Yo, Tread Mill users!

Be kind. No government, state, or local politics allowed. Admin has final decision for any/all removed posts.
Forum rules
Be kind. No government, state, or local politics allowed. Admin has final decision for any/all removed posts.
Post Reply
User avatar
bearphonium
5 valves
5 valves
Posts: 1077
Joined: Wed Jan 17, 2007 9:21 pm
Location: Making mischief in the back row at 44, 1' 49"N, 123, 8'10"W

Re: Yo, Tread Mill users!

Post by bearphonium »

We bought a Nordic Track Commercial model from Cost Co last year for about $750. I am a wide/oversized load model, so we needed the sturdy bed and belt and the better motor. The treadmill has stood up very well; getting it up two flights of stairs was a stone b1tch, however.

Ally
Mirafone 186 BBb
VMI 201 3/4 BBb
King Sousaphone
Conn 19I 4-valve non-comp Euph


What Would Xena Do?
User avatar
Uncle Buck
5 valves
5 valves
Posts: 1243
Joined: Fri Aug 27, 2004 3:45 pm
Location: Salt Lake City, Utah
Contact:

Re: Yo, Tread Mill users!

Post by Uncle Buck »

When we bought one about 7 years ago, the most expensive model carried at Wal-Mart was $400. The leap from that to the LEAST expensive model sold at sporting goods stores was so big, we decided to go with the $400 model.

It has worked very well for us. After a few years we had to replace the belt/track, about $100, when it started slipping. (Bought the new one off eBay. It was a bit of a hassle to replace.) After that repair, it was back to as good as new.
User avatar
Rick F
5 valves
5 valves
Posts: 1679
Joined: Thu Mar 18, 2004 11:47 pm
Location: Lake Worth, FL

Re: Yo, Tread Mill users!

Post by Rick F »

I purchased a ProForm Sport 1100 about 2 years ago. The one it replaced was a really old ProForm model with a narrow belt and a manual incline adjuster. This one does everything I want it to (except exercise for me) and cost around $700. I see it's even a bit cheaper today from Sports Authority where I got mine. It goes from 1 mph up to 10 mph with .1mph increments. Tilt incline adjust (separate motor) that goes from 0 up to 10° in .5° increments. Also has a 3-speed fan you can turn on to blow in your face to keep you cool. A pulse rate monitor if you grip the front handle area. Also has 8 different exercise programs, and one you can customize to your liking. I don't use these but do use the manual mode almost everyday for walking 2 miles/day.

ProForm Sport 1100 product review
Miraphone 5050 - Warburton BJ/RF mpc
YEP-641S (recently sold), DE mpc (102 rim; I-cup; I-9 shank)
Symphonic Band of the Palm Beaches:
"Always play with a good tone, never louder than lovely, never softer than supported." - author unknown.
rocksanddirt
4 valves
4 valves
Posts: 552
Joined: Sat Mar 01, 2008 10:14 pm

Re: Yo, Tread Mill users!

Post by rocksanddirt »

I know nothing about treadmills. I'm of the bloke school of excersise. make it part of your commute, then you have to do it. Currently I ride my bike to/from work (about 4 miles each way).
User avatar
Matt G
5 valves
5 valves
Posts: 1196
Joined: Fri Mar 19, 2004 9:24 am
Location: Quahog, RI

Re: Yo, Tread Mill users!

Post by Matt G »

Another alternate is to join a gym that is convenient to your travel to and from work. Honestly, I prefer the gym to all else when trying to get into shape. While I have a good bit of my own stuff, nothing beats (for me) the edge I get in the gym. I routinely lift more and workout harder because I am in the gym for a purpose.

Most gyms right now have some aggressive plans due to the economy. You should be under $500 a year for membership. Also, if you have (a) child(ren), you might want to look into the good old YMCA. I was a member primarily for my daughter's swim lessons. However, both my wife and I have also joined in some separate classes for ourselves. Again, being in a purpose built facility seems to do much more for me than the equipment at home.
Dillon/Walters CC
Meinl Weston 2165
User avatar
MartyNeilan
6 valves
6 valves
Posts: 4876
Joined: Fri Mar 19, 2004 3:06 am
Location: Practicing counting rests.

Re: Yo, Tread Mill users!

Post by MartyNeilan »

Matthew Gilchrest wrote:Another alternate is to join a gym that is convenient to your travel to and from work.
I had a different take on that when I was getting my B.M.E. The bulk of the time, I used my bike to get back and forth to school, and for local lessons. Going to school / work WAS my gym ;)

FWIW, I tried it once in Nashville, and about got run over 3 times. Haven't tried again.
User avatar
ken k
6 valves
6 valves
Posts: 2371
Joined: Sun Mar 21, 2004 11:02 pm
Location: out standing in my field....

Re: Yo, Tread Mill users!

Post by ken k »

We have an ancient treadmill but it still gets the job done, but I prefer my nordic Trak skier so I get an upper body work out as well.

Their regular use goes in and out of cycles so when not in use, they both make great clothes racks also....

ken k
B&H imperial E flat tuba
Mirafone 187 BBb
1919 Pan American BBb Helicon
1924 Buescher BBb tuba (Dr. Suessaphone)
2009 Mazda Miata
1996 Honda Pacific Coast PC800
Normal
bugler
bugler
Posts: 90
Joined: Fri Mar 19, 2004 1:59 am
Location: Salem, OR

Re: Yo, Tread Mill users!

Post by Normal »

I have a Healthrider that I bought from Costco about six years ago. It has been fine although not really made for running if you weigh over 250 lbs. I've had to replace some parts over time including the main electrical controller. The website I've found with the most truthful reviews can be found at http://www.treadmilldoctor.com/Treadmil ... -Treadmill.
Norm Miller

King 2341S BBb
Yamaha YBL 612 Bass Trombone

Willamette Valley Concert Band
User avatar
elimia
3 valves
3 valves
Posts: 359
Joined: Wed Apr 21, 2004 9:30 pm
Location: Hermitage, Tennessee

Re: Yo, Tread Mill users!

Post by elimia »

$400 ProForm model, bought about 4 years ago. The belt has slipped a bit over time but is easy to adjust. Buy something better than a ProForm. A buddy of mine bought a $1,000 Nordictrack from Sears, very very nice.
User avatar
runelk
pro musician
pro musician
Posts: 135
Joined: Fri Mar 19, 2004 7:35 pm
Location: Alexandria, VA
Contact:

Re: Yo, Tread Mill users!

Post by runelk »

PaceMaster brand. Bought mine Dec 2001 no problems or repairs since i got it. Use it fairly regularly. Have done a 16 mile run on it while watching one of the "lord of the rings" movies. Cost about $2500 back in 2001. Fitness Resource is where I bought it. Unless you've done extensive research, I'd go to a place like fitness resource where the employees know the products
The only thing for evil to triumph, is when good men do nothing...
Post Reply