Wessex Tubas in China- Exciting developments!

TubeNet Sponsors make TubeNet possible!
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Wessex Tubas in China- Exciting developments!

Post by Wyvern »

Wessex Tubas are this next two weeks at our factory in China, quality assuring and developing new instruments. Here is a sight to please tuba players - 4 of our new 6/4 CC tuba being checked before finishing.

Image

The one being played by Chuck Nickles is a special version of the tuba, with 18" bell, the "Chicago-Presence", which we actually prefer to the regular 20" bell "Chicago-York". It gives the tuba a more focused tone and an immediate response more like you would expect of a 5/4, while still having the power of a 6/4.

Image

There are lots of other exciting developments, so look out for further posts. I will try to post daily during our visit.
User avatar
Ken Crawford
4 valves
4 valves
Posts: 722
Joined: Sat Jun 23, 2012 10:45 am
Location: Rexburg, ID

Re: Wessex Tubas in China- Exciting developments!

Post by Ken Crawford »

Will you have both examples at the Army Tuba Euphonium workshop in 2018?
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Wessex Tubas in China- Exciting developments!

Post by Wyvern »

Definitely both at Army conference, and a lot more too
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Wessex Tubas in China- Exciting developments!

Post by Wyvern »

Here is first view of Wessex new 4/4 BBb tuba, the "Dragon" - which will be available in both 4-valve and 5-valve versions. This is a completely new Wessex design and not a clone of anything. Bell is 19" and bore starts at 0.75". Both versions will be exhibited at US Army workshop and TMEA next February - and be available from March 2018.

This model replaces our previous TB580 Michigan model being of similar size.

4-valve version
Image

5-valve version
Image
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Wessex Tubas in China- Exciting developments!

Post by Wyvern »

Here is taster of another new model just developed today and will be available 2018. New design F contrabass trombone with regular rotary valves which will be flexible to play in D or C and Db or Bb

Image
LowBrassNYC
bugler
bugler
Posts: 86
Joined: Sun Mar 24, 2013 10:35 pm

Re: Wessex Tubas in China- Exciting developments!

Post by LowBrassNYC »

Is that going to be a tuning-in-slide contra in F?
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Wessex Tubas in China- Exciting developments!

Post by Wyvern »

LowBrassNYC wrote:Is that going to be a tuning-in-slide contra in F?
No there is slide in the bell
LowBrassNYC
bugler
bugler
Posts: 86
Joined: Sun Mar 24, 2013 10:35 pm

Re: Wessex Tubas in China- Exciting developments!

Post by LowBrassNYC »

Looks great! Any chance of doing a cut-bell?
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Wessex Tubas in China- Exciting developments!

Post by Wyvern »

LowBrassNYC wrote:Looks great! Any chance of doing a cut-bell?
Are you talking about a removable bell?
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Wessex Tubas in China- Exciting developments!

Post by Wyvern »

hrender wrote:The proportions of "the dragon" are very nice. It will be interesting to hear how it sounds & plays.
Wessex will be exhibiting widely in 2018, starting with US Army workshop and TMEA
MikeMason
6 valves
6 valves
Posts: 2102
Joined: Fri Mar 19, 2004 1:03 am
Location: montgomery/gulf shores, Alabama
Contact:

Re: Wessex Tubas in China- Exciting developments!

Post by MikeMason »

We need a piston f!
LowBrassNYC
bugler
bugler
Posts: 86
Joined: Sun Mar 24, 2013 10:35 pm

Re: Wessex Tubas in China- Exciting developments!

Post by LowBrassNYC »

Wyvern wrote:
LowBrassNYC wrote:Looks great! Any chance of doing a cut-bell?
Are you talking about a removable bell?
Yes, like what's common on horns and is trending with tenor and bass trombones. Could make for a lower profile case and easier to transport.
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Wessex Tubas in China- Exciting developments!

Post by Wyvern »

MikeMason wrote:We need a piston f!
Not just one, but two very different piston F are in development. Both we hope to have prototypes to exhibit at US Army workshop.
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Wessex Tubas in China- Exciting developments!

Post by Wyvern »

KiltieTuba wrote:What are you expecting a possible price for the standard rotor F contrabass trombone?
It has to cost a bit more than the previous model to cover development costs, but I want to keep under $3,000
User avatar
Teditiks
lurker
lurker
Posts: 11
Joined: Thu Nov 14, 2013 10:22 am
Location: Sweden

Re: Wessex Tubas in China- Exciting developments!

Post by Teditiks »

Anything new on the Eb-front Jonathan? I'd like to see a 5/4 or 6/4 if possible, and possibly a rotor Gnagey too.... :)
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Wessex Tubas in China- Exciting developments!

Post by Wyvern »

Teditiks wrote:Anything new on the Eb-front Jonathan? I'd like to see a 5/4 or 6/4 if possible, and possibly a rotor Gnagey too.... :)
We have got some plans for future development on the Eb front too, but I won't say more now :)
User avatar
GC
5 valves
5 valves
Posts: 1800
Joined: Fri Mar 19, 2004 5:52 am
Location: Rome, GA (between Rosedale and Armuchee)

Re: Wessex Tubas in China- Exciting developments!

Post by GC »

What happened to all the pictures of the Dragon?
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Wessex Tubas in China- Exciting developments!

Post by Wyvern »

GC wrote:What happened to all the pictures of the Dragon?
The photos will be up on the website very shortly
User avatar
Steve Marcus
pro musician
pro musician
Posts: 1842
Joined: Fri Mar 19, 2004 12:18 am
Location: Chicago area
Contact:

Re: Wessex Tubas in China- Exciting developments!

Post by Steve Marcus »

pauvog1 wrote:Is Wessex an Eastman dealer?
Wessex and Eastman are two different manufacturers.

Wessex specializes in brass instruments and accessories.
Steve Marcus
http://www.facebook.com/steve.marcus.88
Phi Mu Alpha Sinfonia
User avatar
Teditiks
lurker
lurker
Posts: 11
Joined: Thu Nov 14, 2013 10:22 am
Location: Sweden

Re: Wessex Tubas in China- Exciting developments!

Post by Teditiks »

Wyvern wrote:
Teditiks wrote:Anything new on the Eb-front Jonathan? I'd like to see a 5/4 or 6/4 if possible, and possibly a rotor Gnagey too.... :)
We have got some plans for future development on the Eb front too, but I won't say more now :)
I've got an idea for you, not that I doubt that you have several already... :) How about a 3+1 rotary, akin the ones Hirsbrunner made? Don't know if any other manufacturer went that road... Not to copy, more like the idea of setup... Like the F-tubas have their setup. Haven't seen one being played, but I for one like the idea of a 3+1 without the requirement of reaching all the way around the instrument.
Post Reply