drum roll...JP-RATH 2-rotor bass trombone model 333 Bookmark and Share

TubeNet Sponsors make TubeNet possible!

drum roll...JP-RATH 2-rotor bass trombone model 333

Postby bloke » Tue Sep 12, 2017 1:35 pm

Tomorrow, a few more of the new JP333-RATH two-rotor bass trombones arrive at blokeplace.
This time, I'll take pictures 'n' stuff...but (sorry) no mesmerizing/fascinating "unpacking" video.

This instrument: yet another JP no-nonsense truly professional quality instrument out of China, YET priced at something a serious doubler (who needs something that isn't clicky-sticky, and that resonates as it should) can afford.

These will be the first of only the second dozen of these on the planet.

Here's Michael Rath, back when he was inspecting the prototype:

Image
User avatar
bloke
musician/technician/innovator
musician/technician/innovator
 
Posts: 37913
Joined: Sat May 08, 2004 6:04 pm
Location: western Tennessee

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby bloke » Tue Sep 12, 2017 8:54 pm

Just fwiw...
JP - for years - has offered a lower-priced two-rotor bass trombone ("good for students and, perhaps not-quite-as-serious doublers") for a price roughly (to clarify: ~not~ made by Jb) in the Jb price range. That instrument is the model 232, and a hi-res picture of that much-lower-priced (i.e. ~not~ RATH series) double-rotor bass can be viewed here:
:arrow: http://www.jpmusicalinstruments.com/images/magictoolbox_cache/52ea7ce97bd6291c00f12faba15ddd67/1/7/17651/original/3056269553/JP232-Trombone-INSTRUMENT-SHOT.jpg

The "333 RATH" model, though, is a really serious bass trombone. :|
If you LIKE Rath bass trombones, but aren't excited about stuff such as custom gauge, custom allow, custom mouthpipe, custom valves, etc., and are (simply) seeking "a great pro-quality production bass trombone for less than half the price of the other top-grade production models",
The JP-RATH is ~really~ a nice instrument.
One of my section mates uses the single-rotor version.
He's not exactly an "anything will do" type of player; his tenor is an Edwards Alessi model.
Last edited by bloke on Tue Sep 12, 2017 9:06 pm, edited 2 times in total.
User avatar
bloke
musician/technician/innovator
musician/technician/innovator
 
Posts: 37913
Joined: Sat May 08, 2004 6:04 pm
Location: western Tennessee

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby Mark Finley » Tue Sep 12, 2017 8:58 pm

I played the single trigger version last year at TMEA, and if I can find a buyer for my yamaha, I"m selling that and getting the 333. The single was fabulous, so I'm sure this one will be as well
Formerly 58Mark
User avatar
Mark Finley
Low Brass Teacher
Low Brass Teacher
 
Posts: 4385
Joined: Fri Mar 19, 2004 12:08 am
Location: Mesquite, TX

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby bloke » Tue Sep 12, 2017 11:31 pm

yeah...
It's kind of interesting:
In two of the orchestras in which I play, the bass trombonists use Rath-designed instruments.
John Rojak uses a Rath (dependent 2-rotor model) made in the UK, and Ed Morse uses a JP Rath (single rotor) model.
I don't know if they would consider themselves to be "artistes" but, fwiw...
http://www.jdrojak.com/
https://www.mvsu.edu/Dr-Edward-Morse

Ed (just now) put this on youtube for me. It's from last week's first rehearsal. Obviously, I recorded it with my phone.

https://www.youtube.com/watch?v=FwxRVR1Xxe8

funny: I'm playing New World again next month with John. :roll:

bloke "I wish I could be as nice as either one of those guys..."
User avatar
bloke
musician/technician/innovator
musician/technician/innovator
 
Posts: 37913
Joined: Sat May 08, 2004 6:04 pm
Location: western Tennessee

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby Casca Grossa » Wed Sep 13, 2017 8:55 am

JP needs to get Max Bonecutter as an artiste. The Bonecutter Rath Bass Trombone....I would buy it just for the name alone.
Casca Grossa
4 valves
4 valves
 
Posts: 553
Joined: Sun May 22, 2011 8:36 am
Location: Reading, PA

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby bloke » Wed Sep 13, 2017 8:58 am

Casca Grossa wrote:JP needs to get Max Bonecutter as an artiste. The Bonecutter Rath Bass Trombone....I would buy it just for the name alone.


I dunno... He might even be a two-e's "artistee". :shock:
User avatar
bloke
musician/technician/innovator
musician/technician/innovator
 
Posts: 37913
Joined: Sat May 08, 2004 6:04 pm
Location: western Tennessee

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby Casca Grossa » Wed Sep 13, 2017 9:08 am

bloke wrote:
Casca Grossa wrote:JP needs to get Max Bonecutter as an artiste. The Bonecutter Rath Bass Trombone....I would buy it just for the name alone.


I dunno... He might even be a two-e's "artistee". :shock:


Probably with an umlaut over at least one vowel too.
Casca Grossa
4 valves
4 valves
 
Posts: 553
Joined: Sun May 22, 2011 8:36 am
Location: Reading, PA

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby bloke » Wed Sep 13, 2017 10:46 am

...so here's a hi-res pic.
I don't think this is very easy to find on the web (yet).

Image
User avatar
bloke
musician/technician/innovator
musician/technician/innovator
 
Posts: 37913
Joined: Sat May 08, 2004 6:04 pm
Location: western Tennessee

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby Mark Finley » Wed Sep 13, 2017 11:01 am

Interesting. I can't ever remember seeing a open wrap trombone, especially a bass trombone, with a counterweight
Formerly 58Mark
User avatar
Mark Finley
Low Brass Teacher
Low Brass Teacher
 
Posts: 4385
Joined: Fri Mar 19, 2004 12:08 am
Location: Mesquite, TX

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby bloke » Wed Sep 13, 2017 12:17 pm

LOL...
I believe it's removable.
User avatar
bloke
musician/technician/innovator
musician/technician/innovator
 
Posts: 37913
Joined: Sat May 08, 2004 6:04 pm
Location: western Tennessee

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby Mark » Wed Sep 13, 2017 2:58 pm

Did I miss the price?
User avatar
Mark
6 valves
6 valves
 
Posts: 2826
Joined: Fri Mar 19, 2004 7:21 pm
Location: Sammamish, Washington

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby bloke » Wed Sep 13, 2017 3:09 pm

There are M.A.P. (Minimum Advertised Prices).
Out of respect for dealer agreements, I do not publicly advertise my prices of JP products.
User avatar
bloke
musician/technician/innovator
musician/technician/innovator
 
Posts: 37913
Joined: Sat May 08, 2004 6:04 pm
Location: western Tennessee

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby bloke » Wed Sep 13, 2017 4:20 pm

They just arrived. The first one is certainly behaving well with the tuner...
Even though I certainly am not seeking any sort of bass trombone-playing license, the tuning across the partials only varies (without lipping or slide-favoring) a very few cents. (Were it that the open partials on my most in-tune tuba - or my Willson 2900 euphonium - were this good, I'd be in heaven.) The valves and linkage (per all the JP rotary tubas I've sold) are as one would hope to find with any top-grade European-made instruments. The included mouthpiece seems to be some sort of (no stamping) 1-1/2G Megatone knock-off...whatever...
playing slide - great
tuning slides - close tolerances and superb alignment. The main slide can be operated with just one finger of one hand (no "coaxing" required at all).
...and yep, it appears to be (as are most of the top-line JP brass instruments) made of 80:20 alloy brass and nickel silver.
With the bulky Megatone-like mouthpiece inserted and the two-screws counterweight removed, it weighs in at c. 6 lbs.
oh and this: It sure is purdy ! :)
(I cannot easily take a picture, right now. (My iPhone is screwed up, and Mrs. bloke has it with her to exchange it for another at the store) ...but it looks just like the web-pic, except you might not be able to see the pretty engraving (groupings of concentric two-sized capital R's) on the rotor caps on that picture...
...so with what appears to be 80:20 alloy brass outside slide tubes and a nickel silver playing slide crook, I would rate the chance of any future playing slide red-rot at approximately 0%.
User avatar
bloke
musician/technician/innovator
musician/technician/innovator
 
Posts: 37913
Joined: Sat May 08, 2004 6:04 pm
Location: western Tennessee

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby Bob Kolada » Wed Sep 13, 2017 7:10 pm

Single or dual bore slide?
Bob Kolada
6 valves
6 valves
 
Posts: 2560
Joined: Sun Jul 19, 2009 1:57 pm
Location: Chicago

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby bloke » Wed Sep 13, 2017 9:06 pm

Bob Kolada wrote:Single or dual bore slide?


9/16" bore
User avatar
bloke
musician/technician/innovator
musician/technician/innovator
 
Posts: 37913
Joined: Sat May 08, 2004 6:04 pm
Location: western Tennessee

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby sweaty » Thu Sep 14, 2017 7:17 am

Is the leadpipe removable?

In the photo, the outer hand slide looks like it is nickel silver, same as the crook. Is that so?
sweaty
bugler
bugler
 
Posts: 52
Joined: Tue Mar 05, 2013 12:49 pm

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby bloke » Thu Sep 14, 2017 7:47 pm

It's a production (not custom) instrument, such as a $4000 - $5000 Bach or Yamaha production model...but for thousands less, so the venturi/mouthpipe tube is fixed. The mouthpipe tube is nickel silver so (unlike brass ones, when they get old) it shouldn't ever rot.

The outside slide tubes are made of the same type of brass (appears to be 80:20) as the rest of the instrument, and the playing slide crook is nickel silver.
User avatar
bloke
musician/technician/innovator
musician/technician/innovator
 
Posts: 37913
Joined: Sat May 08, 2004 6:04 pm
Location: western Tennessee

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby bloke » Fri Sep 15, 2017 4:29 pm

This bell section is so dang purdy, that I just had to take some (albeit hastily taken) pictures of it.

Also featured is Mz. blokecat (Nikki, age 13...c. 68 in human years).

Image
Image
Image
Image
Image
User avatar
bloke
musician/technician/innovator
musician/technician/innovator
 
Posts: 37913
Joined: Sat May 08, 2004 6:04 pm
Location: western Tennessee

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby Bob Kolada » Fri Sep 15, 2017 10:34 pm

bloke wrote:
Bob Kolada wrote:Single or dual bore slide?


9/16" bore



I think a dual bore slide would be a nice option.
Bob Kolada
6 valves
6 valves
 
Posts: 2560
Joined: Sun Jul 19, 2009 1:57 pm
Location: Chicago

Re: drum roll...JP-RATH 2-rotor bass trombone model 333

Postby bloke » Fri Sep 15, 2017 11:53 pm

Bob Kolada wrote:
bloke wrote:
Bob Kolada wrote:Single or dual bore slide?


9/16" bore



I think a dual bore slide would be a nice option.


I certainly could be, were their options.
That having been said, the "blown out" instrument designs thing has been fading from vogue for a few years (in brass, woodwinds, and strings).
...but this isn't an "option" instrument...
It's a "production" instrument...with a model number...like a Bach or Yamaha with a model number and non-optional stuff.

Michael Rath's UK-located factory offers options.
Those trombones cost more, as do options.
Actually, I think the UK-Rath factory offers a remarkably similar no-options bass trombone called the R-900...for $1XXX more than this JP333-RATH instrument.
:idea:
User avatar
bloke
musician/technician/innovator
musician/technician/innovator
 
Posts: 37913
Joined: Sat May 08, 2004 6:04 pm
Location: western Tennessee


Return to TubeNet Sponsors

Who is online

Users browsing this forum: No registered users and 6 guests