I've been using the K&M Playing stand for a few years now and just bought one of the Baltimore Brass stands. The BBC stands are nicer, as others have posted.
Here is my question for fellow playing-stand users: How do you maneuver around the stand's feet when the conductor directs the orchestra or you individually to stand?
I have always struggled with this and had resigned myself to the struggle until I went to ITEC this summer and saw the stand Alan Baer was using. The fee of his stand filled and area of only 10 or 12 inches. I realize that stability is sacrificed with the smaller footprint; but I would like less clutter under foot.
Playing Stand Logistics
-
scottw
- 5 valves

- Posts: 1519
- Joined: Fri Mar 19, 2004 8:39 am
- Location: South Jersey
Re: Playing Stand Logistics
[quote="Mark"]I've been using the K&M Playing stand for a few years now and just bought one of the Baltimore Brass stands. The BBC stands are nicer, as others have posted.
Here is my question for fellow playing-stand users: How do you maneuver around the stand's feet when the conductor directs the orchestra or you individually to stand?
I tuck 2 of the 3 legs under the front of the chair, leaving only one straight ahead. This is never a problem standing.The adjustment screw is always left facing away from me so I can use it freely. The BB stand is a lot less sprawling than the K&M and so very easy to use.

Here is my question for fellow playing-stand users: How do you maneuver around the stand's feet when the conductor directs the orchestra or you individually to stand?
I tuck 2 of the 3 legs under the front of the chair, leaving only one straight ahead. This is never a problem standing.The adjustment screw is always left facing away from me so I can use it freely. The BB stand is a lot less sprawling than the K&M and so very easy to use.
Bearin' up!
-
tubeast
- 4 valves

- Posts: 819
- Joined: Thu Feb 17, 2005 3:59 pm
- Location: Buers, Austria
No problem at all:
I usually sit all the way on the front edge of my chair. The K&M stand (in case I use it at all) is in front of me, one leg pointing my direction, the stand being about one foot in front of the chair´s front edge.
During long rests and between pieces my horn will rest on its bottom bow or bell by my side.
When I´m supposed to stand up, I simply do so, the tip of the stand´s leg between my feet.
I usually sit all the way on the front edge of my chair. The K&M stand (in case I use it at all) is in front of me, one leg pointing my direction, the stand being about one foot in front of the chair´s front edge.
During long rests and between pieces my horn will rest on its bottom bow or bell by my side.
When I´m supposed to stand up, I simply do so, the tip of the stand´s leg between my feet.
Hans
Melton 46 S
1903 or earlier GLIER Helicon, customized Hermuth MP
2009 WILLSON 6400 RZ5, customized GEWA 52 + Wessex "Chief"
MW HoJo 2011 FA, Wessex "Chief"
Melton 46 S
1903 or earlier GLIER Helicon, customized Hermuth MP
2009 WILLSON 6400 RZ5, customized GEWA 52 + Wessex "Chief"
MW HoJo 2011 FA, Wessex "Chief"
-
tubatooter1940
- 6 valves

- Posts: 2530
- Joined: Mon Mar 22, 2004 11:09 pm
- Location: alabama gulf coast
I use a three-legged stand that grips the tuba and (with no headwind) can hold the horn on it's own. I sit behind the tuba and tuba stand on a four-legged drum throne. Standing only involves swinging my legs to the left and standing up-leaving the tuba and stand alone.
I still am dying to try hanging my horn from the ceiling so I can swing it. Alls I have to do is make sure nothing is within the range of collision.
I still am dying to try hanging my horn from the ceiling so I can swing it. Alls I have to do is make sure nothing is within the range of collision.