Which model of Winter case fits a PT6-P ?
- swillafew
- 5 valves
- Posts: 1029
- Joined: Sun Nov 22, 2009 6:20 pm
- Location: Aurora, IL
Re: Which model of Winter case fits a PT6-P ?
If you build up a table of this kind of information, it will be an awesome resource here.
MORE AIR
-
- 3 valves
- Posts: 380
- Joined: Wed Jan 10, 2007 11:34 am
- Location: Los Angeles
Re: Which model of Winter case fits a PT6-P ?
The measurements are at the Jakob Winter website. They are not difficult to find:
http://www.jakobwinter.de/media/produkt ... 1301640172
-F
http://www.jakobwinter.de/media/produkt ... 1301640172
-F
- Robert Tucci
- TubeNet Sponsor
- Posts: 87
- Joined: Fri May 18, 2012 2:58 pm
- Location: Munich - Bavaria
Winter Cases
Blokie,
By far the best case for the "B & S" Perantucci PT-6/P is model 2089K/3098. I worked this out with the tech staff at Winter years ago. Photo attached: the block for the top bow and filler on the other end are very important. For this we also made a bell-plug. This case has additional padding on the lower end. Removed, the case will accept the new "B & S" MR-P CC-tuba as well.
We have this in stock.
Bob Tucci
By far the best case for the "B & S" Perantucci PT-6/P is model 2089K/3098. I worked this out with the tech staff at Winter years ago. Photo attached: the block for the top bow and filler on the other end are very important. For this we also made a bell-plug. This case has additional padding on the lower end. Removed, the case will accept the new "B & S" MR-P CC-tuba as well.
We have this in stock.
Bob Tucci
- Rivercity Tuba
- pro musician
- Posts: 243
- Joined: Fri Jul 20, 2007 5:21 am
- Location: In a van down by the river
Re: Winter Cases
Mr Tucci,
Bloke asked about the PT 6P and you posted information for the rotary model. Will this case work for the Piston valve tuba, if not which case will work?
Bloke asked about the PT 6P and you posted information for the rotary model. Will this case work for the Piston valve tuba, if not which case will work?
Robert Tucci wrote:Blokie,
By far the best case for the "B & S" Perantucci PT-6/P is model 2089K/3098. I worked this out with the tech staff at Winter years ago. Photo attached: the block for the top bow and filler on the other end are very important. For this we also made a bell-plug. This case has additional padding on the lower end. Removed, the case will accept the new "B & S" MR-P CC-tuba as well.
We have this in stock.
Bob Tucci