MAW valves for sale Bookmark and Share

Sell personal equipment
Forum rules
This is for selling your personal equipment, but sponsored selling is allowed as well. We are requiring all ads to have the following information. Price, Brand, Model, and location (for instruments, not accessories) need to be included in the ad, or at least be very clear in link provided. It is acceptable to link to an external ad if you are promoting a sale of your personal equipment. No Ebay Auctions, but Buy it now listings are fine. Photos are HIGHLY suggested as well. If you see an ad that does not meet these criteria, please report it.

MAW valves for sale

Postby Mocktuba1991 » Tue Jun 19, 2018 5:04 pm

I’m selling my MAW valves that I used on my 2165 for about 3 years. These Valves Will fit ANY large valve block B&S and Meinl Weston tubas.

$950. I’ll also include FREE SHIPPING!! And a set of purple dragon skin finger buttons.

https://photos.app.goo.gl/xxJWkXJENn5uquWU8" target="_blank" target="_blank
Last edited by Mocktuba1991 on Mon Jul 02, 2018 5:00 pm, edited 2 times in total.
Mocktuba1991
bugler
bugler
 
Posts: 28
Joined: Sun Jun 21, 2015 4:29 pm

Re: MAW valves for sale

Postby the elephant » Tue Jun 19, 2018 9:03 pm

What are your plans for the old valve/slide section?
Image
User avatar
the elephant
Papa Legba
Papa Legba
 
Posts: 13789
Joined: Wed Apr 07, 2004 8:38 pm
Location: 404 Not Found

Re: MAW valves for sale

Postby Mocktuba1991 » Wed Jun 20, 2018 8:43 am

I decided to keep the parts. For some future projects I want to get into. So they are not for sale.
Mocktuba1991
bugler
bugler
 
Posts: 28
Joined: Sun Jun 21, 2015 4:29 pm

Re: MAW valves for sale

Postby Mocktuba1991 » Mon Jul 02, 2018 4:58 pm

Bump! For pictures and important updates!.
Mocktuba1991
bugler
bugler
 
Posts: 28
Joined: Sun Jun 21, 2015 4:29 pm

Re: MAW valves for sale

Postby RoosterTuba » Mon Jul 02, 2018 10:24 pm

Any model? What about Wisemann 900? (B&S PT-6 copy)
Stefan Roose

GA Butler University
Wisemann 5/4 CC Tuba
Mack Brass "PT-15"
User avatar
RoosterTuba
bugler
bugler
 
Posts: 70
Joined: Fri Jan 02, 2015 8:05 pm

Re: MAW valves for sale

Postby thevillagetuba » Mon Jul 02, 2018 10:32 pm

RoosterTuba wrote:Any model? What about Wisemann 900? (B&S PT-6 copy)


These MAW valves will fit some Wisemanns, but not all. These were not made with consistent valve and casing diameters, so some drop in some are too loose.
Robert S. Pratt, CPT
MM Tuba Perf. - Wright State University
BM Tuba Perf. - Towson University
User avatar
thevillagetuba
4 valves
4 valves
 
Posts: 646
Joined: Thu Apr 21, 2011 9:40 am
Location: Cleveland, OH

Re: MAW valves for sale

Postby Ken Crawford » Mon Jul 02, 2018 11:28 pm

thevillagetuba wrote:
RoosterTuba wrote:Any model? What about Wisemann 900? (B&S PT-6 copy)


These MAW valves will fit some Wisemanns, but not all. These were not made with consistent valve and casing diameters, so some drop in some are too loose.


They can be nickel plated to make them larger. Martin Wilk has a guy that does a great job at it.
User avatar
Ken Crawford
4 valves
4 valves
 
Posts: 701
Joined: Sat Jun 23, 2012 10:45 am
Location: Rexburg, ID

Re: MAW valves for sale

Postby Mocktuba1991 » Wed Jul 04, 2018 5:48 am

thevillagetuba wrote:
RoosterTuba wrote:Any model? What about Wisemann 900? (B&S PT-6 copy)


These MAW valves will fit some Wisemanns, but not all. These were not made with consistent valve and casing diameters, so some drop in some are too loose.


They will fit the Wisemann Pt-6 copy as well. I used them on a large valve block 2165. So I doubt they would be loose on the wisemann
Mocktuba1991
bugler
bugler
 
Posts: 28
Joined: Sun Jun 21, 2015 4:29 pm

Re: MAW valves for sale

Postby thevillagetuba » Wed Jul 04, 2018 9:10 am

Mocktuba1991 wrote:
thevillagetuba wrote:
RoosterTuba wrote:Any model? What about Wisemann 900? (B&S PT-6 copy)


These MAW valves will fit some Wisemanns, but not all. These were not made with consistent valve and casing diameters, so some drop in some are too loose.


They will fit the Wisemann Pt-6 copy as well. I used them on a large valve block 2165. So I doubt they would be loose on the wisemann


It depends on the vintage of the Wisemann. There were 3 Wisemanns where I did my Master's and MAW valves were loose in 2 of them (they were from the last batch or two to come through MackBrass) but fit perfectly in one of them (it was from the first couple of batches). So, its possible they will fit, but there is no guarantee, though they can always be played up to fit if they are loose.
Last edited by thevillagetuba on Wed Jul 04, 2018 3:52 pm, edited 1 time in total.
Robert S. Pratt, CPT
MM Tuba Perf. - Wright State University
BM Tuba Perf. - Towson University
User avatar
thevillagetuba
4 valves
4 valves
 
Posts: 646
Joined: Thu Apr 21, 2011 9:40 am
Location: Cleveland, OH

Re: MAW valves for sale

Postby BBruce107 » Wed Jul 04, 2018 3:47 pm

Do these fit the Big Mouth Brass 6/4 tubas? I have been toying with the idea seeing if these would work in the horn however I do not know if they will fit it properly.
Brandon Bruce
Alma Symphony Orchestra
BBruce107
bugler
bugler
 
Posts: 248
Joined: Sun Jun 15, 2014 4:24 pm
Location: Michigan

Re: MAW valves for sale

Postby bort » Wed Jul 04, 2018 3:51 pm

Does this include anything for valve alignment?
B&S 4198 (PT-7P)
User avatar
bort
6 valves
6 valves
 
Posts: 9606
Joined: Wed Sep 22, 2004 11:08 pm
Location: Minneapolis, Minnesota

Re: MAW valves for sale

Postby Mocktuba1991 » Thu Jul 05, 2018 10:52 am

bort wrote:Does this include anything for valve alignment?


Yes, I can throw in the PVAK that I used on it as well.
Mocktuba1991
bugler
bugler
 
Posts: 28
Joined: Sun Jun 21, 2015 4:29 pm

Re: MAW valves for sale

Postby Mocktuba1991 » Mon Jul 09, 2018 5:19 pm

Bump!! Still for sale. Got a lot of interest so far.
Mocktuba1991
bugler
bugler
 
Posts: 28
Joined: Sun Jun 21, 2015 4:29 pm

Re: MAW valves for sale

Postby Ken Crawford » Mon Jul 09, 2018 9:15 pm

BBruce107 wrote:Do these fit the Big Mouth Brass 6/4 tubas? I have been toying with the idea seeing if these would work in the horn however I do not know if they will fit it properly.


No. Apparently Martin and Dick talked about it in passing but it never happened. You could probably send Martin your whole tuba for several months and he could make it happen.
User avatar
Ken Crawford
4 valves
4 valves
 
Posts: 701
Joined: Sat Jun 23, 2012 10:45 am
Location: Rexburg, ID

Re: MAW valves for sale

Postby Mocktuba1991 » Wed Jul 18, 2018 9:13 am

Bump!!!!!
Mocktuba1991
bugler
bugler
 
Posts: 28
Joined: Sun Jun 21, 2015 4:29 pm


Return to For Sale by Owner

Who is online

Users browsing this forum: Bigsum90, circusboy, DouglasJB, pittbassdaddy, The Brass Gamer and 28 guests