Cleaning my Lacquer Tuba?????

The bulk of the musical talk
pulseczar
3 valves
3 valves
Posts: 435
Joined: Tue Sep 27, 2005 2:03 am

Post by pulseczar »

Pledge
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Post by Wyvern »

I find this very good
Image
User avatar
Chuck(G)
6 valves
6 valves
Posts: 5679
Joined: Fri Mar 19, 2004 12:48 am
Location: Not out of the woods yet.
Contact:

Post by Chuck(G) »

Pledge/Endust if you don't mind a little waxy oil on the surface (can make it a bit slippery). Windex otherwise (just to get things clean).
smurphius
3 valves
3 valves
Posts: 362
Joined: Thu Mar 18, 2004 10:36 pm

Post by smurphius »

I vote Pledge too!!!
TubaRay
6 valves
6 valves
Posts: 4109
Joined: Mon Mar 22, 2004 4:24 pm
Location: San Antonio, Texas
Contact:

Cleaning my lacquer tuba

Post by TubaRay »

schlepporello wrote:Word on the street in Amarillo, Tx is for Pledge.
Wayne, do you mean to tell me that this word is out on the streets of Amarillo? I'm shocked! :shock:
Ray Grim
The TubaMeisters
San Antonio, Tx.
User avatar
Chuck(G)
6 valves
6 valves
Posts: 5679
Joined: Fri Mar 19, 2004 12:48 am
Location: Not out of the woods yet.
Contact:

Post by Chuck(G) »

The trouble with "Amarillo" is that it doesn't scan as well as "Laredo"...
As I walked out in the streets of Amarillo
As I walked out in Amarillo one day
I spied a poor cowboy wrapped up in his tuba
All wrapped up in his tuba and nowhere to play.

"I see by your mouthpiece that you are a hornist"
These words he did say as I proudly stepped by
"Come sit down beside me and hear my sad story
I'm all out of Al Cass and my valves are so dry.
TubaRay
6 valves
6 valves
Posts: 4109
Joined: Mon Mar 22, 2004 4:24 pm
Location: San Antonio, Texas
Contact:

Cleaning my Lacquer Tuba

Post by TubaRay »

Move over Longfellow. Move over Poe. A new star poet has arrived.
Ray Grim
The TubaMeisters
San Antonio, Tx.
User avatar
finnbogi
3 valves
3 valves
Posts: 375
Joined: Fri Mar 19, 2004 6:59 pm
Location: Iceland

Post by finnbogi »

Doc wrote:Lemon Pledge, soft cotton cloth.
For us non-Americans, is Pledge a dish soap or a window cleanser?
dwaskew
pro musician
pro musician
Posts: 429
Joined: Fri Mar 19, 2004 8:10 am
Location: Greensboro, NC
Contact:

Post by dwaskew »

http://www.pledge.com/

furniture polish/spray to assist with dusting
User avatar
Steve Marcus
pro musician
pro musician
Posts: 1843
Joined: Fri Mar 19, 2004 12:18 am
Location: Chicago area
Contact:

Re: Cleaning my Lacquer Tuba

Post by Steve Marcus »

TubaRay wrote:Move over Longfellow. Move over Poe. A new star poet has arrived.
...and another poet inspired by this song has come and gone. "The Streets of Miami" have come a long way from Allan Sherman to CSI...
Steve Marcus
http://www.facebook.com/steve.marcus.88
Phi Mu Alpha Sinfonia
User avatar
Eric B
3 valves
3 valves
Posts: 345
Joined: Fri Oct 13, 2006 1:58 pm
Location: Idabel, Oklahoma

Post by Eric B »

For you bass trombone doublers, lemon Pledge is also great on a slide. A word of caution, the lemon aroma is a bit strong in a small room.
Miraphone CC 186-4U
Weril 980S
Ibanez acoustic guitar

http://www.fbccenter.org" target="_blank" target="_blank
User avatar
ken k
6 valves
6 valves
Posts: 2372
Joined: Sun Mar 21, 2004 11:02 pm
Location: out standing in my field....

Post by ken k »

I have never used anything but my breath (no jokes) and a soft rag. Just huff your breath on the instrument to make it fog up and wipe it clean with a soft rag. Sort of like cleaning your glasses, if you wear them.

If you have a stubborn water mark or finger prints, spray some water on it in a light mist. No need for any chemicals on lacquer; all it is is paint.

I guess Pledge or Windex wouldn't hurt anything but I just do not think it is necessary.

ken k
B&H imperial E flat tuba
Mirafone 187 BBb
1919 Pan American BBb Helicon
1924 Buescher BBb tuba (Dr. Suessaphone)
2009 Mazda Miata
1996 Honda Pacific Coast PC800
User avatar
circusboy
4 valves
4 valves
Posts: 671
Joined: Wed Mar 08, 2006 6:15 pm
Location: City of Angels

Post by circusboy »

What should I use to clean my lacquer horn?

Image


Works on silver, too.
TubaRay
6 valves
6 valves
Posts: 4109
Joined: Mon Mar 22, 2004 4:24 pm
Location: San Antonio, Texas
Contact:

Post by TubaRay »

Works for me!!!
Ray Grim
The TubaMeisters
San Antonio, Tx.
TubaSteve
bugler
bugler
Posts: 156
Joined: Mon May 09, 2005 2:38 pm
Location: SE Wisconsin

Post by TubaSteve »

Pledge works great! (In the interest of disclosure, I am a chemical worker at S.C. Johnson Wax, and I actually make Lemon Pledge, so I do have an interest in it). That said, I also use "Jubilee Kitchen Wax" on my horns. We also make it, but it is much harder to find. It has a higher wax content, but both work great and will protect the finish as well as remove salt from fingerprints ect. If you do a lot of gigs that the temp is of the sweltering variety, you can leave a lot of salt water on your horn from sweating. I have used it on my Meinl Weston since 89 and the finish still looks like new.

Steve
MW-25, 2-Reynolds 170 (BBb Recording Bass), Reynolds 180 (EEb Recording Bass) , 2-Reynolds 140 Sousaphones, Holton 350, others.....
User avatar
Chuck(G)
6 valves
6 valves
Posts: 5679
Joined: Fri Mar 19, 2004 12:48 am
Location: Not out of the woods yet.
Contact:

Post by Chuck(G) »

In the interest of equal time, I suspect that the following fizzy cans are probably just fine too:

<img src="http://www.scottsliquidgold.com/files/p ... -lemon.jpg"> <img src="http://us.st11.yimg.com/us.st.yimg.com/ ... 186332.jpg">
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Post by Wyvern »

Taking this the other way - has anyone used anything on lacquer which has had a bad result which should be avoided?
pulseczar
3 valves
3 valves
Posts: 435
Joined: Tue Sep 27, 2005 2:03 am

Post by pulseczar »

Denatured alcohol is deadly on the old nitrocellulose lacquer.


How 'bout Meguiars? Has anybody tried that?
User avatar
Chuck(G)
6 valves
6 valves
Posts: 5679
Joined: Fri Mar 19, 2004 12:48 am
Location: Not out of the woods yet.
Contact:

Post by Chuck(G) »

Neptune wrote:Taking this the other way - has anyone used anything on lacquer which has had a bad result which should be avoided?
Methylene chloride. :shock:
TubaSteve
bugler
bugler
Posts: 156
Joined: Mon May 09, 2005 2:38 pm
Location: SE Wisconsin

Post by TubaSteve »

Chuck(G) wrote:In the interest of equal time, I suspect that the following fizzy cans are probably just fine too:

<img src="http://www.scottsliquidgold.com/files/p ... -lemon.jpg"> <img src="http://us.st11.yimg.com/us.st.yimg.com/ ... 186332.jpg">
Boo!!!Hissssss!!! That's the competition there. In reality, I had at one time suggested to marketing that they actually throw some promos of Pledge or Jubilee in music stores, trade mags, etc. I would go so far as to pass out a few cases to band directors to pass out to the brass players as there is a whole additional area of demand that is not fully utilized.

Steve
MW-25, 2-Reynolds 170 (BBb Recording Bass), Reynolds 180 (EEb Recording Bass) , 2-Reynolds 140 Sousaphones, Holton 350, others.....
Post Reply