New Wessex handmade 6/4 BBb, TB693

TubeNet Sponsors make TubeNet possible!
Post Reply
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

New Wessex handmade 6/4 BBb, TB693

Post by Wyvern »

Chris Olka alluded in his YouTube video https://youtu.be/aUcoKW6O71Q to the possibility of Wessex Tubas bringing out a new fully hand-hammered version of our 6/4 BBb - this is the TB693 Grand-Symphonic of which we have just put together the prototype (or rather mocked up, as prototype does not have all hand-hammered bows). This uses the same hand-hammered bell as the TC695 Chicago-York, the same valve set (lengthened to BBb) and same leadpipe. So in ergonomics, it will be very familiar to any professional orchestral tubist playing a York style 6/4 CC, while giving that special tone that only a 6/4 BBb can deliver. Being hand-hammered it will be much lighter than the TB692 Grand (my guess is 24lb) and will have the immediate response of a fully handmade tuba.

We need to experiment to decide the optimal bell size. The prototype has 20", but we may well reduce in size to increase presence in an orchestral situation to nearer that of a German Kaiser.

Pricing will be the same as the TC695 at just $9,750. The TB692 Grand will then continue in the Wessex range, but in a 4-valve version at price of just $4,950 (lacquered), $5,500 (silver) for concert band use. Two great 6/4 BBb's specifically designed for different uses.

We expect to have this tuba on the Wessex booth at NABBA, ITEC North West, Cleveland Tuba Day and ITEC South East during April and May and will be pleased to receive feedback.

Image

Image
Chris Olka
pro musician
pro musician
Posts: 399
Joined: Sun Jun 13, 2004 11:08 pm
Location: Cincinnati, Ohio

Re: New Wessex handmade 6/4 BBb, TB693

Post by Chris Olka »

Wow, congratulations on an apparently extremely productive trip to the factory!
Chris Olka
Cincinnati Symphony
User avatar
Steve Marcus
pro musician
pro musician
Posts: 1842
Joined: Fri Mar 19, 2004 12:18 am
Location: Chicago area
Contact:

Re: New Wessex handmade 6/4 BBb, TB693

Post by Steve Marcus »

Chris Olka wrote:Wow, congratulations on an apparently extremely productive trip to the factory!
Wow indeed.

Will the TB693 be available in a lacquer finish, even if there is no consumer cost savings compared to the silver finish? Or is it easier to produce a silverplated finish over hand-hammered horns? (Obviously the YamaYork and Nirschl-York are seen only in silver.)
We need to experiment to decide the optimal bell size. The prototype has 20", but we may well reduce in size to increase presence in an orchestral situation to nearer that of a German Kaiser.
Does that mean that the TB693 could end up taller than the TB692, albeit with a more narrow bell?
Steve Marcus
http://www.facebook.com/steve.marcus.88
Phi Mu Alpha Sinfonia
User avatar
bort
6 valves
6 valves
Posts: 11222
Joined: Wed Sep 22, 2004 11:08 pm
Location: Minneapolis, Minnesota

Re: New Wessex handmade 6/4 BBb, TB693

Post by bort »

Finally, a new Wessex tuba! :P
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: New Wessex handmade 6/4 BBb, TB693

Post by Wyvern »

Steve Marcus wrote: Will the TB693 be available in a lacquer finish, even if there is no consumer cost savings compared to the silver finish? Or is it easier to produce a silverplated finish over hand-hammered horns? (Obviously the YamaYork and Nirschl-York are seen only in silver.)
We need to experiment to decide the optimal bell size. The prototype has 20", but we may well reduce in size to increase presence in an orchestral situation to nearer that of a German Kaiser.
Does that mean that the TB693 could end up taller than the TB692, albeit with a more narrow bell?
All the Wessex handmade tubas will be available either triple silver plated (20+ microns) or raw brass to special order. There is a reason why hand-made tubas of most brands are silver-plated only.

No the bell won't be higher. In fact it is almost 1 inch shorter than the TB692. If smaller diameter bell rises pitch slightly, we will lengthen main tuning slide
User avatar
bort
6 valves
6 valves
Posts: 11222
Joined: Wed Sep 22, 2004 11:08 pm
Location: Minneapolis, Minnesota

Re: New Wessex handmade 6/4 BBb, TB693

Post by bort »

What is that reason?
User avatar
Sousaswag
3 valves
3 valves
Posts: 317
Joined: Sat Oct 14, 2017 6:12 pm

Re: New Wessex handmade 6/4 BBb, TB693

Post by Sousaswag »

Send it to Mr. Olka!
User avatar
Peach
4 valves
4 valves
Posts: 701
Joined: Thu Mar 17, 2005 8:42 am
Location: London, UK

Re: New Wessex handmade 6/4 BBb, TB693

Post by Peach »

I'd say leave the bell 20" if it works - those buying this type of tuba seem to want the fat sound with the blend of overtones a 20" bell seems to offer.
Those wanting a true Kaiser will be able to buy one from you pretty soon, no? =)
User avatar
AndyCat
3 valves
3 valves
Posts: 484
Joined: Fri Mar 19, 2004 4:11 am
Location: Preston, UK
Contact:

Re: New Wessex handmade 6/4 BBb, TB693

Post by AndyCat »

Looking forward to having a toot on one (but not the handmade I don't think) tomorrow!
Mark

Re: New Wessex handmade 6/4 BBb, TB693

Post by Mark »

Peach wrote:I'd say leave the bell 20" if it works - those buying this type of tuba seem to want the fat sound with the blend of overtones a 20" bell seems to offer.
Those wanting a true Kaiser will be able to buy one from you pretty soon, no? =)
+1
UDELBR
Deletedaccounts
Deletedaccounts
Posts: 1567
Joined: Fri Mar 19, 2004 1:07 am

Re: New Wessex handmade 6/4 BBb, TB693

Post by UDELBR »

I've tried to talk Jonathan into even larger diameter bells, like the grand old American 'pancake' bells: 22 or 23 inches as an option. I've always felt they produce a unique sound, and this ain't ever gonna be anyone's quintet horn. :lol:
doublebuzzing
3 valves
3 valves
Posts: 361
Joined: Thu Dec 24, 2009 7:03 pm

Re: New Wessex handmade 6/4 BBb, TB693

Post by doublebuzzing »

What is the height of this tuba compared to the CC version? It looks shorter as the bell doesn't stick as far up from the upper bow.
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: New Wessex handmade 6/4 BBb, TB693

Post by Wyvern »

doublebuzzing wrote:What is the height of this tuba compared to the CC version? It looks shorter as the bell doesn't stick as far up from the upper bow.
Appearances are deceptive. The top bow is higher, rather than the bell shorter
Post Reply