Fingering chart for CC

The bulk of the musical talk
Post Reply
Sean Kennedy
lurker
lurker
Posts: 13
Joined: Sun Jun 11, 2006 11:09 pm
Location: Albuquerque, NM/Santa Fe, NM

Fingering chart for CC

Post by Sean Kennedy »

I need a finigering chart, or a link to one, that shows a tuba with a 5th valve that goes a step and a half. E-mail me at tubamaster_1@yahoo.com.
User avatar
iiipopes
Utility Infielder
Utility Infielder
Posts: 8580
Joined: Tue Sep 06, 2005 1:10 am

Post by iiipopes »

Do you really mean the flat whole step? I don't believe 5th valves are made to a full step and a half, unless you have the slide pulled way, way out, as that is what 12 or 3 is usually for, of course. Some older thumb valves are the equivalence of 23, which is two whole steps, to fill in the gap between 3 and 4 to have a single valve do the Major 3rd interval down.

What is your tuba? That might shed more light. Also, in the tips section of this very forum are fingering charts for all four major pitches of tubas.
Jupiter JTU1110
"Real" Conn 36K
winston
pro musician
pro musician
Posts: 505
Joined: Sun May 30, 2004 10:26 pm
Location: Victoria, BC

Post by winston »

.
Last edited by winston on Wed Jan 05, 2011 11:41 am, edited 1 time in total.
Winston Hind
The Naden Band of the Royal Canadian Navy
User avatar
hbcrandy
4 valves
4 valves
Posts: 653
Joined: Wed Apr 21, 2004 10:28 pm
Location: Baltimore, Maryland USA
Contact:

Post by hbcrandy »

There are several flavors of fifth valves. The most common today is the flat whole step. There is also the half-step fifth valve. The older German rotary valved tubas such as Miraphone and Meinl Weston, originally were equipped with 1 1/2-step descending fifth valves.
Randy Harrison
Proprietor,
Harrison Brass
Baltimore, Maryland USA
http://www.harrisonbrass.com
Instructor of Applied Brass Performance
Maryland Conservatory of Music
Bel Air and Havre de Grace, Maryland USA
http://www.musicismagic.com
User avatar
Art Hovey
pro musician
pro musician
Posts: 1508
Joined: Sun May 02, 2004 12:28 am
Location: Connecticut

Post by Art Hovey »

As a starting point, see Example 2:
http://www.galvanizedjazz.com/tuba/5thvalve.html

A one-and-one-half step fifth valve is unusual; that would be a minor third, the same as a conventional third valve. Is that really what you have?
Sean Kennedy
lurker
lurker
Posts: 13
Joined: Sun Jun 11, 2006 11:09 pm
Location: Albuquerque, NM/Santa Fe, NM

Post by Sean Kennedy »

My teacher, (Richard White) helped me figure out a chart, it was pretty easy, and it is a Cervny thats only 4 years old.
User avatar
porkchopsisgood
pro musician
pro musician
Posts: 243
Joined: Fri Mar 19, 2004 1:55 am

Post by porkchopsisgood »

The "flat 1st" configuration is what we are used to seeing here in the States, but the "min 3rd" configuration is not at all unusual.

Use your ear....or check some German sites....

Enjoy!
Allen V. Carter
Eastman 836
MW 2145
MW 45SLZ
XO Bass Bone

User avatar
iiipopes
Utility Infielder
Utility Infielder
Posts: 8580
Joined: Tue Sep 06, 2005 1:10 am

Post by iiipopes »

porkchopsisgood wrote:The "flat 1st" configuration is what we are used to seeing here in the States, but the "min 3rd" configuration is not at all unusual.

Use your ear....or check some German sites....

Enjoy!
So, is this to go along with 3 being pulled to make 23 in tune, or with 3 as two full steps?
Jupiter JTU1110
"Real" Conn 36K
Post Reply