Trimming Bell Flair...
- Peach
- 4 valves

- Posts: 701
- Joined: Thu Mar 17, 2005 8:42 am
- Location: London, UK
Trimming Bell Flair...
Could anyone in the know detail the changes to a horn when the bell flair is trimmed (aside from it fitting in a smaller case...)?
The main example I can think of is with the large cut C's. Often the old Holtons/Yorks etc have c.22" bells which are cut down to 20" or thereabouts. What are the differences before/after?
Just wondering.
Cheers.
The main example I can think of is with the large cut C's. Often the old Holtons/Yorks etc have c.22" bells which are cut down to 20" or thereabouts. What are the differences before/after?
Just wondering.
Cheers.
Peach
- Alex C
- pro musician

- Posts: 2225
- Joined: Fri Mar 19, 2004 10:34 am
- Location: Cybertexas
No one can tell you in detail what will happen but generally you could expect a less diffused sound.
The terminology can be batted around but that basically it.
The main question is: who are ya gonna get to roll it back up after it's cut? yeow!
The terminology can be batted around but that basically it.
The main question is: who are ya gonna get to roll it back up after it's cut? yeow!
City Intonation Inspector - Dallas Texas
"Holding the Bordognian Fabric of the Universe together through better pitch, one note at a time."
Practicing results in increased atmospheric CO2 thus causing global warming.
"Holding the Bordognian Fabric of the Universe together through better pitch, one note at a time."
Practicing results in increased atmospheric CO2 thus causing global warming.
- imperialbari
- 6 valves

- Posts: 7461
- Joined: Fri Mar 19, 2004 3:47 am
- Donn
- 6 valves

- Posts: 5977
- Joined: Fri Aug 19, 2005 3:58 pm
- Location: Seattle, ☯
- Rick Denney
- Resident Genius
- Posts: 6650
- Joined: Mon Mar 22, 2004 1:18 am
- Contact:
Re: Trimming Bell Flair...
Bob Rusk seems to think the slightly smaller bell puts slightly more core in the sound. That's why he trims all the 22" York bells down to 20" in his conversions.Peach wrote:The main example I can think of is with the large cut C's. Often the old Holtons/Yorks etc have c.22" bells which are cut down to 20" or thereabouts. What are the differences before/after?
I think he's probably right, but I'm not sure the effect would be noticeable in any objective sense.
Rick "thinking a larger bell flare provides wider dispersion" Denney
-
tubatooter1940
- 6 valves

- Posts: 2530
- Joined: Mon Mar 22, 2004 11:09 pm
- Location: alabama gulf coast
-
Allen
- 3 valves

- Posts: 404
- Joined: Fri Mar 19, 2004 12:29 am
- Location: Boston MA area
I have two small Eb tubas, with bells that are 14.25" and 13.5", respectively. Both have good false tones -- at least as good as the notes immediately above the open false tone (which is Ab). I have also tried small tubas that had no false tones whatsoever.tubatooter1940 wrote:I fear that reducing bell flare may diminish false tones that, I understand, are better in tubas with larger bells.
I would buy a horn case to fit the larger bell.
I haven't a clue as to why.
Cheers,
Allen
- T. J. Ricer
- pro musician

- Posts: 446
- Joined: Sun Mar 06, 2005 12:17 pm
- Contact:
Here's a thought. . . get yourself to a store that stocks Conns. . . The 52, 54, and 56J are (I think) identical except for their 18, 19, and 20" bells, respectively. I wouldn't have believed it until I tried it, but these horns are all quite different in sound and response. I suppose it may have been some other inconsistancy in construction, but they definitely have different qualities.
--T. J.
--T. J.
Thomas J. Ricer, DMA
Royal Hawaiian Band - University of Hawaii at Manoa - Yamaha Performing Artist
http://www.TJRicer.com
"Life is what happens to you while you're busy making other plans." -John Lennon
Royal Hawaiian Band - University of Hawaii at Manoa - Yamaha Performing Artist
http://www.TJRicer.com
"Life is what happens to you while you're busy making other plans." -John Lennon