2- Get some electrical tape and cove up the visible seams while using heavy slide cream on your slide (this actually worked for me, I found the leak quite quickly).
Hope this helps!
Re: Willson 3400 Problem
Posted: Wed Oct 21, 2015 8:28 pm
by flyingdogs
jon112780 wrote:1- Is the valve vented? Perhaps the hole was drilled in the wrong place.
2- Get some electrical tape and cove up the visible seams while using heavy slide cream on your slide (this actually worked for me, I found the leak quite quickly).
Hope this helps!
What do you mean visible seams?
Re: Willson 3400 Problem
Posted: Wed Oct 21, 2015 10:31 pm
by jon112780
I had a slide shortened a while back and there was a slight gap/crack/slit when it was put back together that made the same buzz. No big deal.
Re: Willson 3400 Problem
Posted: Wed Oct 21, 2015 10:38 pm
by bort
Time for a 3rd tech. I have no clue who the best repairman is in your area, but there's clearly something wrong. Might not be easy to identify, but someone will find it and fix it!
Re: Willson 3400 Problem
Posted: Thu Oct 22, 2015 4:49 pm
by pjv
Give Rob Stuart a call. I don't know if he does tubas anymore but you can always ask and he does excellent work.
Robb Stewart Brass Instruments
140 E. Santa Clara St. #18
Arcadia, CA 91006 USA
626-447-1904
Also you can try The Horn Guys. They're a very helpful and happy folk!
818.248.7550
they have two locations:
La Crescenta
3704 Foothill Blvd. La Crescenta, CA 91214
Long Beach
4420 East Village Road, Long Beach, CA 90808
Good luck
Re: Willson 3400 Problem
Posted: Thu Oct 22, 2015 6:13 pm
by Phil Dawson
Dan Oberloh in Seattle is amazing. He's worth the trip or send it on the bus, Phil
Re: Willson 3400 Problem
Posted: Fri Oct 23, 2015 12:03 am
by flyingdogs
pjv wrote:Give Rob Stuart a call. I don't know if he does tubas anymore but you can always ask and he does excellent work.
Robb Stewart Brass Instruments
140 E. Santa Clara St. #18
Arcadia, CA 91006 USA
626-447-1904
Also you can try The Horn Guys. They're a very helpful and happy folk!
818.248.7550
they have two locations:
La Crescenta
3704 Foothill Blvd. La Crescenta, CA 91214
Long Beach
4420 East Village Road, Long Beach, CA 90808
Good luck
I've talked to the guys at Horn Guys before for non related reasons. I'm seriously considering making that drive back up there.