Removing solder inside tubing

Repair and modification discussion
Post Reply
User avatar
Tubajug
5 valves
5 valves
Posts: 1712
Joined: Wed Jun 10, 2009 7:23 pm
Location: Lincoln, NE

Removing solder inside tubing

Post by Tubajug »

What's the easiest way you've found to remove solder from the inside of tubing after taking things apart?
Jordan
King 2341 with a Holton "Monster" Eb bell
Eb Frankentuba
Martin Medium Eb Helicon

If at first you don't succeed, skydiving's probably not for you.
Top
User avatar
Dan Schultz
TubaTinker
TubaTinker
Posts: 10424
Joined: Thu Mar 18, 2004 10:46 pm
Location: Newburgh, Indiana
Contact:
Contact Dan Schultz

Re: Removing solder inside tubing

Post by Dan Schultz »

I heat it up a bit and use a round brush to draw it out.
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
Top
User avatar
Tubajug
5 valves
5 valves
Posts: 1712
Joined: Wed Jun 10, 2009 7:23 pm
Location: Lincoln, NE

Re: Removing solder inside tubing

Post by Tubajug »

A round wire brush?
Jordan
King 2341 with a Holton "Monster" Eb bell
Eb Frankentuba
Martin Medium Eb Helicon

If at first you don't succeed, skydiving's probably not for you.
Top
User avatar
Dan Schultz
TubaTinker
TubaTinker
Posts: 10424
Joined: Thu Mar 18, 2004 10:46 pm
Location: Newburgh, Indiana
Contact:
Contact Dan Schultz

Re: Removing solder inside tubing

Post by Dan Schultz »

Tubajug wrote:A round wire brush?
Mouthpiece or slide brush. Eventually the fibers will break or melt but they last for a good while.
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
Top
Post Reply

Return to “Repair/Mod”