You are talking of like Meinl-Weston who offer some tubas in production, or handmade versions. That is something I need to discuss with factory...so can't say at this timekmorgancraw wrote:Any chance this horn, or others in the line up may eventually be available in a premium, handmade form like other tubas that are either "production" or "handmade?"
New Wessex 'Grand' 6/4 BBb tuba
- Wyvern
- Wessex Tubas
- Posts: 5033
- Joined: Fri Sep 01, 2006 7:00 pm
- Location: Hampshire, England when not travelling around the world on Wessex business
- Contact:
Re: New Wessex 'Grand' 6/4 BBb tuba
- The Big Ben
- 6 valves
- Posts: 3169
- Joined: Sat Dec 16, 2006 11:54 am
- Location: Port Townsend, WA
Re: New Wessex 'Grand' 6/4 BBb tuba
It's been explained to me that the surface to be satin finished is bead blasted and then plated. It could be done at the factory if the factory had the facilities. I would think that if a buyer wanted satin finish and it could not be provided by the factory, getting a horn in raw brass then having it bead blasted and plated would be the way to go. Bead blasting would ruin the original polished silver finish and, to do the plating, a lacquer finish would need to be removed. The bead blasting would remove some of the lacquer but, in bead blasting, areas where a polished silver finish is desired (like the bow guards), the lacquer would need to be removed and masked off before bead blasting. Easier to get it in raw brass.Wyvern wrote:I am sure one of the techs can explain the process, but remember something about base coat of copper plating58mark wrote:I don't know of the procedure for satin, but if it's what I think it is, wouldn't it make more sense to get a silver tuba and have it blasted?
Or just accept a factory finish. Labor and plating ain't cheap.
- Wyvern
- Wessex Tubas
- Posts: 5033
- Joined: Fri Sep 01, 2006 7:00 pm
- Location: Hampshire, England when not travelling around the world on Wessex business
- Contact:
Re: New Wessex 'Grand' 6/4 BBb tuba
Not until the design is finalised and signed off later this year.Doc wrote:When do we get to hear sound samples?
Although I always wonder the worth of such sound samples, as they as much demonstrate the tone/virtuosity of the musician playing and the acoustics of the room, as they do the tuba being demonstrated. A back to back comparison against another known horn in same venue, played by same musician might provide a better demonstration of the new tuba
- bort
- 6 valves
- Posts: 11223
- Joined: Wed Sep 22, 2004 11:08 pm
- Location: Minneapolis, Minnesota
Re: New Wessex 'Grand' 6/4 BBb tuba
For me, it's as much about proof of playability as it is the sound itself. Yeah, it's big and shiny... But does it work, work easily, need slide pulling... You can tell a lot watching a video of someone playing the tuba.
- Ken Crawford
- 4 valves
- Posts: 722
- Joined: Sat Jun 23, 2012 10:45 am
- Location: Rexburg, ID
Re: New Wessex 'Grand' 6/4 BBb tuba
Demo videos are fun but don't really demonstrate much of anything in terms of what you'll get out of the horn in question.
- LCTuba89
- bugler
- Posts: 136
- Joined: Wed Nov 10, 2010 5:30 pm
Re: New Wessex 'Grand' 6/4 BBb tuba
I've noticed that as well. It seems like the CC variant wraps the tubing more tightly than the BBb version. Which would also effectively lower the leadpipe making it easier to play without a stand. Obviously one could have the leadpipe lowered on the BBb version but then there's still the issue of the tuning slides being too far up. The CC's slides are positioned perfectly for going under the top bow and pulling. The BBb's slides are positioned much like the BMB J-764/765 which forces you to go over the top of the horn to get the slides.GC wrote:Getting the weight toward the player is great, especially considering how many big horns seem to simply pile tubing way out front. One thing I've noticed in comparing the pictures of the big CC and BBb horns, though, is that the weight seems much lower down on the CC. The tubing and bows on the BBb seem much higher up with a definite gap lower down.
My only real complaint with my BMB BAT is the valve section position, but then that might affect the way the horn responds so I'd rather not screw with it. I can live with using a stand as my legs get worn out pretty quick by the weight of the horn.
-
- 4 valves
- Posts: 753
- Joined: Thu Apr 01, 2004 11:34 am
- Location: New England
Re: New Wessex 'Grand' 6/4 BBb tuba
I have read here that the the Wessex grand BBb and the big CC are different and different brass thicknesses. Are they using the same size ferrules? Could someone theoretically choose a lighter and a heavier bell for their horn, or buy both?
- Ken Crawford
- 4 valves
- Posts: 722
- Joined: Sat Jun 23, 2012 10:45 am
- Location: Rexburg, ID
Re: New Wessex 'Grand' 6/4 BBb tuba
The BBb has larger bows according to Chuck Nickles, may not be able to interchange bells.Tabor wrote:I have read here that the the Wessex grand BBb and the big CC are different and different brass thicknesses. Are they using the same size ferrules? Could someone theoretically choose a lighter and a heavier bell for their horn, or buy both?
-
- bugler
- Posts: 57
- Joined: Mon Jan 23, 2017 2:02 pm
- Location: North Carolina, USA
Re: New Wessex 'Grand' 6/4 BBb tuba
Beautiful horn. What's the estimate for availability on the BBb and CC 6/4 tubas?
- Wyvern
- Wessex Tubas
- Posts: 5033
- Joined: Fri Sep 01, 2006 7:00 pm
- Location: Hampshire, England when not travelling around the world on Wessex business
- Contact:
Re: New Wessex 'Grand' 6/4 BBb tuba
The first batch of both are expected March 2018. They will be on website and we will start taking pre-orders from late October.WagnerRing wrote:Beautiful horn. What's the estimate for availability on the BBb and CC 6/4 tubas?