Finger Buttons 8-32, Heavy Bottom Caps, Top Caps FS
Posted: Fri Dec 06, 2019 8:13 am
I have an assortment of extra parts from my now departed Conn that I have sitting around and would like to part with
There are an assortment of 8-32 raw brass finger buttons ( 7 + 4 = 11 total) Machined smooth buttons are sold. Only ones with notch for pearls are left. I had experimented with trying to make unique pearls for the first two types, but it turned out to not be worth the time/work.
I would prefer to sell the LOT of them - $90 +s/h but will entertain breaking them up in sets if someone really wants just four.
SOLD - Next are a set of 4 Heavy Weight Bottom Caps, gold plated - $40 obo +s/h. That I had crafted for my Conn 52J - two had taken tumbles over the years and are slightly out of round, but they still screwed onto the valves with little trouble. I am not sure if these are a standard threading for Conn (and the like) valve sets or if they will only work on the newer 5xJ's, I have never tried them on anything else.
Finally 4 Top valve caps -$25 + s/h from the same 52J (5xJ) that also were gold plated, albeit lightly so you can see the silver peaking through, so with minimal effort these would become silver again.
Photos of everything including some caliper measurements of dimensions. https://drive.google.com/open?id=1kyna_ ... L2QR6jfl1O
$110 takes everything left and I'll cover shipping.
Paypal preferred, but can accept a myriad of payment methods if needed.
There are an assortment of 8-32 raw brass finger buttons ( 7 + 4 = 11 total) Machined smooth buttons are sold. Only ones with notch for pearls are left. I had experimented with trying to make unique pearls for the first two types, but it turned out to not be worth the time/work.
I would prefer to sell the LOT of them - $90 +s/h but will entertain breaking them up in sets if someone really wants just four.
SOLD - Next are a set of 4 Heavy Weight Bottom Caps, gold plated - $40 obo +s/h. That I had crafted for my Conn 52J - two had taken tumbles over the years and are slightly out of round, but they still screwed onto the valves with little trouble. I am not sure if these are a standard threading for Conn (and the like) valve sets or if they will only work on the newer 5xJ's, I have never tried them on anything else.
Finally 4 Top valve caps -$25 + s/h from the same 52J (5xJ) that also were gold plated, albeit lightly so you can see the silver peaking through, so with minimal effort these would become silver again.
Photos of everything including some caliper measurements of dimensions. https://drive.google.com/open?id=1kyna_ ... L2QR6jfl1O
$110 takes everything left and I'll cover shipping.
Paypal preferred, but can accept a myriad of payment methods if needed.