raw brass horns

The bulk of the musical talk
Post Reply
User avatar
TexTuba
5 valves
5 valves
Posts: 1424
Joined: Tue Feb 08, 2005 5:01 pm

Post by TexTuba »

Tom
5 valves
5 valves
Posts: 1579
Joined: Sat Mar 20, 2004 11:01 am

Post by Tom »

Image

It's a picture of someone's raw brass Gronitz PCM from bassclefbrass.com

Raw brass tubas don't have lacquer...that's why they're raw brass...

A freshly stripped tuba or a raw brass horn right out of the factory might look like it's lacquered (maybe the case with the 186 linked above) since the horn needs to be buffed after being stripped or assembled (as would be the case from the factory). In addition, how fast a horn tarnishes to the brownish color will depend on how much you handle it, the environment, and how often you polish it up. I just let my raw brass horn go, with no attempt to polish it, etc., but I think raw brass looks kind of cool 8)
User avatar
tubacdk
pro musician
pro musician
Posts: 314
Joined: Fri Mar 19, 2004 10:26 am
Location: Los Angeles, CA

Post by tubacdk »

Image
User avatar
Rick Denney
Resident Genius
Posts: 6650
Joined: Mon Mar 22, 2004 1:18 am
Contact:

Re: raw brass horns

Post by Rick Denney »

cyras21 wrote:anyone have any pics?
Image

Image

You've seen both of these in person before. The second one is a lot less shiny now than it was when the picture was made, and the first one has sort of settled into this look after ten years or so of not being polished.

Rick "who doesn't mind shine but who isn't willing to spend much money to get it" Denney
User avatar
bort
6 valves
6 valves
Posts: 11223
Joined: Wed Sep 22, 2004 11:08 pm
Location: Minneapolis, Minnesota

Post by bort »

tubacdk wrote:Image
Very cool horn. I was wondering what was up with the 5th valve on that, but your webpage did a good job of answering that.
User avatar
Dan Schultz
TubaTinker
TubaTinker
Posts: 10424
Joined: Thu Mar 18, 2004 10:46 pm
Location: Newburgh, Indiana
Contact:

Post by Dan Schultz »

Carl Wunderlich (GDR stencil)

Image

And this little Eb Frankenhelicon

Image
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
User avatar
bort
6 valves
6 valves
Posts: 11223
Joined: Wed Sep 22, 2004 11:08 pm
Location: Minneapolis, Minnesota

Post by bort »

From bassclefbrass.com...

Image
User avatar
armytuba
pro musician
pro musician
Posts: 99
Joined: Mon Sep 13, 2004 1:31 pm
Location: Atlanta, GA

Post by armytuba »

Image

My big "bare brass" baby: 1950's Amati 5/4 BBb Helicon with 4 clockspring valves.
Santos
User avatar
Highams
pro musician
pro musician
Posts: 793
Joined: Fri Mar 19, 2004 3:17 am
Location: Slough, Berkshire, England
Contact:

Post by Highams »

Aspire & Be Inspired !
User avatar
dmmorris
3 valves
3 valves
Posts: 426
Joined: Fri Mar 19, 2004 9:05 am
Location: From far away as Jupiter sulfur mines, way down by the methane sea.

Post by dmmorris »

beta 14??..........OK!

Mid 70's B&S Tuba
User avatar
Highams
pro musician
pro musician
Posts: 793
Joined: Fri Mar 19, 2004 3:17 am
Location: Slough, Berkshire, England
Contact:

Post by Highams »

Thanks Jonathan.

5th = semitone, same as the second, only by then, the bore has increased quite a bit and you can get a much bigger sound.

Remember the euph is not compensating so a lot of the 4th. valve notes are quite sharp, hence the 5th.

Once you get used to the uncomfortable holding position, yes, it sounds really nice.

CB
Aspire & Be Inspired !
oldbandnerd
5 valves
5 valves
Posts: 1031
Joined: Wed Dec 22, 2004 8:43 pm
Location: No matter where you go... there you are .
Contact:

Post by oldbandnerd »

Image
Rexcraft offical Boy Scouts of America bugle .
I keep it wrapped up in some clean rags so it will not tarnish as fast. If I could find a zip lock bag big enough to keep it in I would not have to polish it every month or so.

Image
Image
Post Reply