MP sugestions for Yamaha Eb tuba?

The bulk of the musical talk
Post Reply
Alex F
4 valves
4 valves
Posts: 798
Joined: Fri Mar 19, 2004 12:39 am
Location: Chicago

MP sugestions for Yamaha Eb tuba?

Post by Alex F »

The used Yamaha YEB-321S I just recieved came with a Denis Wick 5L mp. I stuck it in and was pleased at how well I was able to get the tuba to play clearly and in tune. Once I got down towards the bottom though, the notes did peter out a bit. Some of that was due to may lack of familiarity with the fingerings, which will require some work on my part.

Regardless,as expected from any member of TubeNet, my thoughts runed to what other mps might work well with this particular tuba. I notice that the Wick site recommends the used of the 3 and 4 mps with Ebs (L or not L). My search of TuneNet recalled some discussions suggesting that the 3L being based on the Bach 24AW and widely used in the UK by Eb players.

So, for those of you that play the Yamaha Eb (321, 381, or 632), what do you use? What do you other Eb players use on your Bessons or MWs or ? . I think Yamaha shiped these with their 66D4 and do not know what that mp is equal to. I have not had much success with the 2L, finding it hard to center (for me). Maybe a 3L or 4L? or???

This is more for future reference. Right now, I think I'll continue using the 5L until I get my Eb skills up to snuff as it seems to give me a pretty clear center of the pitch.

As always, thanks.
User avatar
iiipopes
Utility Infielder
Utility Infielder
Posts: 8580
Joined: Tue Sep 06, 2005 1:10 am

Re: MP sugestions for Yamaha Eb tuba?

Post by iiipopes »

Two common mouthpieces are the Wick 3L and the Bach 24AW.
Jupiter JTU1110
"Real" Conn 36K
User avatar
cjk
5 valves
5 valves
Posts: 1915
Joined: Fri Mar 19, 2004 12:16 pm

Re: MP sugestions for Yamaha Eb tuba?

Post by cjk »

How about a Sellmansberger Imperial? ^Joe^ does offer a trial period.

viewtopic.php?f=2&t=42828&p=371756&hili ... al#p371756" target="_blank

viewtopic.php?f=2&t=43118&p=374572&hili ... al#p374572" target="_blank
Bob Kolada
6 valves
6 valves
Posts: 2632
Joined: Sun Jul 19, 2009 1:57 pm
Location: Chicago

Re: MP sugestions for Yamaha Eb tuba?

Post by Bob Kolada »

I've always liked my Bach 18 on Eb's.
User avatar
opus37
5 valves
5 valves
Posts: 1326
Joined: Wed Sep 15, 2010 4:22 pm
Location: Woodbury, MN

Re: MP sugestions for Yamaha Eb tuba?

Post by opus37 »

I like the Bloke Imperial for my Martin Eb. I tried the Denis wick #3 and #2 and found them o.k. but the Imperial made the horn. I like the brightness and easy blowing characteristics. The Wick bore is too open for my taste.
Brian
1892 Courtiere (J.W. Pepper Import) Helicon Eb
1980's Yamaha 321 euphonium
2007 Miraphone 383 Starlight
2010 Kanstul 66T
2016 Bubbie Mark 5
User avatar
ppalan
3 valves
3 valves
Posts: 482
Joined: Fri Nov 24, 2006 10:40 pm
Location: Montgomery County, PA

Re: MP sugestions for Yamaha Eb tuba?

Post by ppalan »

I have the same horn. I've originally used a Lasky 28H but the mp I'm using now is a Blokepiece Symphony with a #2 rim for ensemble stuff and the Solo piece with the same rim. I'm sold on these mp's. I've recently started trying the Imperial but haven't had it long enough to offer a really valid opinion.The Symphony let's me put out a really "fat" sound even at fairly loud volumes and the Solo I've used for just that. It allows me to produce a very focused and clear sound that cuts through.
PWP
ppalan
Mirafone186 CC 4v
Yamaha Eb 321
Wessex "Berg" F
User avatar
T. J. Ricer
pro musician
pro musician
Posts: 446
Joined: Sun Mar 06, 2005 12:17 pm
Contact:

Re: MP sugestions for Yamaha Eb tuba?

Post by T. J. Ricer »

I've had good luck on those horns with variations on the original Helleberg: the Canadian Brass Dallenbach, the Laskey 28H, etc.

I currently play mine on a Blokepiece/Sellmansberger Solo #1.

Let us know what you settle on.

--T. J.
Thomas J. Ricer, DMA
Royal Hawaiian Band - University of Hawaii at Manoa - Yamaha Performing Artist

http://www.TJRicer.com

"Life is what happens to you while you're busy making other plans." -John Lennon
User avatar
MikeS
bugler
bugler
Posts: 214
Joined: Mon Jan 15, 2007 8:46 am

Re: MP sugestions for Yamaha Eb tuba?

Post by MikeS »

Since we seem to have a lot of variety here, I guess I'll add a bit more. When I had a 381 I was quite happy using a PT-72 with it.
tubahero300
bugler
bugler
Posts: 57
Joined: Sat Dec 05, 2009 11:39 am

Re: MP sugestions for Yamaha Eb tuba?

Post by tubahero300 »

i use a pt-72 with my yamaha yeb 321s. its great
Gronitz PCK
Yamaha YEB 321s
Jinbao TU-600 w/ Jones Trigger (arriving soon)
Micro Travel FF (arriving soon)
User avatar
bill
3 valves
3 valves
Posts: 317
Joined: Fri May 20, 2005 5:30 pm
Location: Scappoose, OR

Re: MP sugestions for Yamaha Eb tuba?

Post by bill »

Just a shot at stating the obvious, I use Yamaha 64 and 65 on Bass tubas and like the effect. Many Yamaha Tubas come with 67C4 mouthpieces but I find these too shallow to get the most out of the horns, especailly the low end. A Wick 4 (don't think I'd use the "L" version) and a Yamaha 64 are about the same diameter and a 65 is a little larger. Did one of these mouthpieces (64, 65) come with the horn, by chance?
Always make a good sound; audiences will forget if you miss a note but making a good sound will get you the next job.
User avatar
tubaplyer
bugler
bugler
Posts: 113
Joined: Wed Jun 21, 2006 4:34 pm
Location: Columbus, GA

Re: MP sugestions for Yamaha Eb tuba?

Post by tubaplyer »

Laskey 28C and G&W Churada Depends on material. Laskey is the go to for my YEB 321S
"Don't encourage mediocrity. Play at your best and don't be second class in the
head." - A.J. Master Class 1988
User avatar
imperialbari
6 valves
6 valves
Posts: 7461
Joined: Fri Mar 19, 2004 3:47 am

Re: MP sugestions for Yamaha Eb tuba?

Post by imperialbari »

bill wrote:Just a shot at stating the obvious, I use Yamaha 64 and 65 on Bass tubas and like the effect. Many Yamaha Tubas come with 67C4 mouthpieces but I find these too shallow to get the most out of the horns, especailly the low end. A Wick 4 (don't think I'd use the "L" version) and a Yamaha 64 are about the same diameter and a 65 is a little larger. Did one of these mouthpieces (64, 65) come with the horn, by chance?
Your posting once again makes me aware of at least two main approaches in tuba mouthpiece designs. The pieces you mention are of the narrow aperture & deep cup type to paint a sharp picture (even if there are several modifications within the main types). Another approach rather has a wide aperture and a less deep cup (at least as long as we talk bass tuba pieces).

Having played the French horn I expected the narrow/deep type working for me on my smallest bass tubas. They didn’t, as I felt my embouchure constrained and my dynamic span disappeared. I got better results with wider/shallower mouthpieces, especially if they have the reverse throat taper like seem with Mike Finn’s models and with the blokepieces.

Klaus
User avatar
DonShirer
4 valves
4 valves
Posts: 571
Joined: Fri Mar 19, 2004 9:08 am
Location: Westbrook, CT

Re: MP sugestions for Yamaha Eb tuba?

Post by DonShirer »

Strangely, when I owned a 321, I found that a Kellyburg plastic mouthpiece worked much better than the shallow mp recommended by the manufacturer. I suspect, though, that it has as much to do with the player as the instrument, so this might not work for you. Of course if you have many outside gigs, especially in chilly weather, a plastic mouthpiece is just good sense.
Last edited by DonShirer on Thu Jun 16, 2011 6:10 pm, edited 1 time in total.
Don Shirer
Westbrook, CT
bldg. 450
lurker
lurker
Posts: 5
Joined: Thu Dec 31, 2009 10:32 pm

Re: MP sugestions for Yamaha Eb tuba?

Post by bldg. 450 »

I've used a Doug Elliot shallow cup with a 126 rim on my 321S; it was one of his old "L" series setups. I don't know his modern equivalents.
Lately I switched to a Mike Finn "H" and love the bigger, darker & fuller sound I get from it.
User avatar
GC
5 valves
5 valves
Posts: 1800
Joined: Fri Mar 19, 2004 5:52 am
Location: Rome, GA (between Rosedale and Armuchee)

Re: MP sugestions for Yamaha Eb tuba?

Post by GC »

If you want a fairly bright tone that still has some depth, you might consider the Rudolf Meinl 9. It has a cup in between the Bach 24 and 18 in diameter, and it's a medium-shallow bowl. It's available in .78 and .80 throats. Lee Stofer sells them.
JP/Sterling 377 compensating Eb; Warburton "The Grail" T.G.4, RM-9 7.8, Yamaha 66D4; for sale > 1914 Conn Monster Eb (my avatar), ca. 1905 Fillmore Bros 1/4-size Eb, Bach 42B trombone
euphomate
bugler
bugler
Posts: 112
Joined: Tue Mar 11, 2008 1:34 am
Location: Australia

Re: MP sugestions for Yamaha Eb tuba?

Post by euphomate »

I use a Wick 3L on my Besson Sovereign EEb. I use the same mp on my Yamaha 321 EEb. After years of experimenting with a range of mps on both horns, I have finally settled on the said Wick. On the Sov, the Wick 3L gives me the biggest and warmest orchestral sound of all many pieces I have tried. It does the same on the 321, and being a smaller bore/bell horn than the Besson, it needs all the help it can get in that regard. I also use a Wick 5L for a while on occasions when I have concentrated soley on euphonium for an extended period, and find the 3L an uncomfortable step up from my Wick SM4 euph mp. I will use the 5L only as a transition mp long enough for my chops to relax into a tuba embouchure, then step up to the 3L. The 5L produces a reasonable sound on the 321, although a little "harder" than the 3L. It also is not as comfortable in the lower register as you have found, but it is an easy mp to center, and therefore an excellent item to get back into shape. But move up when you feel ready.
Besson BE982 Sovereign EEb tuba
Wessex Champion EEb tuba
Stencil compensating euphonium
Post Reply