I recently purchased a Dillon DBB-641 4/4+ BBb, and I am very pleased.
Here is the review I posted on their site:
"This is a very nice tuba for the money. I have played on a couple of Yamaha YBB-641 tubas that this model is based on, and the Dillon DBB-641 compares favorably with them.
Yes it plays just like the Yamaha, as far as I can tell. it's been a few years since I played the "real" one, but I like the way this tuba sounds.
The scale/intonation is as good as the Yamaha to my ear.
It's much better cosmetically that I was expecting. I have received several compliments. The photos on the Dillon site do not do this horn justice - it has very nice lacquer finish with nickel silver outer slides and a nice fancy engraved Dillon logo.
The nice wheeled hard case with real latches was a pleasant surprise. Most Asian-made tubas at this price point have fabric covered styrofoam hard/soft hybrid cases, but the wheels on those cases do tend to be larger than traditional hard cases and more able to go over rougher surfaces, like parking lots. The wheels on the Dillon case are smaller and hard and only suitable for interior floors and smooth outdoor surfaces. I plan on getting a gig bag and just using the hard case for home storage anyway.
The included mouthpiece is a copy of the stock Yamaha 67C4 mouthpiece, but not very well made. Plan on upgrading soon.
The fit and finish are better than some horns I have paid several times the price for, including mass-produced American tubas from a large Midwestern conglomerate. It is not German or Japanese quality, but you are paying 1/3 or 1/4 the price.
Compare this tuba not only to the Yamaha YBB-641, but also to similar larger 4/4 size tubas like the Meinl-Weston 25 or the Miraphone 187. You can play this tuba loud without breaking the sound due to the large bore and large bell throat.
As always Matt Walters, the Dillon tuba specialist, "under-promised and over-delivered". He is great to work with, and will truly make sure you are getting what you need and want.
Anyone who has any questions about this tuba can message me on the TubeNet site under my username "WakinAZ".
Regards,
Eric L., a happy community band tuba player and former music student in Tucson, AZ"
Dillon DBB-641 review
- WakinAZ
- Community Band Button-Masher
- Posts: 1084
- Joined: Sat Sep 02, 2006 4:03 pm
- Location: Back Row
-
- bugler
- Posts: 29
- Joined: Fri Feb 05, 2016 9:31 am
- Location: Madrid Spain
-
- 6 valves
- Posts: 4230
- Joined: Wed Jan 07, 2015 9:44 am
- Location: With my fellow Thought Criminals
Re: Dillon DBB-641 review
Their 1795 is a nice, lighter, smaller bore tuba as well.
I am committed to the advancement of civil rights, minus the Marxist intimidation and thuggery of BLM.
- WakinAZ
- Community Band Button-Masher
- Posts: 1084
- Joined: Sat Sep 02, 2006 4:03 pm
- Location: Back Row
Re: Dillon DBB-641 review
Long overdue pics: https://photos.app.goo.gl/tMyCOz7HHbddJdWj2
The smaller silver horn is a friend's Wessex/JinBao 210.
The smaller silver horn is a friend's Wessex/JinBao 210.
-
- 4 valves
- Posts: 565
- Joined: Tue Mar 03, 2015 8:11 am
Re: Dillon DBB-641 review
there was a GOOD KIND of YBB-641, the alexander-ian one, for sale on ebay just sold near $1000. needing a couple hundred to be playable, or just 6-800 to be very nice. Oh well.
- WakinAZ
- Community Band Button-Masher
- Posts: 1084
- Joined: Sat Sep 02, 2006 4:03 pm
- Location: Back Row
Re: Dillon DBB-641 review
Yes Mark, high G tends to be more in tune with third valve if I recall correctly. Small trade-off for a note not required very often in the rep that I play. I find the mid range in the staff needing lower range fingerings on most rotary BBb horns I play. I don't mind at all.
Yes Joe, It is well documented on TubeNet that most people do not like the YBB-641. I happen to like them just fine. People also tell me I sound good on them, including tuba players who own German-made horns. Go figure.
If the Chinese made a decent Miraphone 187 or 289 copy, I'd probably buy it. Or if they made a decent Meinl Weston 25 copy or Rudy 5/4 or Cerveny 601 copy I'd probably buy it. But they don't, so I bought this and I like it.
Eric "who likes what he likes" L.
I do agree the real YBB-641 is overpriced, considering the competition.
Yes Joe, It is well documented on TubeNet that most people do not like the YBB-641. I happen to like them just fine. People also tell me I sound good on them, including tuba players who own German-made horns. Go figure.
If the Chinese made a decent Miraphone 187 or 289 copy, I'd probably buy it. Or if they made a decent Meinl Weston 25 copy or Rudy 5/4 or Cerveny 601 copy I'd probably buy it. But they don't, so I bought this and I like it.
Eric "who likes what he likes" L.
I do agree the real YBB-641 is overpriced, considering the competition.
Last edited by WakinAZ on Wed Nov 08, 2017 10:18 pm, edited 1 time in total.
- WakinAZ
- Community Band Button-Masher
- Posts: 1084
- Joined: Sat Sep 02, 2006 4:03 pm
- Location: Back Row
Re: Dillon DBB-641 review
I neglected to add "at this price point" ~$2K.
I realize there is another level above this in quality and price range in the Eastman and John Packer lines, but still vastly cheaper than the European makers.
I'm satisfied with the DBB-641as my large 4/4 rotary BB-flat horn, but I'll check with you if I decide to try a different large 4/4 horn.
Now I'm just waiting on that Chinese 5/4+ rotary from Wessex or somebody..
I realize there is another level above this in quality and price range in the Eastman and John Packer lines, but still vastly cheaper than the European makers.
I'm satisfied with the DBB-641as my large 4/4 rotary BB-flat horn, but I'll check with you if I decide to try a different large 4/4 horn.
Now I'm just waiting on that Chinese 5/4+ rotary from Wessex or somebody..
-
- 6 valves
- Posts: 4230
- Joined: Wed Jan 07, 2015 9:44 am
- Location: With my fellow Thought Criminals
Re: Dillon DBB-641 review
So long as the valves work I'm happy!!WakinAZ wrote:I neglected to add "at this price point" ~$2K.
(Even if there are too many)
I am committed to the advancement of civil rights, minus the Marxist intimidation and thuggery of BLM.