MAW valves for sale
Forum rules
This forum is for buying or selling your personal equipment. Sponsored selling is allowed as well. All ads are required to have the following information: Price (even for trades), brand, model, and location (City and State, for instruments, not accessories). It is acceptable to link to an external ad if you are promoting a sale of your personal equipment. No Ebay auctions, but "Buy It Now" listings are fine. Photos are HIGHLY suggested as well, and may be hosted on Google Drive, or elsewhere. If you see an ad that does not meet these criteria, please report it.
This forum is for buying or selling your personal equipment. Sponsored selling is allowed as well. All ads are required to have the following information: Price (even for trades), brand, model, and location (City and State, for instruments, not accessories). It is acceptable to link to an external ad if you are promoting a sale of your personal equipment. No Ebay auctions, but "Buy It Now" listings are fine. Photos are HIGHLY suggested as well, and may be hosted on Google Drive, or elsewhere. If you see an ad that does not meet these criteria, please report it.
-
- bugler
- Posts: 61
- Joined: Sun Jun 21, 2015 4:29 pm
MAW valves for sale
I’m selling my MAW valves that I used on my 2165 for about 3 years. These Valves Will fit ANY large valve block B&S and Meinl Weston tubas.
$950. I’ll also include FREE SHIPPING!! And a set of purple dragon skin finger buttons.
https://photos.app.goo.gl/xxJWkXJENn5uquWU8" target="_blank" target="_blank" target="_blank
$950. I’ll also include FREE SHIPPING!! And a set of purple dragon skin finger buttons.
https://photos.app.goo.gl/xxJWkXJENn5uquWU8" target="_blank" target="_blank" target="_blank
Last edited by Mocktuba1991 on Mon Jul 02, 2018 5:00 pm, edited 2 times in total.
-
- bugler
- Posts: 61
- Joined: Sun Jun 21, 2015 4:29 pm
Re: MAW valves for sale
I decided to keep the parts. For some future projects I want to get into. So they are not for sale.
-
- bugler
- Posts: 61
- Joined: Sun Jun 21, 2015 4:29 pm
Re: MAW valves for sale
Bump! For pictures and important updates!.
- RoosterTuba
- bugler
- Posts: 87
- Joined: Fri Jan 02, 2015 7:05 pm
Re: MAW valves for sale
Any model? What about Wisemann 900? (B&S PT-6 copy)
Stefan Roose
GA Butler University
Wisemann 5/4 CC Tuba
Mack Brass "PT-15"
GA Butler University
Wisemann 5/4 CC Tuba
Mack Brass "PT-15"
- thevillagetuba
- 4 valves
- Posts: 695
- Joined: Thu Apr 21, 2011 9:40 am
- Location: Cleveland, OH
- Contact:
Re: MAW valves for sale
These MAW valves will fit some Wisemanns, but not all. These were not made with consistent valve and casing diameters, so some drop in some are too loose.RoosterTuba wrote:Any model? What about Wisemann 900? (B&S PT-6 copy)
Robert S. Pratt
B.M., M.M. Tuba Performance
Getzen G60 prototype
B.M., M.M. Tuba Performance
Getzen G60 prototype
- Ken Crawford
- 4 valves
- Posts: 722
- Joined: Sat Jun 23, 2012 10:45 am
- Location: Rexburg, ID
Re: MAW valves for sale
They can be nickel plated to make them larger. Martin Wilk has a guy that does a great job at it.thevillagetuba wrote:These MAW valves will fit some Wisemanns, but not all. These were not made with consistent valve and casing diameters, so some drop in some are too loose.RoosterTuba wrote:Any model? What about Wisemann 900? (B&S PT-6 copy)
-
- bugler
- Posts: 61
- Joined: Sun Jun 21, 2015 4:29 pm
Re: MAW valves for sale
thevillagetuba wrote:These MAW valves will fit some Wisemanns, but not all. These were not made with consistent valve and casing diameters, so some drop in some are too loose.RoosterTuba wrote:Any model? What about Wisemann 900? (B&S PT-6 copy)
They will fit the Wisemann Pt-6 copy as well. I used them on a large valve block 2165. So I doubt they would be loose on the wisemann
- thevillagetuba
- 4 valves
- Posts: 695
- Joined: Thu Apr 21, 2011 9:40 am
- Location: Cleveland, OH
- Contact:
Re: MAW valves for sale
It depends on the vintage of the Wisemann. There were 3 Wisemanns where I did my Master's and MAW valves were loose in 2 of them (they were from the last batch or two to come through MackBrass) but fit perfectly in one of them (it was from the first couple of batches). So, its possible they will fit, but there is no guarantee, though they can always be played up to fit if they are loose.Mocktuba1991 wrote:thevillagetuba wrote:These MAW valves will fit some Wisemanns, but not all. These were not made with consistent valve and casing diameters, so some drop in some are too loose.RoosterTuba wrote:Any model? What about Wisemann 900? (B&S PT-6 copy)
They will fit the Wisemann Pt-6 copy as well. I used them on a large valve block 2165. So I doubt they would be loose on the wisemann
Last edited by thevillagetuba on Wed Jul 04, 2018 3:52 pm, edited 1 time in total.
Robert S. Pratt
B.M., M.M. Tuba Performance
Getzen G60 prototype
B.M., M.M. Tuba Performance
Getzen G60 prototype
-
- 3 valves
- Posts: 454
- Joined: Sun Jun 15, 2014 4:24 pm
- Location: Michigan
Re: MAW valves for sale
Do these fit the Big Mouth Brass 6/4 tubas? I have been toying with the idea seeing if these would work in the horn however I do not know if they will fit it properly.
Brandon Bruce
Principal Tuba Gaylord Symphony Orchestra
Principal Tuba Alpena Symphony Orchestra
Principal Tuba Gaylord Symphony Orchestra
Principal Tuba Alpena Symphony Orchestra
- bort
- 6 valves
- Posts: 11222
- Joined: Wed Sep 22, 2004 11:08 pm
- Location: Minneapolis, Minnesota
Re: MAW valves for sale
Does this include anything for valve alignment?
-
- bugler
- Posts: 61
- Joined: Sun Jun 21, 2015 4:29 pm
Re: MAW valves for sale
bort wrote:Does this include anything for valve alignment?
Yes, I can throw in the PVAK that I used on it as well.
-
- bugler
- Posts: 61
- Joined: Sun Jun 21, 2015 4:29 pm
Re: MAW valves for sale
Bump!! Still for sale. Got a lot of interest so far.
- Ken Crawford
- 4 valves
- Posts: 722
- Joined: Sat Jun 23, 2012 10:45 am
- Location: Rexburg, ID
Re: MAW valves for sale
No. Apparently Martin and Dick talked about it in passing but it never happened. You could probably send Martin your whole tuba for several months and he could make it happen.BBruce107 wrote:Do these fit the Big Mouth Brass 6/4 tubas? I have been toying with the idea seeing if these would work in the horn however I do not know if they will fit it properly.
-
- bugler
- Posts: 61
- Joined: Sun Jun 21, 2015 4:29 pm
Re: MAW valves for sale
Bump!!!!!
- sc_curtis
- pro musician
- Posts: 597
- Joined: Sun Sep 18, 2005 11:47 pm
- Location: Houston, TX
- Contact:
Re: MAW valves for sale
Are these still for sale?
PM sent
PM sent
www.thetubaplayer.com
Current stable:
PT6
Meinl Weston 2250
Rudolf Meinl 3/4 CC
YFB621S
YCB621S
Custom BBb Cimbasso
Current stable:
PT6
Meinl Weston 2250
Rudolf Meinl 3/4 CC
YFB621S
YCB621S
Custom BBb Cimbasso