Inefficient tubas...

The bulk of the musical talk
jon112780
4 valves
4 valves
Posts: 541
Joined: Sat Mar 20, 2004 10:52 am
Location: on my soapbox...

Inefficient tubas...

Post by jon112780 »

What horns have you played that were any of these:

-Inefficient (put lots of air in, not as much sound comes out)?
-Moderately stuffy?
-'Dead' (plays real small, bell doesn't ring)?
-Sound doesn't really get past the bell


What other descriptive characteristics did I miss?


The horns I would choose would be: Mirafone 1295 CC, Yamaha 201 BBb, Yamaha 321 BBb
Energizer Bunny arrested, charged with battery.
User avatar
k001k47
5 valves
5 valves
Posts: 1469
Joined: Sun Aug 12, 2007 2:54 am
Location: Tejas

Re: Inefficient tubas...

Post by k001k47 »

A Mirafone 186 four valve CC. I'm not saying the 186 is a bad horn. In fact, I love them. This horn was just beat half to death.
Bob Kolada
6 valves
6 valves
Posts: 2632
Joined: Sun Jul 19, 2009 1:57 pm
Location: Chicago

Re: Inefficient tubas...

Post by Bob Kolada »

983 :P
User avatar
MartyNeilan
6 valves
6 valves
Posts: 4878
Joined: Fri Mar 19, 2004 3:06 am
Location: Practicing counting rests.

Re: Inefficient tubas...

Post by MartyNeilan »

When I haven't been practicing much, most tubas seem very inefficient. Once I start putting in a little face time, they become remarkably efficient. Seriously.
The majority of efficiency seems to come from my chops.
Ace
5 valves
5 valves
Posts: 1395
Joined: Fri Mar 19, 2004 12:46 am
Location: Berkeley, CA

Re: Inefficient tubas...

Post by Ace »

I have a Jupiter valve trombone in C which shipped with a 12 C mouthpiece. The sound was very good, but when I experimented with some smaller mouthpieces (Schilke 40, Bach 19) the horn became even more alive and robust.

Ace
User avatar
ShoelessWes
bugler
bugler
Posts: 226
Joined: Mon Nov 28, 2011 6:24 pm
Contact:

Re: Inefficient tubas...

Post by ShoelessWes »

Cerveny, anything.
Shoeless Wesley Pendergrass

Visual Designer/Consultant/Instructor
Freelance Musician


http://www.shoelessmusic.com
User avatar
Lectron
4 valves
4 valves
Posts: 771
Joined: Sun Sep 04, 2011 5:25 am
Location: Norway

Re: Inefficient tubas...

Post by Lectron »

ShoelessWes wrote:Cerveny, anything.
A couple of my cervenys played by themselves....
Oh...I've only had a couple....

edit: My two Cervenys
Melton 200 -=- Melton 2141 -=- Cerveny 883 Opera -=- Besson 992 -=- MPCs: 3pcs steel (Sellmansberger/Parker)
User avatar
jonesbrass
4 valves
4 valves
Posts: 923
Joined: Wed Dec 20, 2006 11:29 am
Location: Sanford, NC

Re: Inefficient tubas...

Post by jonesbrass »

bloke wrote:<SIDEBAR>

There certainly are bad ("inefficient") instruments, but there are also some players who don't understand the instruments they've been dealt.

</SIDEBAR>
A poor craftsman blames his tools.
Willson 3050S CC, Willson 3200S F, B&S PT-10, BMB 6/4 CC, 1922 Conn 86I
Gone but not forgotten:
Cerveny 681, Musica-Steyr F, Miraphone 188, Melton 45, Conn 2J, B&M 5520S CC, Shires Bass Trombone, Cerveny CFB-653-5IMX, St. Petersburg 202N
User avatar
basspiper
bugler
bugler
Posts: 49
Joined: Mon May 30, 2011 4:47 pm
Location: Mid-MO

Re: Inefficient tubas...

Post by basspiper »

jonesbrass wrote:
A poor craftsman blames his tools.
Except golf clubs.
Dave
TubaRay
6 valves
6 valves
Posts: 4109
Joined: Mon Mar 22, 2004 4:24 pm
Location: San Antonio, Texas
Contact:

Re: Inefficient tubas...

Post by TubaRay »

jonesbrass wrote: A poor craftsman blames his tools.
Well, it certainly couldn't be my fault I don't have a "world class sound." Not in today's USA.
Ray Grim
The TubaMeisters
San Antonio, Tx.
User avatar
b.williams
4 valves
4 valves
Posts: 618
Joined: Fri May 29, 2009 9:32 am

Inefficient Tubas

Post by b.williams »

Besson 3 Valve compensating BBb
Last edited by b.williams on Sun Mar 11, 2012 2:49 pm, edited 5 times in total.
Miraphone 191
Yamaha YBL-613HS Bass Trombone
User avatar
Lectron
4 valves
4 valves
Posts: 771
Joined: Sun Sep 04, 2011 5:25 am
Location: Norway

Re: Inefficient tubas...

Post by Lectron »

I agree on the Besson and B&H BBb
The Ebs has varied so much it's hard to judge without a date behind the model.
Melton 200 -=- Melton 2141 -=- Cerveny 883 Opera -=- Besson 992 -=- MPCs: 3pcs steel (Sellmansberger/Parker)
User avatar
Dan Schultz
TubaTinker
TubaTinker
Posts: 10427
Joined: Thu Mar 18, 2004 10:46 pm
Location: Newburgh, Indiana
Contact:

Re: Inefficient tubas...

Post by Dan Schultz »

"efficiency" is an interesting term to apply to tubas in general. I like a big, round sound that is difficult to achieve using a small tuba. My favorites are the Miraphone 1291 and the 5/4 Marzans (Bohm & Meinl).

I work my butt off trying to get that kind of sound out of a Yamaha YBB-103... and never get there.

It seems like I can just 'breathe' into one of the larger horns. Some folks think that the larger horns take a lot of air. There may be some truth in them taking a lot of air. But... overall... it seems to me that I use A LOT less energy getting the sound I want.

A high volume of air with less pressure suits me just fine.
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
glangfur
bugler
bugler
Posts: 151
Joined: Mon Apr 12, 2004 3:33 pm
Location: Boston, MA

Re: Inefficient tubas...

Post by glangfur »

jonesbrass wrote:
bloke wrote:<SIDEBAR>

There certainly are bad ("inefficient") instruments, but there are also some players who don't understand the instruments they've been dealt.

</SIDEBAR>
A poor craftsman blames his tools.
As much truth as there is in this simple adage, the more I think about it the more I think it is flawed. In my experience the best craftsmen - in every field - care a lot about their tools, make sure they have the best and most appropriate tools available for the work they do, and take good care of them.
Gabe Langfur
Bass Trombonist
Rhode Island Philharmonic
Vermont Sympony

Lecturer of Bass Trombone, Boston University
Guest Artist/Teacher in Trombone, U of RI

S. E. Shires Co.
gabe@seshires.com" target="_blank" target="_blank
User avatar
ken k
6 valves
6 valves
Posts: 2372
Joined: Sun Mar 21, 2004 11:02 pm
Location: out standing in my field....

Re: Inefficient tubas...

Post by ken k »

i think the reason the Besson horns and the B&H are deemed inefficient is because they are built like tanks with heavy guage brass and lots of bracing. So they do not get "edgy" or "colorful" like other lighter weight horns, but rather maintain the same dark tone throughout their dynamic range. This is a reason many people do not care for them. I believe however that the sound indeed does carry out to the audience. It just does not have that quick, up-close response that other horns have. So I guess you could say it is less efficient, if you equate efficiency with the ability to get that "edgier" type of tone.

This is one reason I started using a shallower cup mouthepice (blokepiece solo) which helps give a little more edge or definition to their sound.

At least that is my story and I am sticking to it....

kenk
B&H imperial E flat tuba
Mirafone 187 BBb
1919 Pan American BBb Helicon
1924 Buescher BBb tuba (Dr. Suessaphone)
2009 Mazda Miata
1996 Honda Pacific Coast PC800
arpthark
5 valves
5 valves
Posts: 1195
Joined: Thu Feb 28, 2008 4:14 pm

Re: Inefficient tubas...

Post by arpthark »

Not really inefficient - it makes a big sound - but the MW 2155 is an air hog, IMHO. Borrowing one for a couple days and it takes a lot of air for it to play the way I want it to.
eupher61
6 valves
6 valves
Posts: 2790
Joined: Tue Oct 10, 2006 9:37 pm

Re: Inefficient tubas...

Post by eupher61 »

basspiper wrote:
jonesbrass wrote:
A poor craftsman blames his tools.
Except golf clubs.
Dave
and disc golf discs.
Chadtuba
pro musician
pro musician
Posts: 1005
Joined: Thu Jun 29, 2006 7:00 pm
Location: Minnesota

Re: Inefficient tubas...

Post by Chadtuba »

Bob Kolada wrote:983 :P
Gonna have to disagree with you on this one. I find my 983 to speak very well. I can get an edge on the tone if desired and I can fill the hall with little to no problem. I love my 983 and find it to be a very efficient horn, but I also know that we all have differing experiences and are entitled to our own opinions.
PMeuph
5 valves
5 valves
Posts: 1382
Joined: Tue Nov 06, 2007 7:36 pm
Location: Canada

Re: Inefficient tubas...

Post by PMeuph »

glangfur wrote:
jonesbrass wrote:
bloke wrote:<SIDEBAR>

There certainly are bad ("inefficient") instruments, but there are also some players who don't understand the instruments they've been dealt.

</SIDEBAR>
A poor craftsman blames his tools.
As much truth as there is in this simple adage, the more I think about it the more I think it is flawed. In my experience the best craftsmen - in every field - care a lot about their tools, make sure they have the best and most appropriate tools available for the work they do, and take good care of them.
This will be nit-picky...

I agree with your statement that great craftsmen have great tools. However, the issue of the adage is that a poor craftsmen blames is tools, not that a great craftsmen can work on poor tools. Indeed, some people I know have purchased high end instruments and equipment and still blame the horn for their mistakes. (eg. "It's not my fault I couldn't play that high note didn't sound, my new mouthpiece is not great for high range"). I think a poor musician will still find issue with the best of horns and blame the horns instead of recognizing that they lack practice.

Ultimately, there was no need to assert the adage is flawed. In any given statement, one should never expect that the opposite holds true....

For reference:
http://en.wikipedia.org/wiki/Syllogism" target="_blank
http://en.wikipedia.org/wiki/Affirmativ ... ve_premise" target="_blank
Yamaha YEP-642s
Boosey & Hawkes 19" Bell Imperial EEb
User avatar
jonesbrass
4 valves
4 valves
Posts: 923
Joined: Wed Dec 20, 2006 11:29 am
Location: Sanford, NC

Re: Inefficient tubas...

Post by jonesbrass »

This is an interesting discussion. I will just submit that I agree, great craftsmen do work with the tools that allow them to produce items of the highest quality. At the same time, those same craftspeople are fully capable of creating great things with "inferior" tools, as well. Ever witness a pro grab an "inferior" or "stuffy" or "crappy" tuba and make it sound like a million bucks? The magic is in the person, not necessarily the tools. Is a great player going to play on the best thing they can find/afford? Absolutely.
Willson 3050S CC, Willson 3200S F, B&S PT-10, BMB 6/4 CC, 1922 Conn 86I
Gone but not forgotten:
Cerveny 681, Musica-Steyr F, Miraphone 188, Melton 45, Conn 2J, B&M 5520S CC, Shires Bass Trombone, Cerveny CFB-653-5IMX, St. Petersburg 202N
Post Reply