In September all 3 models of the Willson Euphonium (2900, 2950 & 2960) will be in the UK with a new lead pipe configuration, designated UK models.
Prototypes have been tested here with excellent results. I had my own older (1992) 2900 converted that pretty much transformed the instrument;
http://s91.photobucket.com/albums/k309/highams/" target="_blank
CB
Willson variants
-
Highams
- pro musician
- Posts: 793
- Joined: Fri Mar 19, 2004 3:17 am
- Location: Slough, Berkshire, England
- Contact:
Willson variants
Aspire & Be Inspired !
-
JTJ
- bugler
- Posts: 163
- Joined: Fri Mar 26, 2004 9:21 pm
- Location: Chapel Hill NC
Re: Willson variants
Hi Charley, what do the changes do to the sound and response of the instrument?
John
John
-
tokuno
- 3 valves
- Posts: 270
- Joined: Thu Apr 26, 2007 12:51 am
Re: Willson variants
I have a 2975/cb-30
Is that an affected model, as well?
Is that an affected model, as well?
-
Highams
- pro musician
- Posts: 793
- Joined: Fri Mar 19, 2004 3:17 am
- Location: Slough, Berkshire, England
- Contact:
Re: Willson variants
Hi,
initially, these are for the UK market and only applies to those models as far as I know.
Re your enquiry John;
A prototype 2960 was sent over with the new leadpipe. It's identical to the York one only with a different receiver. Those who play tested it did not want to give it back!
I never got a chance to try that one, but on good advice decided to convert my own 20 year old 2900 using an Eminence York lead pipe.
The original (large shank, not euro shank) mouthpipe was heavily soldered onto the bell, the current one sits completely off the bell with extra strong solder joints at the valve block & receiver stay. There's an option for that to have a stay fitted if nesc. later, but so far it works well.
The instrument has always played very well, I have lost count of the number of offers to sell it I have turned down (the factory sent me a new model in 2006 as a Willson sponsored artist).
I've played it for 4 days now and did the first solo on it tonight with the BBC Winds. It's a dream!
It has freed up the instrument & range and is so much more responsive. Intonation is fine and the high tc C & D notes sing nicely. Only the high tc F has moved slightly, but I'm sure that will find it's slot in time.
A very good move I think!
Chas
initially, these are for the UK market and only applies to those models as far as I know.
Re your enquiry John;
A prototype 2960 was sent over with the new leadpipe. It's identical to the York one only with a different receiver. Those who play tested it did not want to give it back!
I never got a chance to try that one, but on good advice decided to convert my own 20 year old 2900 using an Eminence York lead pipe.
The original (large shank, not euro shank) mouthpipe was heavily soldered onto the bell, the current one sits completely off the bell with extra strong solder joints at the valve block & receiver stay. There's an option for that to have a stay fitted if nesc. later, but so far it works well.
The instrument has always played very well, I have lost count of the number of offers to sell it I have turned down (the factory sent me a new model in 2006 as a Willson sponsored artist).
I've played it for 4 days now and did the first solo on it tonight with the BBC Winds. It's a dream!
It has freed up the instrument & range and is so much more responsive. Intonation is fine and the high tc C & D notes sing nicely. Only the high tc F has moved slightly, but I'm sure that will find it's slot in time.
A very good move I think!
Chas
Aspire & Be Inspired !