Plastic mouthpieces rattling / buzzing in receiver?

The bulk of the musical talk
Post Reply
User avatar
MartyNeilan
6 valves
6 valves
Posts: 4876
Joined: Fri Mar 19, 2004 3:06 am
Location: Practicing counting rests.

Plastic mouthpieces rattling / buzzing in receiver?

Post by MartyNeilan »

I have a plastic (Lexan) mouthpiece that is good for casual uses except for one problem: The tip of the mouthpiece shank often rattles or buzzes in different tuba mouthpeice receivers. I keep this piece in my bag and mostly use it at schools, so the school tubas may be partly to blame. However, it seems to happen on a lot of different horns. One of my students, so enamoured with the clear appearance, borrowed it the other day but had the same problem. I DO NOT want to sound like I am bashing the company that makes these, because I feel it is a good and innovative product, especially for outdoor uses. However, I would just like to know if others have had this problem and if there might be a simple solution.
User avatar
MartyNeilan
6 valves
6 valves
Posts: 4876
Joined: Fri Mar 19, 2004 3:06 am
Location: Practicing counting rests.

Post by MartyNeilan »

Well, the piece appears to be made correctly, no obvious construction flaws. It also inserts firmly into the receiver, the seal appears snug from the outside. The part that seems to be buzzing is the end (tip) of the shank, all the way inside the receiver.
Bob Mosso
bugler
bugler
Posts: 211
Joined: Wed Jan 12, 2005 2:01 pm
Location: southern California
Contact:

Post by Bob Mosso »

Could it have too much taper on the shank?
User avatar
Rick Denney
Resident Genius
Posts: 6650
Joined: Mon Mar 22, 2004 1:18 am
Contact:

Post by Rick Denney »

Bob Mosso wrote:Could it have too much taper on the shank?
No, the Kellyberg I just bought for cold-weather outdoor playing has a standard taper on the shank, and it fits fine with no rattling.

But the shank will not be as stiff as a metal mouthpiece shank, and it will therefore vibrate with more deflection for a given energy. Just the nature of the beast.

Rick "whose Kelleberg glows in the dark" Denney
User avatar
Tubaryan12
6 valves
6 valves
Posts: 2104
Joined: Sat Nov 13, 2004 7:49 am

Post by Tubaryan12 »

Are those plastic mouthpeices any good, other than the fact there is rattling?
Yep
Marzan BBb
John Packer JP-274 euphonium
King 607F
Posting and You
User avatar
Dan Schultz
TubaTinker
TubaTinker
Posts: 10424
Joined: Thu Mar 18, 2004 10:46 pm
Location: Newburgh, Indiana
Contact:

Post by Dan Schultz »

Plastic shrinks directly after the molding process and there is a chance the shank might be slightly undersize... causing it to seat further into the receiver. The injection molding process has a couple of factors that can create size problems.... the injection temperature, and the injection pressure. Either can cause the product to be small.

I have a large variety of mouthpieces including Conn-Hellebergs, Helleberg 7B, Schilke-Helleberg, Bach 18, Yamaha Roger Bobo Solo, yada yada yada.. but I find myself using a Kelly 18 more than anything else. Yup! ... the Kelly's seem to be good.
Last edited by Dan Schultz on Fri Feb 11, 2005 9:56 pm, edited 1 time in total.
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
User avatar
Leland
pro musician
pro musician
Posts: 1651
Joined: Fri Mar 19, 2004 11:54 am
Location: Washington, DC

Post by Leland »

TUBACHRIS85 wrote:Are those plastic mouthpeices any good, other than the fact there is rattling?
As has been said, "Yup."

I was using one almost exclusively for the past year (at least until I got my Bayamo). The Lexan is much nicer to the lips than the standard nylon or Delrin, and it's actually a good shape.

Plus, it has all the benefits of any other plastic-rimmed mouthpiece, namely not sucking the heat away from your chops like metal mouthpieces do. It was no longer a temperature-induced problem to stand around for half an hour and immediately try to play -- even room-temperature metal is 15-20 degrees colder than a warm face.
Lee Stofer
4 valves
4 valves
Posts: 935
Joined: Mon Mar 22, 2004 7:50 am

Post by Lee Stofer »

Schlepporello,
If THAT's the case, remind me to NEVER EVER play a crystal green one! :wink: The crystal red Kellyberg continues to be my favorite.
Lee A. Stofer, Jr.
Post Reply