Pneumonia - Disinfecting tuba
-
- 3 valves
- Posts: 365
- Joined: Mon Mar 25, 2013 8:55 am
- Location: Probably goofing off at work - in Chapel Hill, NC
- Contact:
Re: Pneumonia - Disinfecting tuba
BBb Tuba with 4 Rotors -
TE-2110 (2009) + TE Rose
Mack 210 (2011) + Bruno Tilz NEA 310 M0
G. Schneider (Made in GDR, 1981?) + Conn Helleberg 120S
I earn my living as an Electrical Engineer - Designing Power systems for buildings
TE-2110 (2009) + TE Rose
Mack 210 (2011) + Bruno Tilz NEA 310 M0
G. Schneider (Made in GDR, 1981?) + Conn Helleberg 120S
I earn my living as an Electrical Engineer - Designing Power systems for buildings
- bisontuba
- 6 valves
- Posts: 4319
- Joined: Sat Mar 20, 2004 8:55 am
- Location: Bottom of Lake Erie
Re: Pneumonia - Disinfecting tuba
Hydrogen peroxide?
- MaryAnn
- Occasionally Visiting Pipsqueak
- Posts: 3217
- Joined: Fri Mar 19, 2004 9:58 am
Re: Pneumonia - Disinfecting tuba
I am struggling with more than walking pneumonia right now in that they are unable to diagnose it, it has had me flat for six weeks now, and I refuse to let them just throw drugs at a target that may be viral, bacterial, or fungal, shotgun fashion. So curious to know how they diagnosed you and what they are treating you with. Thanks.
BTW, do not EVER join a Medicare HMO. They will basically give you denial of care by changing your PCP so often that you literally cannot get in to see one before s/he quits and another is assigned, and you start over, only to have that one quit before you can get in either. Five times now since January.
BTW, do not EVER join a Medicare HMO. They will basically give you denial of care by changing your PCP so often that you literally cannot get in to see one before s/he quits and another is assigned, and you start over, only to have that one quit before you can get in either. Five times now since January.
-
- 3 valves
- Posts: 365
- Joined: Mon Mar 25, 2013 8:55 am
- Location: Probably goofing off at work - in Chapel Hill, NC
- Contact:
Re: Pneumonia - Disinfecting tuba
Both hydrogen peroxide and bleach create oxidizing reactions with silver, brass, copper or zinc.
If you really want to use more than water and dish soap, I'd use with something like alcohol that kills 'bugs' but doesn't react strongly with the metals involved.
If you really want to use more than water and dish soap, I'd use with something like alcohol that kills 'bugs' but doesn't react strongly with the metals involved.
BBb Tuba with 4 Rotors -
TE-2110 (2009) + TE Rose
Mack 210 (2011) + Bruno Tilz NEA 310 M0
G. Schneider (Made in GDR, 1981?) + Conn Helleberg 120S
I earn my living as an Electrical Engineer - Designing Power systems for buildings
TE-2110 (2009) + TE Rose
Mack 210 (2011) + Bruno Tilz NEA 310 M0
G. Schneider (Made in GDR, 1981?) + Conn Helleberg 120S
I earn my living as an Electrical Engineer - Designing Power systems for buildings
- Rick F
- 5 valves
- Posts: 1677
- Joined: Thu Mar 18, 2004 11:47 pm
- Location: Lake Worth, FL
Re: Pneumonia - Disinfecting tuba
Sorry to hear of your extended illness Mary Ann. HMOs are frustrating for sure. That's why Jesus was born in a stable... Mary and Joseph had the wrong HMO.MaryAnn wrote:(snip) BTW, do not EVER join a Medicare HMO. They will basically give you denial of care by changing your PCP so often that you literally cannot get in to see one before s/he quits and another is assigned, and you start over, only to have that one quit before you can get in either. Five times now since January.
Miraphone 5050 - Warburton mpc (Brandon Jones)
YEP-641S (on long-term loan to grandson)
DE mpc (102 rim; I-cup; I-9 shank)
YEP-641S (on long-term loan to grandson)
DE mpc (102 rim; I-cup; I-9 shank)
- Tubanomicon
- 4 valves
- Posts: 722
- Joined: Wed May 18, 2016 6:01 am
Re: Pneumonia - Disinfecting tuba
What an excellent idea! Never tried it, but I will now.Stryk wrote:I Scope my horn at times - not a bore scope - Scope mouthwash. Usually I use it to get rid of bad smells, but it has alcohol and a good aroma.
“Very little strength can produce much motion of air. Learn about air as motion.”
--Arnold Jacobs
--Arnold Jacobs
- pjv
- 4 valves
- Posts: 879
- Joined: Sun Jul 11, 2004 4:39 am
Re: Pneumonia - Disinfecting tuba
Just how long exactly can these germs survive on a cold metal surface?
-
- 3 valves
- Posts: 365
- Joined: Mon Mar 25, 2013 8:55 am
- Location: Probably goofing off at work - in Chapel Hill, NC
- Contact:
Re: Pneumonia - Disinfecting tuba
I wasn't aware of this. It's probably the best idea.bloke wrote:Petroleum distillates kill germs.
What's wrong with sloshing a bunch of lamp oil through your valve section?
- kill germs
- lubricate
- clean
That or just ship your horn to me if you're worried about it. I will dispose of it for you.
BBb Tuba with 4 Rotors -
TE-2110 (2009) + TE Rose
Mack 210 (2011) + Bruno Tilz NEA 310 M0
G. Schneider (Made in GDR, 1981?) + Conn Helleberg 120S
I earn my living as an Electrical Engineer - Designing Power systems for buildings
TE-2110 (2009) + TE Rose
Mack 210 (2011) + Bruno Tilz NEA 310 M0
G. Schneider (Made in GDR, 1981?) + Conn Helleberg 120S
I earn my living as an Electrical Engineer - Designing Power systems for buildings
-
- 3 valves
- Posts: 365
- Joined: Mon Mar 25, 2013 8:55 am
- Location: Probably goofing off at work - in Chapel Hill, NC
- Contact:
Re: Pneumonia - Disinfecting tuba
Bacteria don't live long at all on dry brass, copper or silver (inside or outside of your tuba).pjv wrote:Just how long exactly can these germs survive on a cold metal surface?
http://www.tested.com/science/life/4539 ... -bacteria/
All metals are not equal in this regard.
BBb Tuba with 4 Rotors -
TE-2110 (2009) + TE Rose
Mack 210 (2011) + Bruno Tilz NEA 310 M0
G. Schneider (Made in GDR, 1981?) + Conn Helleberg 120S
I earn my living as an Electrical Engineer - Designing Power systems for buildings
TE-2110 (2009) + TE Rose
Mack 210 (2011) + Bruno Tilz NEA 310 M0
G. Schneider (Made in GDR, 1981?) + Conn Helleberg 120S
I earn my living as an Electrical Engineer - Designing Power systems for buildings
- pjv
- 4 valves
- Posts: 879
- Joined: Sun Jul 11, 2004 4:39 am
Re: Pneumonia - Disinfecting tuba
Haha
Thanks Guy's
Ive been playing for two weeks at a forest theater where cell phone reception is almost 0. I couldn't get enough reception on my phone to connect the links.
I also know (and thought everyone knew) that bacteria doesn't survive outside of the body for very long. I literally was asking how many minutes does this walking pneumonia survive outside of the body.
I'm now at a coffee shop with wifi so I've been able to read the links.
Thanks
Cheers
Thanks Guy's
Ive been playing for two weeks at a forest theater where cell phone reception is almost 0. I couldn't get enough reception on my phone to connect the links.
I also know (and thought everyone knew) that bacteria doesn't survive outside of the body for very long. I literally was asking how many minutes does this walking pneumonia survive outside of the body.
I'm now at a coffee shop with wifi so I've been able to read the links.
Thanks
Cheers
- Matt Walters
- The Tuba Whisperer
- Posts: 462
- Joined: Fri Mar 19, 2004 9:20 am
- Location: Woodbridge, NJ
Re: Pneumonia - Disinfecting tuba
THANK YOU for what you just said. Most people have no idea what gunk is inside their horns. About every 6 months I get a horn so bad I gag when I see what comes out of the horn when doing a Chemical Clean and Service. Another trick that I use even though I brush my teeth before playing and wash out my horns on a regular basis, is Isopropyl Alcohol. Pull main tuning slide and dump into horn so that it goes through the valves and out the leadpipe. Kills germs as it evaporates.Keep the interior of the leadpipe CLEAN and you won't have issues. Brass is anti-microbial. It always has been since humans first stumbled upon melting zinc into copper and using it to make spoons for all that ice cream and microwaveable soup the ancients used to eat.
You get sick when the inside of your leadpipe is so disgustingly gunky that the germs can live despite the antimicrobial nature of brass. And that, my friends, says a lot about you, because that is disgusting. KEEP IT CLEAN. You don't have to worry much about after the leadpipe. All of the horn needs to be clean, but if you had been cleaning your horn on a regular basis you would have already figured out that not much gets past the valve set unless you have been a dirty pig with your tuba and your dental hygiene. Clean your teeth before you play. Brush out your leadpipe regularly. Wash it out with valve oil (er, Walmart lamp oil if you are a cheapskate like the bloke) every week or so, if you are sick when you play, wash/brush it clean with soap and then oil after you play.
Someone's spit filled horn once put me in the hospital for 10 days and out of work for 30. I now try to be as careful as I can short of wearing a chem warfare suit.
Matt Walters
Last chair tubist
Who Cares What Ensemble
Owns old tubas that play better than what you have.
Last chair tubist
Who Cares What Ensemble
Owns old tubas that play better than what you have.
- thevillagetuba
- 4 valves
- Posts: 695
- Joined: Thu Apr 21, 2011 9:40 am
- Location: Cleveland, OH
- Contact:
Re: Pneumonia - Disinfecting tuba
The general conception has been that most viruses cannot live for more than 15 minutes outside the body, and that most bacteria cannot live for more than 24 hours. However, there was a team of researchers that found that there is a possibility that the biofilm that bacteria creates when in contact with a host might allow them to live longer, as was published in the 2014 issue of Infection and Immunity (Here is a link to an article about it). The specifically found that S. pneumoniae and S. pyogenes were alive and thriving on stuffed animals and cribs long after any human contact.pjv wrote:Haha
Thanks Guy's
Ive been playing for two weeks at a forest theater where cell phone reception is almost 0. I couldn't get enough reception on my phone to connect the links.
I also know (and thought everyone knew) that bacteria doesn't survive outside of the body for very long. I literally was asking how many minutes does this walking pneumonia survive outside of the body.
I'm now at a coffee shop with wifi so I've been able to read the links.
Thanks
Cheers
So, if you were in contact with something that is not antimicrobial like Brass, then I would disinfect it just to be safe. But your horn is fine, as many have pointed out (especially the elephant) as long as you keep that leadpipe clean.
Robert S. Pratt
B.M., M.M. Tuba Performance
Getzen G60 prototype
B.M., M.M. Tuba Performance
Getzen G60 prototype
-
- bugler
- Posts: 192
- Joined: Sat Sep 30, 2006 9:54 am
- Location: Belgium
Re: Pneumonia - Disinfecting tuba
deleted
Last edited by peterbas on Sun Mar 12, 2023 6:36 pm, edited 1 time in total.
- Donn
- 6 valves
- Posts: 5977
- Joined: Fri Aug 19, 2005 3:58 pm
- Location: Seattle, ☯
Re: Pneumonia - Disinfecting tuba
I took bloke to be suggesting a rinse. For that - straight, I guess. I don't know if he was serious. Its function in this case would apparently be a petroleum based solvent, like cleaning motor vehicle parts in gasoline but not as smelly (the stuff my hardware store carries is not smelly.) This would be a way to remove grease that builds up inside, though it would probably be really slow since lamp oil isn't a very aggressive solvent. But most of the grease in there I put there, in the slides, and I'd just as soon it stays where it is. So that's a long way of saying, I don't see the point.
As a lubricant, it's too light on its own for any tuba of mine, but it doesn't take much motor oil to stiffen it up plenty. Any grade and weight will do fine, probably even synthetic. When I change oil, there's always a few drops left in the bottle, and I collect that for valve lube.
As a lubricant, it's too light on its own for any tuba of mine, but it doesn't take much motor oil to stiffen it up plenty. Any grade and weight will do fine, probably even synthetic. When I change oil, there's always a few drops left in the bottle, and I collect that for valve lube.
-
- 4 valves
- Posts: 552
- Joined: Wed Aug 09, 2006 3:21 pm
- Location: uk
Re: Pneumonia - Disinfecting tuba
the two things that no one seems to have suggested so far - soap (washing up liquid 5mls per bowlful) and warm waterbloke wrote:...so (also ignoring Wade's information) what then - REALLY - SHOULD I pour down my instrument to kill all those germs !??!?
courtois 181 EEb
PT24+
PT24+
-
- bugler
- Posts: 192
- Joined: Sat Sep 30, 2006 9:54 am
- Location: Belgium
Re: Pneumonia - Disinfecting tuba
deleted
Last edited by peterbas on Sun Mar 12, 2023 6:36 pm, edited 1 time in total.
-
- bugler
- Posts: 192
- Joined: Sat Sep 30, 2006 9:54 am
- Location: Belgium
Re: Pneumonia - Disinfecting tuba
deleted
Last edited by peterbas on Sun Mar 12, 2023 6:36 pm, edited 1 time in total.
-
- bugler
- Posts: 199
- Joined: Wed Jun 02, 2010 2:17 pm
- Location: Highlands NJ - gateway to the Jersey Shore (Sandy Hook)
Re: Pneumonia - Disinfecting tuba
The simplest solution for freshening up a baritone or tuba is vinegar and water, and lots of it once in a while. A 50/50 mix works well; just be patient and rinse it out too. Alcohol dissolves some lacquers, and other solvents can be detrimental to the metal. I still use Dawn as my maintenance degreaser and have been doing so since it came on the market years ago. Aside from my Conn 5J my horns are old - 1933 Martin Handcraft bellfront, 1926 Martin Handcraft upright, 1938 King top action etc.
Be nice to your old horns and they'll be nice to you.
Washing out your mouthpiece every time you play, carrying a mouthpiece brush with you, and finding a place to brush your teeth after the dinner break before you play again helps a lot in staying healthy and keeping the horn clean. Some guys are real grubs when it comes to mouthpiece hygiene. Your teachers should have impressed this upon you.
Be nice to your old horns and they'll be nice to you.
Washing out your mouthpiece every time you play, carrying a mouthpiece brush with you, and finding a place to brush your teeth after the dinner break before you play again helps a lot in staying healthy and keeping the horn clean. Some guys are real grubs when it comes to mouthpiece hygiene. Your teachers should have impressed this upon you.
Mark Heter
1926 Martin Handcraft 3v upright bell front action ; 1933 Martin Handcraft 3v bellfront; King 2341 (old style); King top-action 3v; Bach (King) fiberglass sousaphone.
1926 Martin Handcraft 3v upright bell front action ; 1933 Martin Handcraft 3v bellfront; King 2341 (old style); King top-action 3v; Bach (King) fiberglass sousaphone.
-
- 3 valves
- Posts: 365
- Joined: Mon Mar 25, 2013 8:55 am
- Location: Probably goofing off at work - in Chapel Hill, NC
- Contact:
Re: Pneumonia - Disinfecting tuba
Yeah. Welcome to the internet. People don't respond to the good posts. They respond to personal stories and posts that missed the mark entirely if they're not responding to the OP.the elephant wrote:As I said above, no one reads my stuff.peter birch wrote:the two things that no one seems to have suggested so far - soap (washing up liquid 5mls per bowlful) and warm waterbloke wrote:...so (also ignoring Wade's information) what then - REALLY - SHOULD I pour down my instrument to kill all those germs !??!?
Soap will not remove some of the stuff we spit into our horns if it dries. Petroleum distillates will. Oil on a regular basis. Soap right after you get home (followed by oil) if you are playing when sick. If the surface of the metal is not skimmed over the brass kills the germs. Oil and a snake brush keep that slime off and the brass kills whatever is left. Soap is just piling on if the metal is clean. It is an extra step for when you know you are blowing funk into the horn but not really needed when the leadpipe is clean and you are not sick.the elephant wrote:Clean your teeth before you play. Brush out your leadpipe regularly. Wash it out with valve oil (er, Walmart lamp oil if you are a cheapskate like the bloke) every week or so, if you are sick when you play, wash/brush it clean with soap and then oil after you play.
Soap requires a thorough wash-out after you use it. Valve oil does not.
I suggested doing JUST soap and water in both my 1st and 2nd posts, mostly because I know that people probably don't clean as often as they should. (And always follow soap and water with lube and oil, duh).
If people keep their instruments clean and oiled (like the manufacturers recommend), then they don't have anything to worry about on this topic (or other bacteria, viruses, mold, fungus or lime deposits, etc).
BBb Tuba with 4 Rotors -
TE-2110 (2009) + TE Rose
Mack 210 (2011) + Bruno Tilz NEA 310 M0
G. Schneider (Made in GDR, 1981?) + Conn Helleberg 120S
I earn my living as an Electrical Engineer - Designing Power systems for buildings
TE-2110 (2009) + TE Rose
Mack 210 (2011) + Bruno Tilz NEA 310 M0
G. Schneider (Made in GDR, 1981?) + Conn Helleberg 120S
I earn my living as an Electrical Engineer - Designing Power systems for buildings