My experience exactly. As a once in a while bag it's fine but as an everyday bag I would find the Wessex bag to be a PITA. I've got one for a horn I only rarely use.fenne1ca wrote:I didn't care for the Wessex bag I had, though it did the job adequately, and for an unbeatable price. If you're up to the investment, though, Miraphone is the way to go (not to mention it'll fit your 186 like a glove, for obvious reasons). I use my gig bags multiple times daily, so the extra expense was well worth it to my mind.
Gig Bag Recommendation For Beater Horn
-
- 5 valves
- Posts: 1995
- Joined: Sun Mar 21, 2004 11:59 pm
- Location: One toke over the line...
Re: Gig Bag Recommendation For Beater Horn
- Polkahero
- bugler
- Posts: 97
- Joined: Fri Jun 13, 2014 12:48 pm
- Location: Michigan
Re: Gig Bag Recommendation For Beater Horn
Can you elaborate more on why the Wessex is a "PITA"?tofu wrote:My experience exactly. As a once in a while bag it's fine but as an everyday bag I would find the Wessex bag to be a PITA. I've got one for a horn I only rarely use.fenne1ca wrote:I didn't care for the Wessex bag I had, though it did the job adequately, and for an unbeatable price. If you're up to the investment, though, Miraphone is the way to go (not to mention it'll fit your 186 like a glove, for obvious reasons). I use my gig bags multiple times daily, so the extra expense was well worth it to my mind.
1967 Mirafone 186 BBb
- Polkahero
- bugler
- Posts: 97
- Joined: Fri Jun 13, 2014 12:48 pm
- Location: Michigan
Re: Gig Bag Recommendation For Beater Horn
Interesting that shortly after I posted this thread, the price on the Wessex bags jumped $8! Hmmm. . .
1967 Mirafone 186 BBb
- bort
- 6 valves
- Posts: 11222
- Joined: Wed Sep 22, 2004 11:08 pm
- Location: Minneapolis, Minnesota
Re: Gig Bag Recommendation For Beater Horn
I have never done the "flip trick" with my top loading bags, and I have used them for many, many years. Sounds like such a hassle, I wouldn't want to use a top-loader in that case, either!bloke wrote:I prefer side-loading bags, because I prefer to repack my instruments at waist-level (on a backstage provided folding table).
Others I know, though, don't like to have to elbow in between other musicians backstage, and prefer top-loading bags, because they can set their instruments on their bells, drop their bags over their instruments, flip everything over, zip it up, and take off.
The one bag of which I cannot understand the popularly is the expensive top-loading bag with drawstrings and a "hat". To me, that would be annoying...and those never seem to fit particularly well, either, in my experience.
Also, those A-bags you hate (and I hate too)... Didn't they used to be cheaper? Or maybe the only game in town?
-
- 5 valves
- Posts: 1995
- Joined: Sun Mar 21, 2004 11:59 pm
- Location: One toke over the line...
Re: Gig Bag Recommendation For Beater Horn
This is why if you can, you really need to try a bag before you buy, because I disagree with the above statement. I prefer a side loader, but do own some top loaders and I can get a tuba in and out of a top loader in a snap. In the case of the Wessex, it's a shame as it is a well made bag for a great price. I don't know what the benefits they saw in the design for this backaxx loader were. It's an awkward load at best. The zippers to enclose the straps is another non-starter. They could have cut some cost out of the design by eliminating that idea that simply doesn't work well. And finally the position of the bag on the back is not very good as far as I'm concerned. If you plan on walking a lot this is going to be important to you. Personally, I find the Cronkhite to be the best, but again this is going to be one of those personal to you things that you are only going to find what works for you by trying it. For my 185 I use a Cronkhite which is almost as old as the horn and still going strong.58mark wrote:
It's awkward, but not as bad as a top loader
- Polkahero
- bugler
- Posts: 97
- Joined: Fri Jun 13, 2014 12:48 pm
- Location: Michigan
Re: Gig Bag Recommendation For Beater Horn
Bummer about the Wessex bag. I've never had a top loader before, a section mate does and doesn't seem to have any issues getting his tuba in and out of the bag (I believe it's a Tuxedo). I may have to order whatever Guitar Center carries and then return whichever bag(s) I don't like.
Anyone own/try one of the newer Protect "Platinum" series bags? Supposed to be a big improvement over the more common Deluxe series.
Anyone own/try one of the newer Protect "Platinum" series bags? Supposed to be a big improvement over the more common Deluxe series.
1967 Mirafone 186 BBb
- Polkahero
- bugler
- Posts: 97
- Joined: Fri Jun 13, 2014 12:48 pm
- Location: Michigan
Re: Gig Bag Recommendation For Beater Horn
They look decent and are pretty affordable. I read a review about these not working with front action valves because they're too narrow, any insight on that issue?Stryk wrote:I've never priced them, but I got a couple Gard top loading bags with horns I bought and they seems very good quality - lots better than I thought they would be anyhow.
1967 Mirafone 186 BBb
-
- bugler
- Posts: 203
- Joined: Fri Apr 10, 2009 11:59 pm
- Location: Texas Hill Country
Re: Gig Bag Recommendation For Beater Horn
I used a Gard bag with my Cerveny 681 CC which is a rotary horn in the same style as a 186 but just a bit smaller. It was of very good quality and held up well, and the padding was firm and protective of the horn. I could see the bag being too narrow for certain piston front action horns but the 186 family is a relatively slim design.
Alexander 163 CC 5V, MW Thor, Mel Culbertson Neptune, B&S Symphonie F 6V
- Polkahero
- bugler
- Posts: 97
- Joined: Fri Jun 13, 2014 12:48 pm
- Location: Michigan
Re: Gig Bag Recommendation For Beater Horn
Great, thanks! I've got it narrowed down to the Tuxedo and the Gard, both carried by Guitar Center. I'll just return the one I don't want back to my local store without having to pay return shipping on such a bulky item.Mark Horne wrote:I used a Gard bag with my Cerveny 681 CC which is a rotary horn in the same style as a 186 but just a bit smaller. It was of very good quality and held up well, and the padding was firm and protective of the horn. I could see the bag being too narrow for certain piston front action horns but the 186 family is a relatively slim design.
1967 Mirafone 186 BBb
- Polkahero
- bugler
- Posts: 97
- Joined: Fri Jun 13, 2014 12:48 pm
- Location: Michigan
Re: Gig Bag Recommendation For Beater Horn
Got to say, I'm quite impressed with Gard's customer service. After I sent them the dimensions they requested, they replied back with another 3D diagram asking for the valve section dimensions. Check it out:
1967 Mirafone 186 BBb