venting valves - question - again

The bulk of the musical talk
Post Reply
User avatar
windshieldbug
Once got the "hand" as a cue
Once got the "hand" as a cue
Posts: 11516
Joined: Tue Mar 01, 2005 4:41 pm
Location: 8vb

Re: venting valves - question - again

Post by windshieldbug »

Venting valves only has an effect on slide pulling. If you are not pulling slides prior to attack look elsewhere.
Instead of talking to your plants, if you yelled at them would they still grow, but only to be troubled and insecure?
User avatar
k001k47
5 valves
5 valves
Posts: 1469
Joined: Sun Aug 12, 2007 2:54 am
Location: Tejas

Re: venting valves - question - again

Post by k001k47 »

bloke wrote:
nworbekim wrote:it feels as if there is air pressure building up somewhere and having to be released.

it's not a big problem, more of an aggravation. a slight glitch that makes me uncomfortable and if i can tweak it out, so much the better.
yeah...That happens to me too... :oops:
:lol:
User avatar
sousaphone68
4 valves
4 valves
Posts: 980
Joined: Thu Jun 02, 2011 6:46 pm
Location: Ireland

Re: venting valves - question - again

Post by sousaphone68 »

Do you experience the problem on open notes or just certain valve combinations?
Cant carry a tune but I can carry a tuba.
Image
User avatar
k001k47
5 valves
5 valves
Posts: 1469
Joined: Sun Aug 12, 2007 2:54 am
Location: Tejas

Re: venting valves - question - again

Post by k001k47 »

In all honesty though, I find pressure in the valve tubes very annoying, and like to pull slides; I feel you on this issue. My advice is to find a horn with vented valves and play it. If you like it - and it solves the issue - get your own valves vented!
User avatar
Ben
4 valves
4 valves
Posts: 718
Joined: Mon Jan 24, 2011 7:37 pm
Location: NYC

Re: venting valves - question - again

Post by Ben »

FWIW, Changing temperature (as it gets warmer/colder from playing/resting) of the instrument during performance can lead to differences in the pressure in the valve compartments. Although minor, while performing, I always hit the valves before an entrance in performance to avoid any minor pressure disturbances. See if this behavior helps your situation, if so, it is much cheaper then venting!

Good luck.
Ben Vokits
NYC/Philly area Freelancer
Nautilus Brass Quintet
Alex 164C, 163C, 155F; HB1P
luke_hollis
bugler
bugler
Posts: 171
Joined: Thu May 20, 2004 10:06 am

Re: venting valves - question - again

Post by luke_hollis »

Some notes speak better or differently than others. Some you might miss because the note in inherently out of tune on your instrument. Try buzzing the suspect note and hitting the pitch spot on perfect exactly when you want to, then try it on the horn. You may find you miss it because the note is flat/sharp on that instrument in that partial.

I have my valves vented and it allows you to pull/push for that funky note so when you play it, it is spot on (like a Db on a CC tuba). Otherwise you miss the note.
jeopardymaster
4 valves
4 valves
Posts: 982
Joined: Thu Dec 08, 2005 4:22 pm
Location: Ft Thomas, KY

Re: venting valves - question - again

Post by jeopardymaster »

For what it's worth, there are several folks close by your neck of the woods who I would trust to do this on one of my horns. (I live in Ft Thomas, just south of the Ohio River.) Dan Schultz (Evansville) has vented valves for me - I've never had a concern or problem ever. Without hesitation I'd let Norm Eppley (still in Frankfort?) do it. Gary Dafler at Hauer Music in Dayton. Those guys are just a few hours' drive away from you at most. Bloke is a little further away, I think, but I'd trust him too. I'm sure there are quite a few others.
Gnagey CC, VMI Neptune 4098 CC, Mirafone 184-5U CC and 56 Bb, Besson 983 EEb and euphonium, King marching baritone, Alexander 163 BBb, Conn 71H/112H bass trombone, Olds Recording tenor trombone.
Post Reply