POLL: Deutsche kaiser contrabass B tuba club
-
- 6 valves
- Posts: 4230
- Joined: Wed Jan 07, 2015 9:44 am
- Location: With my fellow Thought Criminals
Re: POLL: Deutsche kaiser contrabass B tuba club
I’d like to answer but I think you are from the Government and trying to confiscate them.
No one needs a tuba that is that big!!
No one needs a tuba that is that big!!
I am committed to the advancement of civil rights, minus the Marxist intimidation and thuggery of BLM.
- tbonesullivan
- 4 valves
- Posts: 531
- Joined: Mon Oct 31, 2016 12:30 pm
- Location: New Jersey
Re: POLL: Deutsche kaiser contrabass B tuba club
One of these days I will finish saving up for my "Secret Siegfried" that I keep in the front hallway to bludgeon people into submission with its sheer glory.
Though, both the Siegfried and the the 497 Hagen are only just about 40 inches tall, so I guess they don't count?
Though, both the Siegfried and the the 497 Hagen are only just about 40 inches tall, so I guess they don't count?
Yamaha YBB-631S BBb Tuba, B&H Imperial Eb Tuba, Sterling / Perantucci 1065GHS Euphonium
Yamaha YBL-621 RII Bass Trombone and a bunch of other trombones
Yamaha YBL-621 RII Bass Trombone and a bunch of other trombones
- bort
- 6 valves
- Posts: 11223
- Joined: Wed Sep 22, 2004 11:08 pm
- Location: Minneapolis, Minnesota
Re: POLL: Deutsche kaiser contrabass B tuba club
Pictures, or it didn't happen.
-
- bugler
- Posts: 149
- Joined: Fri Jun 27, 2014 5:02 pm
Re: POLL: Deutsche kaiser contrabass B tuba club
With a minimum height of 45 Inches the Fafner and the one Rudy 5/4 I have seen are ruled out too.
Miraphone Norwegian Star
Yamaha YBB-632 Bb Neo
Yamaha YBB-632 Bb Neo
- tbonesullivan
- 4 valves
- Posts: 531
- Joined: Mon Oct 31, 2016 12:30 pm
- Location: New Jersey
Re: POLL: Deutsche kaiser contrabass B tuba club
I don't think the Miraphone 190s were that tall either. Just shy, at like 43.5 inches. The "big boys" produced these days seem to have bells that don't protrude nearly as far from the top. I think the MW 197 is 44.9 inches.Patrase wrote:With a minimum height of 45 Inches the Fafner and the one Rudy 5/4 I have seen are ruled out too.
Yamaha YBB-631S BBb Tuba, B&H Imperial Eb Tuba, Sterling / Perantucci 1065GHS Euphonium
Yamaha YBL-621 RII Bass Trombone and a bunch of other trombones
Yamaha YBL-621 RII Bass Trombone and a bunch of other trombones
- oedipoes
- 4 valves
- Posts: 765
- Joined: Wed Mar 26, 2008 3:47 pm
- Location: Belgium
Re: POLL: Deutsche kaiser contrabass B tuba club
I have my old B&F kaiser.
Fits all those specs if I remember well:
400mm bell (thanks for the correction), 21.5mm bore (21.2 originally, but gets a new valve set) and >1150mm tall
Currently being restored by Jake @ The Berliner Tuba, you can follow the restoration on his blog:
https://brassandpipes.wordpress.com/201 ... er-b-tuba/
Fits all those specs if I remember well:
400mm bell (thanks for the correction), 21.5mm bore (21.2 originally, but gets a new valve set) and >1150mm tall
Currently being restored by Jake @ The Berliner Tuba, you can follow the restoration on his blog:
https://brassandpipes.wordpress.com/201 ... er-b-tuba/
You do not have the required permissions to view the files attached to this post.
Last edited by oedipoes on Thu Sep 26, 2019 5:37 am, edited 2 times in total.
Re: POLL: Deutsche kaiser contrabass B tuba club
They're only taking the scary black plastic ones.Three Valves wrote:I’d like to answer but I think you are from the Government and trying to confiscate them.
No one needs a tuba that is that big!!
For now.
- Donn
- 6 valves
- Posts: 5977
- Joined: Fri Aug 19, 2005 3:58 pm
- Location: Seattle, ☯
Re: POLL: Deutsche kaiser contrabass B tuba club
extracted from the flickr brain damage:
- bort
- 6 valves
- Posts: 11223
- Joined: Wed Sep 22, 2004 11:08 pm
- Location: Minneapolis, Minnesota
Re: POLL: Deutsche kaiser contrabass B tuba club
Those are some very, very tall tubas!
- tbonesullivan
- 4 valves
- Posts: 531
- Joined: Mon Oct 31, 2016 12:30 pm
- Location: New Jersey
Re: POLL: Deutsche kaiser contrabass B tuba club
Maybe "clockwork springs" are needed for a TRUE Kaiser tuba. It's just not the same without them.
Yamaha YBB-631S BBb Tuba, B&H Imperial Eb Tuba, Sterling / Perantucci 1065GHS Euphonium
Yamaha YBL-621 RII Bass Trombone and a bunch of other trombones
Yamaha YBL-621 RII Bass Trombone and a bunch of other trombones
- edsel585960
- 5 valves
- Posts: 1507
- Joined: Sun Oct 09, 2011 4:28 pm
- Location: SW Florida
Re: POLL: Deutsche kaiser contrabass B tuba club
https://photos.app.goo.gl/UhxofseZLkNkCuLd9" target="_blank" My old Schediwy BBb. Mid 30's German horn.
Conn 20-21 J
Conn 10J, Conn 26 K, Martin Mammoth, Mirafone 186, Soviet Helicon, Holton Raincatcher Sousaphone, Yamaha 103, King 1240.
Conn 10J, Conn 26 K, Martin Mammoth, Mirafone 186, Soviet Helicon, Holton Raincatcher Sousaphone, Yamaha 103, King 1240.
- bort
- 6 valves
- Posts: 11223
- Joined: Wed Sep 22, 2004 11:08 pm
- Location: Minneapolis, Minnesota
Re: POLL: Deutsche kaiser contrabass B tuba club
Here is an original kaiser. Not mine. Could be yours for the $:
https://www.hornboerse.de/en/original-k ... -used.html
https://www.hornboerse.de/en/original-k ... -used.html
-
- 3 valves
- Posts: 276
- Joined: Mon Oct 26, 2015 4:42 pm
- Location: Copenhagen, Denmark
Re: POLL: Deutsche kaiser contrabass B tuba club
40mm bell ??? only twice the bore size ??? what a handy tuba!oedipoes wrote:I have my old B&F kaiser.
Fits all those specs if I remember well.
40mm bell, large bore and >1100mm tall
Yamaha YEB-321 Eb 4v TA tuba
Meinl-Weston 2141 Eb 5v FA tuba
Hirsbrunner Bb 3v TA compensated euph
Wessex Dolce Bb 3+1v TA compensated euph
Alto/tenor/bass trombones in various sizes/plugs
Meinl-Weston 2141 Eb 5v FA tuba
Hirsbrunner Bb 3v TA compensated euph
Wessex Dolce Bb 3+1v TA compensated euph
Alto/tenor/bass trombones in various sizes/plugs
- oedipoes
- 4 valves
- Posts: 765
- Joined: Wed Mar 26, 2008 3:47 pm
- Location: Belgium
Re: POLL: Deutsche kaiser contrabass B tuba club
oooooooops ...marccromme wrote:40mm bell ??? only twice the bore size ??? what a handy tuba!oedipoes wrote:I have my old B&F kaiser.
Fits all those specs if I remember well.
40mm bell, large bore and >1100mm tall
I have updated the original post, and added a picture.