loud

The bulk of the musical talk
PMeuph
5 valves
5 valves
Posts: 1382
Joined: Tue Nov 06, 2007 7:36 pm
Location: Canada

Re: loud

Post by PMeuph »

Stryk wrote:683db - loud enough to make you puke....

https://www.youtube.com/watch?v=ZVlS64b_4K8
I get that you're joking, but unscientifically I'll guestimate that they're cracking out 120 db or so. 150 decibels is enough to make you deaf and to make you ill. 200 can kill you.

683db would probably kill everyone you know....
Yamaha YEP-642s
Boosey & Hawkes 19" Bell Imperial EEb
TheTuba
3 valves
3 valves
Posts: 368
Joined: Sun Dec 10, 2017 9:02 pm

Re: loud

Post by TheTuba »

PMeuph wrote:
Stryk wrote:683db - loud enough to make you puke....

https://www.youtube.com/watch?v=ZVlS64b_4K8
I get that you're joking, but unscientifically I'll guestimate that they're cracking out 120 db or so. 150 decibels is enough to make you deaf and to make you ill. 200 can kill you.

683db would probably kill everyone you know....
683db can kill you by the laptop/PC/phone speaker exploding!
I would put a good signature here, but i dont have one, so this will make do.
User avatar
Leland
pro musician
pro musician
Posts: 1650
Joined: Fri Mar 19, 2004 11:54 am
Location: Washington, DC

Re: loud

Post by Leland »

Stryk wrote:I am doubting they are close to 120db - an entire 350 piece college marching band is about that.
The actual dB numbers depend a lot on proximity and where they're playing. We had OSHA people come to an indoor rehearsal and do some measurements on our ensemble (about 45-55 brass, depending on the year, plus about 15 battery percussion), and we were hitting 115+ when measured at the podium in front of the group. Back in the percussion, it peaked in the high 120s, I think. We didn't get numbers that high when measured outdoors.

Earplugs were standard issue, and the OSHA results were used to justify the cost.

Pics from a rehearsal break and of my stash of musicians' earplugs:
IMG_3917.jpg
IMG_3807 (1).jpg
You do not have the required permissions to view the files attached to this post.
Lee Stofer
4 valves
4 valves
Posts: 928
Joined: Mon Mar 22, 2004 7:50 am

Re: loud

Post by Lee Stofer »

Antontuba wrote:Fritz Kaenzig told me he knew someone who had a sophisticated, high end volume / decibel instrument. Playing as loud as he possibly could, with multiple attempts, the highest reading he was able to achieve was around 7, on a 0-10 scale. When he played as full, rich, as possible, he scored almost 9. He said it’s all about the overtones.
It seems that many people think that the Chicago Symphony brass section has the capability to play very loud, but what they are doing is playing very well in-tune and resonating very well, which is very powerful at any dynamic level. Resonating, and making the overtones work for you is more important than blowing X - number of liters of air per minute.
Lee A. Stofer, Jr.
User avatar
roweenie
pro musician
pro musician
Posts: 2165
Joined: Mon Mar 05, 2007 10:17 am
Location: Waiting on a vintage tow truck

Re: loud

Post by roweenie »

Lee Stofer wrote:It seems that many people think that the Chicago Symphony brass section has the capability to play very loud, but what they are doing is playing very well in-tune and resonating very well, which is very powerful at any dynamic level. Resonating, and making the overtones work for you is more important than blowing X - number of liters of air per minute.
+1
"Even a broken clock is right twice a day".
User avatar
proam
bugler
bugler
Posts: 123
Joined: Wed Sep 23, 2015 8:19 pm

Re: loud

Post by proam »

That video reminds me of the french style of playing hunting horns

https://www.youtube.com/watch?v=wmQv67CmPf8" target="_blank

It also reminds me of the Tennessee State University marching band which I enjoy watching very much. Their energy and enthusiasm makes me happy.
User avatar
Roger Lewis
pro musician
pro musician
Posts: 1157
Joined: Fri Mar 19, 2004 7:48 am

Re: loud

Post by Roger Lewis »

Interesting thread. There was a broadcast of Science Friday on NPR a while ago that was investigating how many "trumpets" it would have taken to actually bring down the walls of Jericho. They determined that it would take about 170 decibels to do it. They brought in one of the engineers from Altec Lansing speakers and he stated that they could not build a speaker that could go that load. He also mentioned that at 150 decibels, the air around the sound source turns into plasma. Great stuff.

Personally I have been clocked at about 120 db using the meter in Harvey Phillips' studio.
"The music business is a cruel and shallow trench, a long plastic hallway where thieves and pimps run free and good men die like dogs. There's also a negative side." Hunter S Thompson
User avatar
swillafew
5 valves
5 valves
Posts: 1029
Joined: Sun Nov 22, 2009 6:20 pm
Location: Aurora, IL

Re: loud

Post by swillafew »

In 1980 I worked as Keystone Kop (tubist) at Valleyfair! amusement park. Another group was the Oom-Pah band, same instrumentation as our band (5 horns, two drums). One day our band was on the far end of the park from the Oom-Pahs, and you could clearly hear them through roller coasters, games of all kinds, lots of din. The euphonium player in particular was quite a breath support player (Roxanne DeBates, as I recall) , and we could hear her about as loud as the rest of the band put together. The memory of it really sticks, we were a long way from where we should have been able to hear even a note of it.

Playing in tune is what makes the sound carry. An unfocused or unclear sound doesn't go far. All summer, school groups would parade though the park, and sometimes we fell in with them and picked up whatever they were playing. We weren't quite as tuned up as the Oom-Pahs but we could equal the smaller school bands without any trouble.
MORE AIR
User avatar
brassbow
bugler
bugler
Posts: 122
Joined: Fri Dec 23, 2011 1:29 pm

Re: loud

Post by brassbow »

The reason for the original post is that I play on a conn 2j eb 3/4 in a british brass band. My fellow Eb are on bats. One is a monster york bugle with conn or besson valve sets. Not sure of the other but is has a 19/20 inch bell.
https://www.nebraskabrassband.com/live" target="_blank" target="_blank

We get pretty loud. My concern is to get a balence I feel I have to be twice as loud to blend.
As to projection, I try to focus on enveloping the entire venue with sound. So can a small bore 3/4 keep up with EEb large bore batz? In asking what the norm DB level, it gives me an idea of if I am there, or i should work with an spl meter more. Thanks
Conn 2j Eb tuba,
Eb SARV bugle by R. Stewart,
Continental Eb/F alto,
Olds ambassador baritone,
Zeus Bb cornet,
Hawks and son 1911 eb cornet,
Holton colligiate trumpet,
King G/F 1930's field trumpet
Yes i play them all!!!!!!!!
Image
User avatar
Leland
pro musician
pro musician
Posts: 1650
Joined: Fri Mar 19, 2004 11:54 am
Location: Washington, DC

Re: loud

Post by Leland »

brassbow wrote:The reason for the original post is that I play on a conn 2j eb 3/4 in a british brass band. My fellow Eb are on bats. One is a monster york bugle with conn or besson valve sets. Not sure of the other but is has a 19/20 inch bell.
https://www.nebraskabrassband.com/live" target="_blank" target="_blank" target="_blank

We get pretty loud. My concern is to get a balence I feel I have to be twice as loud to blend.
As to projection, I try to focus on enveloping the entire venue with sound. So can a small bore 3/4 keep up with EEb large bore batz? In asking what the norm DB level, it gives me an idea of if I am there, or i should work with an spl meter more. Thanks
I'd ask an observer to listen closely and give feedback. Your seat, inside the section, is a bad place for hearing what it sounds like on the other side of the bell.

I'd also say that the color of your sound is more important than simple SPL. If you were to play at a measured SPL level that's equal to the others, but your sound is brighter and more shrill, you'll seem louder, and you won't be blending as well.

Match the tone color first. That's your priority as a section player.
User avatar
Matt Walters
The Tuba Whisperer
The Tuba Whisperer
Posts: 462
Joined: Fri Mar 19, 2004 9:20 am
Location: Woodbridge, NJ

Re: loud

Post by Matt Walters »

The "Worser the Player, the Louder the Sounder". I've heard some REALLY LOUD sounds over the years. :roll:
Matt Walters
Last chair tubist
Who Cares What Ensemble
Owns old tubas that play better than what you have.
User avatar
Donn
6 valves
6 valves
Posts: 5977
Joined: Fri Aug 19, 2005 3:58 pm
Location: Seattle, ☯

Re: loud

Post by Donn »

Leland wrote:
brassbow wrote:... My concern is to get a balance I feel I have to be twice as loud to blend. ...
...
I'd also say that the color of your sound is more important than simple SPL. If you were to play at a measured SPL level that's equal to the others, but your sound is brighter and more shrill, you'll seem louder, and you won't be blending as well.

Match the tone color first. That's your priority as a section player.
[Just seemed to bear repeating.]
Post Reply