Listerine in lead pipe?

The bulk of the musical talk
Post Reply
Wes Krygsman
3 valves
3 valves
Posts: 374
Joined: Fri Apr 02, 2004 6:20 am
Location: Clifton, New Jersey

Listerine in lead pipe?

Post by Wes Krygsman »

I remember reading a post about someone who pours listerine down their leadpipe to clean it out. I need a quick fix for a really bad smell(and taste) in my leadpipe and was considering this. Just wanted to know if I should let it go through the valves and out the spit valve, or if i should take out the valves and let it come out the bottom of the valve casing. Also, before I go and do this, is there any problems that can occur to my tuba because of this.
Wes Krygsman

Adjunct professor-Kean University
Freelance musician-NJ/NYC area & private lessons

Nirschl York 6/4 CC
Yamaha 821 F
Cerveny 601 Kaiser BBb
Yamaha Ybb 103 BBb
Conn 36k Fiberglass sousaphone BBb
User avatar
Chuck(G)
6 valves
6 valves
Posts: 5679
Joined: Fri Mar 19, 2004 12:48 am
Location: Not out of the woods yet.
Contact:

Post by Chuck(G) »

Wes, are you sure it's your leadpipe and not further downstream? You might look into the do-it-yourself vinegar treatment (search this BBS) or have a local repair guy chem- or ultrasonic-clean your instrument.

Are you sure the horn's not picking up a smell from the case?
User avatar
MaryAnn
Occasionally Visiting Pipsqueak
Occasionally Visiting Pipsqueak
Posts: 3217
Joined: Fri Mar 19, 2004 9:58 am

Post by MaryAnn »

I use Listerine (the yellow kind) on my horn leadpipe on a regular basis. It seems to work very well, de-stinking it to my satisfaction. Haven't tried/needed it beyond that point.
MA

Addition: I do this with a snake, not just the Listerine. I remove the tuning slide, which is before the valves, and snake the leadpipe from both ends.
Last edited by MaryAnn on Tue Dec 14, 2004 9:45 am, edited 1 time in total.
Wes Krygsman
3 valves
3 valves
Posts: 374
Joined: Fri Apr 02, 2004 6:20 am
Location: Clifton, New Jersey

Post by Wes Krygsman »

The smell is definitely in the leadpipe. Cleaned out my mouthpiece, smelled my tuning slide and valves, and it's definitely in my leadpipe. I had a chem clean in August from Matt @ Dillon's and he did a great job. The problem is that I forget every once in a while to brush my teeth right before I play and I have the feeling that some bits of food got stuck in there and are all disgusting now.
So anyway, I was really just curious to see if pouring Listerine would have any negative effects on the horn or the valves, and if it does, how the people that use Listerine on their horns do so only through their leadpipes. Also, I don't know how much to use and stuff like that. Thanks for the replies so far...Anyone else have any advice or suggestions with the Listerine thing?
Wes Krygsman

Adjunct professor-Kean University
Freelance musician-NJ/NYC area & private lessons

Nirschl York 6/4 CC
Yamaha 821 F
Cerveny 601 Kaiser BBb
Yamaha Ybb 103 BBb
Conn 36k Fiberglass sousaphone BBb
User avatar
Chuck(G)
6 valves
6 valves
Posts: 5679
Joined: Fri Mar 19, 2004 12:48 am
Location: Not out of the woods yet.
Contact:

Post by Chuck(G) »

Wes Krygsman wrote:Anyone else have any advice or suggestions with the Listerine thing?
Use a trombone snake to scrub the gunk out when you clean the leadpipe. Just pouring stuff down it won't de-gunk it.

You may not even need any Listerine if you use a little detergent in warm water with snake. Rinse afterwards.

Ick. :shock:
User avatar
Dan Schultz
TubaTinker
TubaTinker
Posts: 10424
Joined: Thu Mar 18, 2004 10:46 pm
Location: Newburgh, Indiana
Contact:

Post by Dan Schultz »

mandrake wrote: My old music teacher said that one should dry the instrument right after cleaning it and then assemble or else the slides may not fit back into the instrument. Please tell me that she was full of what we'll call "baloney".
She must've had some pretty crummy water!
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
Ryan_Beucke
3 valves
3 valves
Posts: 256
Joined: Tue Sep 21, 2004 6:31 pm
Location: Potsdam, NY

Post by Ryan_Beucke »

mandrake wrote: My old music teacher said that one should dry the instrument right after cleaning it and then assemble or else the slides may not fit back into the instrument. Please tell me that she was full of what we'll call "baloney".
Pretty much, yes she is. Although, having the instrument taken apart for longer periods of time does increase the chances of something getting dropped or dented, so I guess it makes sense...?
Anyways, I always let the horn air dry after cleaning it. If you dry it, you need a cloth that is 100% lint free, because even tiny stuff will slow down your valves.
User avatar
JayW
4 valves
4 valves
Posts: 579
Joined: Fri Mar 19, 2004 2:18 am
Location: Northern NJ aka NYC suburb
Contact:

Post by JayW »

Wes,

call or e-mail me.... I clean my 52J all the time and will be glad to help if you want help with a "do it yourself" process.
Jay
proud new owner of a kick arse Eastman 632
Photographer
Dog Lover
Hiker
Post Reply