Sousaphone, Bell, Tubas, case & others for sale
Posted: Sat Aug 29, 2020 5:25 pm
It turns out that there IS such a thing as too many tubas, so here's a few things I have for sale.
Email me with any questions. weskrygsmanATgmailDOTcom
Also willing to video chat someone to show more details about any of these.
1. King/Cleveland Fiberglass sousaphone $975 or best offer
https://www.facebook.com/marketplace/it ... 482023835/
BBb with 3 valves. All valves and slides work well. It comes with a gooseneck, but you’ll need 2 tuning bits and your own mouthpiece. The bell is missing a small section of the edge that cracked off.
While it is playable as it is, it has been well used and could use some minor repairs which I’ll list here.
-Missing a brace/bracket (see the masking tape in pics)
-bell collar (body side) could be more stable
-a few solder joints/braces were done sloppily.
-someone who knows about fiberglass/plastic could fix the bell chip (auto body shop perhaps?)
2. King/Cleveland Sousaphone 24" Bell $250 or best offer
https://www.facebook.com/marketplace/it ... 166890165/
The engraving on the bell says Cleveland Instrument Co. It’s has a 6.25 inch bell collar and should fit many King sousaphones or even King tubas with removable bells as well. It could be shined up, but so many people like the patina, I have not taken any time to shine it.
3. Set of Three (3) Yamaha YBB103's with 1 case $1500 or best offer
https://www.facebook.com/marketplace/it ... 096762995/
I have for sale 3 Yamaha YBB103 tubas, all 3/4, three valve BBflats, in various stages of repair/disrepair with 1 hard case. My original plan was to put 2 of them together to make a 4 valve version, but I never got around to it. All 3 tubas are dented and well used. One is missing parts.
In the main picture, the one on the left is the only one that is currently playable as is.
The middle one needs valve work on the 3rd valve, the bottom valve cap for the 3rd valve, and for braces to be soldered to be made playable.
The last one is a part horns for sure, since it’s so beat up and missing parts.
I’m hoping to sell all 3 together for $1500 or best offer, but here’s how I broke down the price.
Tuba 1(playable as is)-$750
Tuba 2(needs 3rd valve work)-$450
Tuba 3(for parts)-$150
Case-$150
4. Soundwear Tuba Gigbag/Case $600 or best offer
https://www.facebook.com/marketplace/it ... 227580005/
An amazing tuba case that’s no longer made. Super padded, very protective, and made extremely well. This was a custom order directly from Germany back when they started doing tuba cases. This was the first one they did for a piston valve tuba so it’s a bit oversized. It was made for my 6/4 Nirschl York tuba and will definitely fit any other similar sized tuba, as well as smaller tubas(with the extra insert) or a little larger (with no insert).
The zippers began to come apart, as these were known to do, and I had them repaired by a luggage place who used heavier duty zippers.
5. Getzen Elkhorn Single French Horn $200 or best offer
https://www.facebook.com/marketplace/it ... 013807340/
Single horn in F, Elkhorn By getzen. A few dents and dings but plays pretty well. Valves work well, slides are stuck, and i havent spent any time trying to free them. With a little TLC and a cleaning, it could be a great instrument. Comes with Conn hard case and Yamaha 30 mouthpiece.
6. Belmonte Woodwinds combo instrument stand $40 or best offer
https://www.facebook.com/marketplace/it ... 461750041/
Belmonte woodwinds combo instrument stand. Holds one saxophone (alto or possibly a tenor), and has 2 side pegs, one is smaller diameter to hold a flute, the other's for clarinet.
7. Set of 2 desktop or workstation edge clear plastic music stands $50 for both, $30 each, or best offer
https://www.facebook.com/marketplace/it ... 702759386/
2 clear plastic music stands for desktop workstation use. They can slide on the edge of some workstations (I think they're Wenger). Sheet music not included
Various electronic equipement, not sure what they both do, but somehow ended up with them
8. Alexis NanoCompressor $50 or best offer
https://www.facebook.com/marketplace/it ... 106793271/
Comes with adapter and manual.
9. Tascam RC-88 Remote control $50 or best offer
https://www.facebook.com/marketplace/it ... 810482791/
I think this is for Analog video editing
Email me with any questions. weskrygsmanATgmailDOTcom
Also willing to video chat someone to show more details about any of these.
Email me with any questions. weskrygsmanATgmailDOTcom
Also willing to video chat someone to show more details about any of these.
1. King/Cleveland Fiberglass sousaphone $975 or best offer
https://www.facebook.com/marketplace/it ... 482023835/
BBb with 3 valves. All valves and slides work well. It comes with a gooseneck, but you’ll need 2 tuning bits and your own mouthpiece. The bell is missing a small section of the edge that cracked off.
While it is playable as it is, it has been well used and could use some minor repairs which I’ll list here.
-Missing a brace/bracket (see the masking tape in pics)
-bell collar (body side) could be more stable
-a few solder joints/braces were done sloppily.
-someone who knows about fiberglass/plastic could fix the bell chip (auto body shop perhaps?)
2. King/Cleveland Sousaphone 24" Bell $250 or best offer
https://www.facebook.com/marketplace/it ... 166890165/
The engraving on the bell says Cleveland Instrument Co. It’s has a 6.25 inch bell collar and should fit many King sousaphones or even King tubas with removable bells as well. It could be shined up, but so many people like the patina, I have not taken any time to shine it.
3. Set of Three (3) Yamaha YBB103's with 1 case $1500 or best offer
https://www.facebook.com/marketplace/it ... 096762995/
I have for sale 3 Yamaha YBB103 tubas, all 3/4, three valve BBflats, in various stages of repair/disrepair with 1 hard case. My original plan was to put 2 of them together to make a 4 valve version, but I never got around to it. All 3 tubas are dented and well used. One is missing parts.
In the main picture, the one on the left is the only one that is currently playable as is.
The middle one needs valve work on the 3rd valve, the bottom valve cap for the 3rd valve, and for braces to be soldered to be made playable.
The last one is a part horns for sure, since it’s so beat up and missing parts.
I’m hoping to sell all 3 together for $1500 or best offer, but here’s how I broke down the price.
Tuba 1(playable as is)-$750
Tuba 2(needs 3rd valve work)-$450
Tuba 3(for parts)-$150
Case-$150
4. Soundwear Tuba Gigbag/Case $600 or best offer
https://www.facebook.com/marketplace/it ... 227580005/
An amazing tuba case that’s no longer made. Super padded, very protective, and made extremely well. This was a custom order directly from Germany back when they started doing tuba cases. This was the first one they did for a piston valve tuba so it’s a bit oversized. It was made for my 6/4 Nirschl York tuba and will definitely fit any other similar sized tuba, as well as smaller tubas(with the extra insert) or a little larger (with no insert).
The zippers began to come apart, as these were known to do, and I had them repaired by a luggage place who used heavier duty zippers.
5. Getzen Elkhorn Single French Horn $200 or best offer
https://www.facebook.com/marketplace/it ... 013807340/
Single horn in F, Elkhorn By getzen. A few dents and dings but plays pretty well. Valves work well, slides are stuck, and i havent spent any time trying to free them. With a little TLC and a cleaning, it could be a great instrument. Comes with Conn hard case and Yamaha 30 mouthpiece.
6. Belmonte Woodwinds combo instrument stand $40 or best offer
https://www.facebook.com/marketplace/it ... 461750041/
Belmonte woodwinds combo instrument stand. Holds one saxophone (alto or possibly a tenor), and has 2 side pegs, one is smaller diameter to hold a flute, the other's for clarinet.
7. Set of 2 desktop or workstation edge clear plastic music stands $50 for both, $30 each, or best offer
https://www.facebook.com/marketplace/it ... 702759386/
2 clear plastic music stands for desktop workstation use. They can slide on the edge of some workstations (I think they're Wenger). Sheet music not included
Various electronic equipement, not sure what they both do, but somehow ended up with them
8. Alexis NanoCompressor $50 or best offer
https://www.facebook.com/marketplace/it ... 106793271/
Comes with adapter and manual.
9. Tascam RC-88 Remote control $50 or best offer
https://www.facebook.com/marketplace/it ... 810482791/
I think this is for Analog video editing
Email me with any questions. weskrygsmanATgmailDOTcom
Also willing to video chat someone to show more details about any of these.