4 valve baritone project

Repair and modification discussion
Post Reply
User avatar
Tubajug
5 valves
5 valves
Posts: 1712
Joined: Wed Jun 10, 2009 7:23 pm
Location: Lincoln, NE

4 valve baritone project

Post by Tubajug »

This is mostly a test of the imugr app (thanks to the elephant it's much better now!) and I know the photo is huge, but here is a 4 valve baritone project I've been working on. The 4th valve tubing and leadpipe are mostly just dry fitted. I'm sure I'll have some trimming to do to get it in tune.

Image
Last edited by Tubajug on Thu Jan 25, 2018 9:39 am, edited 1 time in total.
Jordan
King 2341 with a Holton "Monster" Eb bell
Eb Frankentuba
Martin Medium Eb Helicon

If at first you don't succeed, skydiving's probably not for you.
TheGoyWonder
4 valves
4 valves
Posts: 565
Joined: Tue Mar 03, 2015 8:11 am

Re: 4 valve baritone project

Post by TheGoyWonder »

Imgur has many size options. Try "Large Thumbnail"
User avatar
roweenie
pro musician
pro musician
Posts: 2165
Joined: Mon Mar 05, 2007 10:17 am
Location: Waiting on a vintage tow truck

Re: 4 valve baritone project

Post by roweenie »

Looks like a York, to me.... 8)
"Even a broken clock is right twice a day".
User avatar
Tubajug
5 valves
5 valves
Posts: 1712
Joined: Wed Jun 10, 2009 7:23 pm
Location: Lincoln, NE

Re: 4 valve baritone project

Post by Tubajug »

roweenie wrote:Looks like a York, to me.... 8)
It is! The engraving on the bell has the very "pointy" letters, so the "O" looks like a triangle, kind of making it look like "YARK."
Jordan
King 2341 with a Holton "Monster" Eb bell
Eb Frankentuba
Martin Medium Eb Helicon

If at first you don't succeed, skydiving's probably not for you.
User avatar
Tubajug
5 valves
5 valves
Posts: 1712
Joined: Wed Jun 10, 2009 7:23 pm
Location: Lincoln, NE

Re: 4 valve baritone project

Post by Tubajug »

TheGoyWonder wrote:Imgur has many size options. Try "Large Thumbnail"
I was using the app on my phone, I'll have to play around with it on a computer more later. Thanks for the tip!
Jordan
King 2341 with a Holton "Monster" Eb bell
Eb Frankentuba
Martin Medium Eb Helicon

If at first you don't succeed, skydiving's probably not for you.
User avatar
Tubajug
5 valves
5 valves
Posts: 1712
Joined: Wed Jun 10, 2009 7:23 pm
Location: Lincoln, NE

Re: 4 valve baritone project

Post by Tubajug »

The valveblock is all soldered in place, so the next step will be to tape it to the bugle and play test it! I'm betting I made the 4th valve a bit long, so it will likely need to be trimmed (Thanks to DaveC for tips on posting images from my google drive!).

Image

Image

That rectangle in the upper left corner must have come from editing the photo in "Paint." Whoops!
Image
Last edited by Tubajug on Thu Feb 08, 2018 12:12 pm, edited 1 time in total.
Jordan
King 2341 with a Holton "Monster" Eb bell
Eb Frankentuba
Martin Medium Eb Helicon

If at first you don't succeed, skydiving's probably not for you.
DaveC
lurker
lurker
Posts: 11
Joined: Sat Jan 13, 2018 6:57 pm

Re: 4 valve baritone project

Post by DaveC »

Nice work! Can't wait to hear how it plays. I'm planning on making my 4th valve tubing on the long side and trimming to tune also, seems easier that adding tubing.,
User avatar
Tubajug
5 valves
5 valves
Posts: 1712
Joined: Wed Jun 10, 2009 7:23 pm
Location: Lincoln, NE

Re: 4 valve baritone project

Post by Tubajug »

Here it is with the valveset now soldered to the bugle. No leaks that I could find. All I have left is to put the thumb ring on, clean up the solder/flux messes, give it another bath, then put it all together and play test it! I'll probably have to trim the fourth valve a bit, and add a brace under the bottom section of the fourth valve tubing for better stability, but I'm glad it's all back in one piece!

Image
Jordan
King 2341 with a Holton "Monster" Eb bell
Eb Frankentuba
Martin Medium Eb Helicon

If at first you don't succeed, skydiving's probably not for you.
User avatar
Tubajug
5 valves
5 valves
Posts: 1712
Joined: Wed Jun 10, 2009 7:23 pm
Location: Lincoln, NE

Re: 4 valve baritone project

Post by Tubajug »

I got it all cleaned up and put back together! The fourth valve is a bit flat, so I'll get to trimming it another time. The bell still has a patina I need to polish off from when I stripped the lacquer. Overall I'm very pleased with my work for my first major alteration project.

Image

Image
Jordan
King 2341 with a Holton "Monster" Eb bell
Eb Frankentuba
Martin Medium Eb Helicon

If at first you don't succeed, skydiving's probably not for you.
Post Reply