None of my mouthpieces seem to fit properly in the leadpipe of my Cerveny AEB 641 Eb.
I like my PT-72-S, but you can see that it does not go in very far.
Observing the inner diameter of the leadpipe, one notices an inner ring that seems to diminish that measure.
I do not know enough.
Would some kind of modification to the horn make sense, or have I not found the right mouthpiece?
What am I missing?
Thanks!
Cerveny AEB 641 Eb Leadpipe and Mouthpiece
- leningrad
- lurker
- Posts: 6
- Joined: Sun Aug 09, 2015 5:35 pm
Cerveny AEB 641 Eb Leadpipe and Mouthpiece
You do not have the required permissions to view the files attached to this post.
Wessex TF135 Bubbie 5 - F/Eb
V.F.Červený AEB-641 - Eb
Mack Brass TU421S - CC
1968 Ленингра́д (Leningrad) - BBb
V.F.Červený AEB-641 - Eb
Mack Brass TU421S - CC
1968 Ленингра́д (Leningrad) - BBb
-
- bugler
- Posts: 20
- Joined: Thu Nov 01, 2018 9:01 pm
Re: Cerveny AEB 641 Eb Leadpipe and Mouthpiece
is your PT an american shank? if not, get one
Cerveny leadpipes go all the way to the end, the sleeve is just for protection and mounting to the bell. There is no receiver in the traditional way
Cerveny leadpipes go all the way to the end, the sleeve is just for protection and mounting to the bell. There is no receiver in the traditional way
- leningrad
- lurker
- Posts: 6
- Joined: Sun Aug 09, 2015 5:35 pm
Re: Cerveny AEB 641 Eb Leadpipe and Mouthpiece
Yes, the PT mouthpiece has the smaller shank offered.
Thank you for the info!
Thank you for the info!
Wessex TF135 Bubbie 5 - F/Eb
V.F.Červený AEB-641 - Eb
Mack Brass TU421S - CC
1968 Ленингра́д (Leningrad) - BBb
V.F.Červený AEB-641 - Eb
Mack Brass TU421S - CC
1968 Ленингра́д (Leningrad) - BBb