Mead Springs
-
kprinz
- bugler

- Posts: 76
- Joined: Sun Aug 21, 2011 2:40 am
- Location: Brenham, Texas
Mead Springs
Does anyone have any experience with this product? I play a MW 45slp and was thinking about replacing the springs. I came across these. They come in 2 strengths: regular and lite. Any experiences that you are willing to share would be greatly appreciated.
Kendall Prinz
Tuba, Composition, Music Education
Asst. Director of Bands
Instructor of Tuba & Euphonium
Blinn College
Miraphone 186-5U CC
Miraphone Elektra 481-6U Gold Brass F
Tuba, Composition, Music Education
Asst. Director of Bands
Instructor of Tuba & Euphonium
Blinn College
Miraphone 186-5U CC
Miraphone Elektra 481-6U Gold Brass F
- Rick F
- 5 valves

- Posts: 1679
- Joined: Thu Mar 18, 2004 11:47 pm
- Location: Lake Worth, FL
Re: Mead Springs
Some folks do like the Mead springs. I tried them on my euphonium but they were too strong for my liking. The idea is for the strongest spring on the 1st valve with others progressively weaker down the line. But, they're all pretty strong. I would have liked using 3rd valve spring for ALL of my valves.
Here's a link with more info:
MEADSPRINGS FOR EUPHONIUM AND EEb TUBA/BASS
Here's a link with more info:
MEADSPRINGS FOR EUPHONIUM AND EEb TUBA/BASS
Miraphone 5050 - Warburton BJ/RF mpc
YEP-641S (recently sold), DE mpc (102 rim; I-cup; I-9 shank)
Symphonic Band of the Palm Beaches:
"Always play with a good tone, never louder than lovely, never softer than supported." - author unknown.
YEP-641S (recently sold), DE mpc (102 rim; I-cup; I-9 shank)
Symphonic Band of the Palm Beaches:
"Always play with a good tone, never louder than lovely, never softer than supported." - author unknown.
-
Eflatdoubler
- bugler

- Posts: 216
- Joined: Thu Nov 05, 2009 2:00 am
Re: Mead Springs
I have the regular weight ones on my euphonium. They are quiet, but give your fingers quite a work out! They didn't have the light ones when I purchased them, but I would opt for those at least on my euphonium.
- Rick F
- 5 valves

- Posts: 1679
- Joined: Thu Mar 18, 2004 11:47 pm
- Location: Lake Worth, FL
Re: Mead Springs
There's a two-page review of these springs on Dave Werden's Euph/Tuba forum here.
be sure to click on pg 2 after reading first page.
be sure to click on pg 2 after reading first page.
Miraphone 5050 - Warburton BJ/RF mpc
YEP-641S (recently sold), DE mpc (102 rim; I-cup; I-9 shank)
Symphonic Band of the Palm Beaches:
"Always play with a good tone, never louder than lovely, never softer than supported." - author unknown.
YEP-641S (recently sold), DE mpc (102 rim; I-cup; I-9 shank)
Symphonic Band of the Palm Beaches:
"Always play with a good tone, never louder than lovely, never softer than supported." - author unknown.
- Dan Schultz
- TubaTinker

- Posts: 10427
- Joined: Thu Mar 18, 2004 10:46 pm
- Location: Newburgh, Indiana
- Contact:
Re: Mead Springs
I don't have any experience with the Mead Springs. However... I think the options are a great idea. For my personal horns, I use as light a weight as possible to achieve a pretty delicate balance between ease to press and 'bouncy-ness' upon return. I use Yamaha Eb tuba springs in my 1291, King, and Marzan piston horns. These springs are light enough to not cause me any 'finger-fatigue' but sometimes feel a bit sluggish due to the lubricant being cold or too heavy. Finger pressure and response are matters of personal preferences and having choices is good.
The springs I use most likely would not be the choice of a professional playing fast passages in solos!
The springs I use most likely would not be the choice of a professional playing fast passages in solos!
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
-
XtremeEuph
- 4 valves

- Posts: 598
- Joined: Thu Feb 23, 2006 5:02 pm
Re: Mead Springs
I have a set for my YEP 842. Super strong...almost annoyed me at first. I went away from them, then came back to them, and now I love them. They serve their purpose 100%. I suppose they created a light version after all our complaints about how hard they were to press. But yes, I would recommend some, and the light ones likely at that. I do not know how your horn will react specifically.
- b.williams
- 4 valves

- Posts: 618
- Joined: Fri May 29, 2009 9:32 am
Re: Mead Springs
I find them to be sluggish. I prefer very heavy springs.
Miraphone 191
Yamaha YBL-613HS Bass Trombone
Yamaha YBL-613HS Bass Trombone