Such terrible news!
I have a friend that I met back in high school that has a Miraphone 188/186 (can't remember) that has the valves redirected to the left for medical reasons. His name is Eddie Brown and his username is Ejbrown1. I'm not sure if he frequents the board much but you might try to PM him to possibly get some advice as to how he approached the situation. Good luck!
-CT
Injured, and looking for a left handed tuba.
- Casey Tucker
- 3 valves
- Posts: 463
- Joined: Sun Mar 26, 2006 12:25 pm
- Location: Houston
-
- 5 valves
- Posts: 1133
- Joined: Sat Jun 26, 2010 5:19 pm
Re: Injured, and looking for a left handed tuba.
A rotary tuba modification makes alot of sense. To do the same on a piston horn would require a greater deal of work. Don't bend yourself into a pretzel to play. I can't imagine that having to reach a great distance around your horn can do anything good for your airway...
-
- 5 valves
- Posts: 1579
- Joined: Sat Mar 20, 2004 11:01 am
Re: Injured, and looking for a left handed tuba.
I crossed paths with Eddie a few times years ago.Casey Tucker wrote:Such terrible news!
I have a friend that I met back in high school that has a Miraphone 188/186 (can't remember) that has the valves redirected to the left for medical reasons. His name is Eddie Brown and his username is Ejbrown1. I'm not sure if he frequents the board much but you might try to PM him to possibly get some advice as to how he approached the situation. Good luck!
-CT
For a couple of years he had a St. Pete that was converted to play with the left hand. I believe he eventually ended up with a Miraphone 186 setup the same way. He went to UNT (I think) to study with Don Little...might be able to track him down that way?
The Darling Of The Thirty-Cents-Sharp Low D♭'s.
-
- pro musician
- Posts: 183
- Joined: Thu Mar 18, 2004 11:20 pm
- Location: New York, NY
Re: Injured, and looking for a left handed tuba.
Thanks to everyone for all the advice! You have all been very helpful.
update: Matt Walters is converting one of my rotary tubas for left hand use. I'll put it on a Tuba Tamer, and should be all set for the next few months.
update: Matt Walters is converting one of my rotary tubas for left hand use. I'll put it on a Tuba Tamer, and should be all set for the next few months.
-
- 4 valves
- Posts: 753
- Joined: Thu Apr 01, 2004 11:34 am
- Location: New England
Re: Injured, and looking for a left handed tuba.
I think the rotary conversion makes sense.
This would be another possible design option:
viewtopic.php?f=2&t=41860
This would be another possible design option:
viewtopic.php?f=2&t=41860
Tubas
-
- 3 valves
- Posts: 302
- Joined: Tue Jun 22, 2004 8:53 am
- Location: Livingston MT
Re: Injured, and looking for a left handed tuba.
I found that I can use the valves on my Miraphone 1290 and my Conn 3J with my left hand. It is not the most comfortable situation but it will work. I am wondering if you checked various front action piston valve horns that you might find one that would work for you without the cost of alterations. Too bad that Walter Sear isn't here any more as his shop used to have a great many different models of horns.
Good luck, Phil
Good luck, Phil
-
- bugler
- Posts: 230
- Joined: Tue May 05, 2009 6:31 pm
- Location: I'd prefer a trout stream
Re: Injured, and looking for a left handed tuba.
About 30+ years ago I did a left hand conversion for a tubist who had a severe long term injury to their right hand and arm. Even then it was expensive as it involved about two weeks of labor as we also altered the lead pipe to come across the top bow for better balance. The reach "around the front option" should work and if you can find one of the valve top action Yamahas you might even be able to use the fourth valve. A smart repairman might be able to work out an extention to make the valve reachable with your pinky. A Besson might work too as you might be able to use your right hand to depress the fourth valve on a besson without putting any real strain or pressure on your arm.
The music shop is closed so no can help with a conversion and frankly it was a real pain to do.
Good luck and get well soon!!
The music shop is closed so no can help with a conversion and frankly it was a real pain to do.
Good luck and get well soon!!
-
- bugler
- Posts: 60
- Joined: Sun Nov 20, 2005 11:01 am
- Location: Las Vegas, NV
Re: Injured, and looking for a left handed tuba.
I was looking for a left handed tuba around 1 year ago, due to a stroke many, many moons ago. I was going to covert either a MW 186 (BBb) and/or a cheap Chinese tuba. However, after talking to 2 repairmens (both of them either was pro or studied with major university professor), I decieded to go with a piston valves instead of rotories. No cost repair, but you will need to practice a little due to the arragements of the right finger placement. I am very happy and now playing with a small community band.
Charles Atkins
Charles Atkins
Charles Atkins
1958 Conn 4J with new parts...
1958 Conn 4J with new parts...
- J.c. Sherman
- 6 valves
- Posts: 2116
- Joined: Mon Apr 11, 2005 1:11 pm
- Location: Cleveland
- Contact:
Re: Injured, and looking for a left handed tuba.
That wouldn't be excruciatingly difficult.Neptune wrote:What a dreadful thing to happen.
I wonder on a rotary tuba it would be possible to move the keys to the left hand side and put temporary linkage to the valves? If you don't have a rotary tuba, then you could get an old one to convert - to be restored to normal and sold once you recover.
Good luck!
Instructor of Tuba & Euphonium, Cleveland State University
Principal Tuba, Firelands Symphony Orchestra
President, Variations in Brass
http://www.jcsherman.net
Principal Tuba, Firelands Symphony Orchestra
President, Variations in Brass
http://www.jcsherman.net
- MileMarkerZero
- 3 valves
- Posts: 431
- Joined: Fri Mar 19, 2004 9:54 am
- Location: Knoxville, Tennessee
Re: Injured, and looking for a left handed tuba.
This is the best pic I could find of one, but the Alex 173 has the valves "flipped" so that the 2nd slide points out to the left and the linkage attaches to the valves on the backside of the horn:
That might make this horn easier to convert to left hand if you can find one. One other thing about these horns (having noodled around on one at a TC several years ago) is that the valve throw is very short. I think that's mostly due to a mechanical advantage gained by the differing lengths of the linkage rods, but it felt like the valve throw was about halfway between a standard rotary tuba and a french horn. About like an old Conn short-action set.
That might make this horn easier to convert to left hand if you can find one. One other thing about these horns (having noodled around on one at a TC several years ago) is that the valve throw is very short. I think that's mostly due to a mechanical advantage gained by the differing lengths of the linkage rods, but it felt like the valve throw was about halfway between a standard rotary tuba and a french horn. About like an old Conn short-action set.
SD
I am convinced that 90% of the problems with rhythm, tone, intonation, articulation, technique, and overall prowess on the horn are related to air issues.
I am convinced that 90% of the problems with rhythm, tone, intonation, articulation, technique, and overall prowess on the horn are related to air issues.