Found!

Repair and modification discussion
Post Reply
11annienorm
TubeNet Sponsor
TubeNet Sponsor
Posts: 64
Joined: Thu Mar 04, 2010 9:33 pm
Location: Louisville, KY
Contact:

Found!

Post by 11annienorm »

Hello!

Looking for ANY Kanstul tuba rotor valve and casing. Hopefully someone has one lying around somewhere or knows someone that has one lying around somewhere.
It doesn’t matter when or what size. Any Kanstul tuba rotor will do.

Thanks!!
Norm
Last edited by 11annienorm on Thu Apr 15, 2021 11:06 pm, edited 3 times in total.
Norman Epley
Instrument Repair Tech
Owner: NRE Brassworks LLC
Easy Mac
bugler
bugler
Posts: 172
Joined: Sun Sep 06, 2020 3:43 pm

Re: Looking for a Kanstul tuba rotor

Post by Easy Mac »

Knowing the bore size would help. Do you want the early rotor style or the later "CR" style.
11annienorm
TubeNet Sponsor
TubeNet Sponsor
Posts: 64
Joined: Thu Mar 04, 2010 9:33 pm
Location: Louisville, KY
Contact:

Re: Looking for a Kanstul tuba rotor

Post by 11annienorm »

It’s on the Model 80 F tuba. I can get you measurements very soon.
What’s an email for you and I can send pictures also.

Your help would be greatly appreciated.
Norm
Norman Epley
Instrument Repair Tech
Owner: NRE Brassworks LLC
11annienorm
TubeNet Sponsor
TubeNet Sponsor
Posts: 64
Joined: Thu Mar 04, 2010 9:33 pm
Location: Louisville, KY
Contact:

Re: Looking for a Kanstul tuba rotor

Post by 11annienorm »

Bore is .725
Norman Epley
Instrument Repair Tech
Owner: NRE Brassworks LLC
Easy Mac
bugler
bugler
Posts: 172
Joined: Sun Sep 06, 2020 3:43 pm

Re: Looking for a Kanstul tuba rotor

Post by Easy Mac »

I don't have one. I was pointing out that you left out some pretty crucial information if you want help locating one of these. Just trying to help. There are several valves in different sizes.

Good luck!
11annienorm
TubeNet Sponsor
TubeNet Sponsor
Posts: 64
Joined: Thu Mar 04, 2010 9:33 pm
Location: Louisville, KY
Contact:

Re: Looking for ANY Kanstul tuba rotor

Post by 11annienorm »

Thanks for the input. I should have been more clear.
I’m looking for any Kanstul tuba rotor.
Any style or size would be great. I can make just about anything fit with the project I have going on, but it just has to be a Kanstul rotor and casing.
Norman Epley
Instrument Repair Tech
Owner: NRE Brassworks LLC
TheodoreSmith
bugler
bugler
Posts: 127
Joined: Wed Feb 26, 2020 11:30 am
Location: North Indiana

Re: Looking for ANY Kanstul tuba rotor

Post by TheodoreSmith »

11annienorm wrote: Sat Apr 03, 2021 9:04 am Thanks for the input. I should have been more clear.
I’m looking for any Kanstul tuba rotor.
Any style or size would be great. I can make just about anything fit with the project I have going on, but it just has to be a Kanstul rotor and casing.
What kinda project? :D
B&S PT-7PS
Yamaha Yeb-321
11annienorm
TubeNet Sponsor
TubeNet Sponsor
Posts: 64
Joined: Thu Mar 04, 2010 9:33 pm
Location: Louisville, KY
Contact:

Re: Found!

Post by 11annienorm »

Restoration project. I’ll post on my page once I get the valves back from the platers.
Norman Epley
Instrument Repair Tech
Owner: NRE Brassworks LLC
Post Reply