At least he didn't say "humour". We'll let "learnt" slide however.Neptune wrote:Looks like we may both have learnt something - You an English phrase and me US humor!MartyNeilan wrote:I actually had to Google "Heath-Robinson" to find that it is the British version of Rube Goldberg.
Dents???
-
UDELBR
- Deletedaccounts

- Posts: 1567
- Joined: Fri Mar 19, 2004 1:07 am
Re: Dents???
- Rick Denney
- Resident Genius
- Posts: 6650
- Joined: Mon Mar 22, 2004 1:18 am
- Contact:
Re: Dents???
Which is equally fictitious.bloke wrote:bloke "who only blames cats for fart odors"
Rick "just sayin'..." Denney
- Dan Schultz
- TubaTinker

- Posts: 10427
- Joined: Thu Mar 18, 2004 10:46 pm
- Location: Newburgh, Indiana
- Contact:
Re: Dents???
Don't laugh! I've had horns in the shop that were 'fixed' that way. And then painted gold to top it off!MartyNeilan wrote:James,
Don't waste your time and money on so-called "instrument" repairmen. This is easily fixed by a local "street mechanic" who does bodywork. He will drill a small hole in the middle of the dent. Screw in a slide hammer, couple of pulls, and the dent is basically gone. Fill in the hole and level to slightly above the surface with Bondo, and then sand smooth. Works like a charm.
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
-
Kayla
- bugler

- Posts: 171
- Joined: Tue May 20, 2008 9:48 pm
-
tubashaman2
- 4 valves

- Posts: 713
- Joined: Tue Nov 25, 2008 12:03 am
Re: Dents???
.
Last edited by tubashaman2 on Sun Jan 31, 2010 11:20 am, edited 1 time in total.
Miraphone 1291CC
PT 10S (Made in East Germany, GDR)
YFB 621S
PT 10S (Made in East Germany, GDR)
YFB 621S
- Rick Denney
- Resident Genius
- Posts: 6650
- Joined: Mon Mar 22, 2004 1:18 am
- Contact:
Re: Dents???
The cat might have been a door?tubashaman2 wrote:I took it to the shop today, getting that dent and another smaller dent out today, he said it will be $30 or less. The cat is not mine, it might have been a door, but thats the part that is on my back so I do not see how a door would have caught it...
Rick "confused" Denney
- MartyNeilan
- 6 valves

- Posts: 4878
- Joined: Fri Mar 19, 2004 3:06 am
- Location: Practicing counting rests.
Re: Dents???
Not to be the spelling Nazi (that job is already takengoodgigs wrote:So just to make myself less stupid, I'm posting that the name I couldn't remember: Lee Stofer. Lee Stofer is tubamiester.com.
Unfortunately for you James, he is nowhere near Texas. Otherwise I'd say "He's the man" (for dent eraser work).
but it is spelled http://www.tubameister.com" target="_blank
(Google used to want to correct it to bubbameister, but Lee is no longer in Georgia.)
Lee is definitely a good guy to go to.
http://www.tubameister.com/
FWIW, what you are looking at is not major surgery, you should be able to find someone within a few hours drive that you trust to "erase" it.
I will have to remember the cat excuse.
-
tubashaman2
- 4 valves

- Posts: 713
- Joined: Tue Nov 25, 2008 12:03 am
Re: Dents???
.
Last edited by tubashaman2 on Sun Jan 31, 2010 11:20 am, edited 1 time in total.
Miraphone 1291CC
PT 10S (Made in East Germany, GDR)
YFB 621S
PT 10S (Made in East Germany, GDR)
YFB 621S
-
DavidK
- bugler

- Posts: 91
- Joined: Fri Jan 23, 2009 12:10 am
Re: Dents???
That dent doesn't even look cat-head shaped. I was originally thinking that maybe your cat was doing an archie and mehitable role reversal. (nod and thank you go to Don Marquis!)
That looks like it might be from an unnoticed encounter with a chair. Turning "the wrong way" while seated with your tuba could easily put that dent in the instrument. (bummer)
That looks like it might be from an unnoticed encounter with a chair. Turning "the wrong way" while seated with your tuba could easily put that dent in the instrument. (bummer)
-
tubashaman2
- 4 valves

- Posts: 713
- Joined: Tue Nov 25, 2008 12:03 am
Re: Dents???
.
Last edited by tubashaman2 on Sun Jan 31, 2010 11:20 am, edited 1 time in total.
Miraphone 1291CC
PT 10S (Made in East Germany, GDR)
YFB 621S
PT 10S (Made in East Germany, GDR)
YFB 621S
- bort
- 6 valves

- Posts: 11223
- Joined: Wed Sep 22, 2004 11:08 pm
- Location: Minneapolis, Minnesota
Re: Dents???
We are all careful, but at some point, dents are just going to happen. With or without a cat. 
Just get it fixed up, keep being careful, and keep a good repairman's phone number handy. You'll always need it.
Just get it fixed up, keep being careful, and keep a good repairman's phone number handy. You'll always need it.
- Waltski
- bugler

- Posts: 55
- Joined: Sun May 25, 2008 1:04 am
- Location: Portland, OR
Re: Dents???
Sorry, couldn't resist....
You do not have the required permissions to view the files attached to this post.
- Art Hovey
- pro musician

- Posts: 1508
- Joined: Sun May 02, 2004 12:28 am
- Location: Connecticut
Re: Dents???
So you got it fixed, and didn't have to pay a fortune. That's great.
Does it play any differently?
Did you notice any intonation issues or response changes that could be blamed on the dent or its removal?
Does it play any differently?
Did you notice any intonation issues or response changes that could be blamed on the dent or its removal?
-
tubashaman2
- 4 valves

- Posts: 713
- Joined: Tue Nov 25, 2008 12:03 am
Re: Dents???
.
Last edited by tubashaman2 on Sun Jan 31, 2010 11:20 am, edited 1 time in total.
Miraphone 1291CC
PT 10S (Made in East Germany, GDR)
YFB 621S
PT 10S (Made in East Germany, GDR)
YFB 621S
- Eric B
- 3 valves

- Posts: 345
- Joined: Fri Oct 13, 2006 1:58 pm
- Location: Idabel, Oklahoma
Re: Dents???
Oh ya, the cat thinks he's a doorRick Denney wrote:The cat might have been a door?tubashaman2 wrote:I took it to the shop today, getting that dent and another smaller dent out today, he said it will be $30 or less. The cat is not mine, it might have been a door, but thats the part that is on my back so I do not see how a door would have caught it...
Rick "confused" Denney

Or perhaps you should hire a bodyguard for your 1291

Miraphone CC 186-4U
Weril 980S
Ibanez acoustic guitar
http://www.fbccenter.org" target="_blank" target="_blank
Weril 980S
Ibanez acoustic guitar
http://www.fbccenter.org" target="_blank" target="_blank
-
eupher61
- 6 valves

- Posts: 2790
- Joined: Tue Oct 10, 2006 9:37 pm
- iiipopes
- Utility Infielder

- Posts: 8580
- Joined: Tue Sep 06, 2005 1:10 am
Re: Dents???
All the more reason why I won't get near the toxoplasmosis-infested critters in the first place.eupher61 wrote:"but the cat came back, the very next day..."
Jupiter JTU1110
"Real" Conn 36K
"Real" Conn 36K
-
tubashaman2
- 4 valves

- Posts: 713
- Joined: Tue Nov 25, 2008 12:03 am
Re: Dents???
.
Last edited by tubashaman2 on Sun Jan 31, 2010 11:19 am, edited 1 time in total.
Miraphone 1291CC
PT 10S (Made in East Germany, GDR)
YFB 621S
PT 10S (Made in East Germany, GDR)
YFB 621S
- sloan
- On Ice

- Posts: 1827
- Joined: Thu Mar 18, 2004 10:34 pm
- Location: Nutley, NJ
Re: Dents???
You must be terribly unlucky. Cats dent your tuba and repairmen make errors. What have you done to deserve this?tubashaman2 wrote:I am going to pick up my tuba.
The repairman is giving it for free because he could not get the entire dent out and said the lacquer is starting to peel.
I will just find a repair man whereever I do my masters to take the horn apart and fix his error, at least I tried.
Kenneth Sloan
-
tubashaman2
- 4 valves

- Posts: 713
- Joined: Tue Nov 25, 2008 12:03 am
Re: Dents???
.
Last edited by tubashaman2 on Sun Jan 31, 2010 11:19 am, edited 1 time in total.
Miraphone 1291CC
PT 10S (Made in East Germany, GDR)
YFB 621S
PT 10S (Made in East Germany, GDR)
YFB 621S
