Exciting news

TubeNet Sponsors make TubeNet possible!
Post Reply
Ivan Giddings
pro musician
pro musician
Posts: 90
Joined: Mon Apr 05, 2004 6:21 pm

Exciting news

Post by Ivan Giddings »

Hi Everybody!!!

We have some great news that we wanted to share with our fellow low brass (and stainless) players out there.

Christmas came early for Bob and I. Check out the cool new delivery that the Lathe santa brought to us in late August of this year http://ww.gwmouthpieces.com/photos.html


We have been busy with mouthpieces, and decided to set up right in Bob's shop.

Photo #1 If you ever wondered how big of a truck it takes to deliver 8,500 pounds of equipment, now you know.

Photo #2 Off-loading the lathe, and a nice photo of Bob's cedar trees out by his shop

Photo #3 Taking off the pallet that the lathe sat on, and surveying the little tiny slope into the Shop. At this point there are no photos of us going down the little slope because Bob and I had act as counter weights on the back of the fork lift, otherwise the forklift was popping backwards wheelies as it started on it's way down the slope

Photo #4 Our shop with the lathe set up, the computer set up, and things in a mess as we get busy making mouthpieces

Photo#5 Our shop in a mess, but if you look close you will see our bar stock holder, Drill press, gas welder, and bar stock cutter.

Hope you all enjoy this
Post Reply