Hi Tubenet,
I'm looking for a beginner horn for one of my students. We're looking under the $2000 range! Whatcha got?
ISO: Bb tuba, for student
Forum rules
Reminder: "Go fund me" requests are not allowed and should be reported. All requests will be deleted. If you are Looking to trade an instrument, We are requiring all ads to have the following information. Approximate trade value, Brand, Model, and location (for instruments, not accessories)
Reminder: "Go fund me" requests are not allowed and should be reported. All requests will be deleted. If you are Looking to trade an instrument, We are requiring all ads to have the following information. Approximate trade value, Brand, Model, and location (for instruments, not accessories)
-
- bugler
- Posts: 32
- Joined: Fri Apr 08, 2011 11:38 pm
- Location: Chicago
- Contact:
ISO: Bb tuba, for student
Akshat Jain
Faculty - Merit School of Music
Founder - Illinois Low Brass Institute
ED - Chicago Freedom Ensemble
Treasurer - Tuba-Euphonium Social Justice Initative
MM DePaul University
BM Ball State University
Faculty - Merit School of Music
Founder - Illinois Low Brass Institute
ED - Chicago Freedom Ensemble
Treasurer - Tuba-Euphonium Social Justice Initative
MM DePaul University
BM Ball State University
- largobone
- bugler
- Posts: 145
- Joined: Tue Jul 12, 2016 10:47 am
- Location: Chicago
- Contact:
Re: ISO: Bb tuba, for student
Conn 11J
http://www.ebay.com/itm/RARE-CONN-11J-T ... Sw5l5ZnjaP" target="_blank" target="_blank" target="_blank" target="_blank
Conn 48J?-being sold by a forum member
http://www.ebay.com/itm/VINTAGE-1923-CG ... 0011.m1850" target="_blank" target="_blank" target="_blank" target="_blank
Conn 12J
http://www.ebay.com/itm/CONN-12J-3-4-SI ... 0009.m1982" target="_blank" target="_blank" target="_blank" target="_blank
Miraphone 186
If you want something a little more high-end; I don't know how much a beginner needs a 186 but even fixed up this would probably come out to less than $2k for playable condition, even nicer. http://www.ebay.com/itm/Repair-Man-Spec ... 0009.m1982" target="_blank" target="_blank" target="_blank" target="_blank
http://www.ebay.com/itm/RARE-CONN-11J-T ... Sw5l5ZnjaP" target="_blank" target="_blank" target="_blank" target="_blank
Conn 48J?-being sold by a forum member
http://www.ebay.com/itm/VINTAGE-1923-CG ... 0011.m1850" target="_blank" target="_blank" target="_blank" target="_blank
Conn 12J
http://www.ebay.com/itm/CONN-12J-3-4-SI ... 0009.m1982" target="_blank" target="_blank" target="_blank" target="_blank
Miraphone 186
If you want something a little more high-end; I don't know how much a beginner needs a 186 but even fixed up this would probably come out to less than $2k for playable condition, even nicer. http://www.ebay.com/itm/Repair-Man-Spec ... 0009.m1982" target="_blank" target="_blank" target="_blank" target="_blank
MM DePaul University
bass trombone, Evanston Symphony
trombone, Ohio Light Opera
bass trombone, Evanston Symphony
trombone, Ohio Light Opera
-
- bugler
- Posts: 109
- Joined: Fri Apr 01, 2016 11:23 pm
- Location: Central Illinois
Re: ISO: Bb tuba, for student
pm sent
- The Big Ben
- 6 valves
- Posts: 3169
- Joined: Sat Dec 16, 2006 11:54 am
- Location: Port Townsend, WA
Re: ISO: Bb tuba, for student
Give a little bit more information about your beginner.
Some tuba beginners have a few years experience on another brass instrument, usually a trumpet but not excluding the other brass instruments.
Others are starting from scratch with no experience reading music, counting notes and making sounds that are in tune. This kind of beginner needs a competent horn which actually can be played in tune (no leaks, worn valves) and fits the player's ergonomics. If possible, a small player should have a small horn. One of the Chinese 3v, upright valve BBb would be good as well as a King 1140 and whatever the equivalent horn is by Conn or Yamaha.
If interested, I have an older Miraphone Standard Perinet which is a BBb 3 upright valve instrument. It is in good shape and plays well. It is about the same size as the other 3 upright valve BBb beginners horns from the other namufacturers.Compared to the Chinese horns and even the King horn, this is an overbuilt instrument. It has extra ferrules at the ends of the slide tube and small guards and reinforcement in various places which out make it much more expensive new than the other horns. Miraphone has not built them for a number of years and I would guess the reason why is that they could not sell them for a price competitive with the other brands because it is too expansive to make. It was also built in a 4v model that is occasionally seen. You would get a appropriate mouthpiece but no case. I could supply it in the $500 range plus shipping. I am in the general Seattle, WA area. I hadn't considered selling it until I saw your request so don't have any photos at the present time. If you are interested, I can take some photos and send them to you. Send me a PM here.
Some tuba beginners have a few years experience on another brass instrument, usually a trumpet but not excluding the other brass instruments.
Others are starting from scratch with no experience reading music, counting notes and making sounds that are in tune. This kind of beginner needs a competent horn which actually can be played in tune (no leaks, worn valves) and fits the player's ergonomics. If possible, a small player should have a small horn. One of the Chinese 3v, upright valve BBb would be good as well as a King 1140 and whatever the equivalent horn is by Conn or Yamaha.
If interested, I have an older Miraphone Standard Perinet which is a BBb 3 upright valve instrument. It is in good shape and plays well. It is about the same size as the other 3 upright valve BBb beginners horns from the other namufacturers.Compared to the Chinese horns and even the King horn, this is an overbuilt instrument. It has extra ferrules at the ends of the slide tube and small guards and reinforcement in various places which out make it much more expensive new than the other horns. Miraphone has not built them for a number of years and I would guess the reason why is that they could not sell them for a price competitive with the other brands because it is too expansive to make. It was also built in a 4v model that is occasionally seen. You would get a appropriate mouthpiece but no case. I could supply it in the $500 range plus shipping. I am in the general Seattle, WA area. I hadn't considered selling it until I saw your request so don't have any photos at the present time. If you are interested, I can take some photos and send them to you. Send me a PM here.
- The Big Ben
- 6 valves
- Posts: 3169
- Joined: Sat Dec 16, 2006 11:54 am
- Location: Port Townsend, WA
Re: ISO: Bb tuba, for student
Sorry, this is a cockroach which would cost way too much to repair to be financially be a good idea.largobone wrote: Conn 12J
http://www.ebay.com/itm/CONN-12J-3-4-SI ... 0009.m1982" target="_blank
Another cockroach. They are asking $1200 for this beater. It cannot be repaired to reasonable usable condition for $800. Maybe $2K if the shop owner doesn't throw you out onto the sidewalk for bringing in such a cockroach and expecting the shop to work on it. That would be a total cost of $3200. Don'r underestimate the cost of a complete overhaul for an instrument which has been thrashed to within one inch of its life. A decent used 186 can be had for about $2000-3000 with maybe only a minor repair or two needed. One of the 4/4 Chinese clones can be bought as low as $1800 and they are new with a warrantee.Miraphone 186
If you want something a little more high-end; I don't know how much a beginner needs a 186 but even fixed up this would probably come out to less than $2k for playable condition, even nicer. http://www.ebay.com/itm/Repair-Man-Spec ... 0009.m1982" target="_blank
Last edited by The Big Ben on Thu Aug 31, 2017 11:54 am, edited 2 times in total.
- Dan Schultz
- TubaTinker
- Posts: 10424
- Joined: Thu Mar 18, 2004 10:46 pm
- Location: Newburgh, Indiana
- Contact:
Re: ISO: Bb tuba, for student
I have two reconditioned B & S 'Sonora' four rotor BBb tubas for sale. Dent free raw brass. No cases. Very good horns for about any level of playing. $1,800 each plus shipping.
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
- TUbajohn20J
- 4 valves
- Posts: 943
- Joined: Tue Nov 20, 2007 5:44 pm
- Location: Sugar Land, Texas
Re: ISO: Bb tuba, for student
The beginners dream horn. Conn 10J's are so easy to handle and are very in tune and are capable of a surprisingly bigger sound over the 12J due to the .695 bore.
$400 no major dents
http://m.ebay.com/itm/Conn-10j-Tuba-/18 ... Ciid%253A1" target="_blank
$400 no major dents
http://m.ebay.com/itm/Conn-10j-Tuba-/18 ... Ciid%253A1" target="_blank
Conn 26J/27J
Conn 22K Hybrid
Conn 22K Hybrid
- edsel585960
- 5 valves
- Posts: 1507
- Joined: Sun Oct 09, 2011 4:28 pm
- Location: SW Florida
Re: ISO: Bb tuba, for student
viewtopic.php?f=4&t=83219" target="_blank YBB 103. Big sound for the size. On the more expensive side but a great horn. MW 20 viewtopic.php?f=4&t=83537" target="_blank St. Pete 202. Good horn for the price. viewtopic.php?f=4&t=83431" target="_blank
Conn 20-21 J
Conn 10J, Conn 26 K, Martin Mammoth, Mirafone 186, Soviet Helicon, Holton Raincatcher Sousaphone, Yamaha 103, King 1240.
Conn 10J, Conn 26 K, Martin Mammoth, Mirafone 186, Soviet Helicon, Holton Raincatcher Sousaphone, Yamaha 103, King 1240.
- edsel585960
- 5 valves
- Posts: 1507
- Joined: Sun Oct 09, 2011 4:28 pm
- Location: SW Florida
Re: ISO: Bb tuba, for student
"The beginners dream horn. Conn 10J's are so easy to handle and are very in tune and are capable of a surprisingly bigger sound over the 12J due to the .695 bore.
$400 no major dents"
http://m.ebay.com/itm/Conn-10j-Tuba-/18 ... Ciid%253A1" target="_blank" Ditto! 10J's are great student horns. :tuba:http://www.ebay.com/itm/CONN-BBb-TUBA-L ... 2763.l2649" target="_blank" This 10J has a case with it.
$400 no major dents"
http://m.ebay.com/itm/Conn-10j-Tuba-/18 ... Ciid%253A1" target="_blank" Ditto! 10J's are great student horns. :tuba:http://www.ebay.com/itm/CONN-BBb-TUBA-L ... 2763.l2649" target="_blank" This 10J has a case with it.
Conn 20-21 J
Conn 10J, Conn 26 K, Martin Mammoth, Mirafone 186, Soviet Helicon, Holton Raincatcher Sousaphone, Yamaha 103, King 1240.
Conn 10J, Conn 26 K, Martin Mammoth, Mirafone 186, Soviet Helicon, Holton Raincatcher Sousaphone, Yamaha 103, King 1240.
- TUbajohn20J
- 4 valves
- Posts: 943
- Joined: Tue Nov 20, 2007 5:44 pm
- Location: Sugar Land, Texas
Re: ISO: Bb tuba, for student
Here's a good looking Conn 5J 4 valve that appears to be all there even though the seller lists it as "parts only". A good going over by a repair tech would have this thing playing perfect.
http://m.ebay.com/itm/Conn-5J-Series-4- ... iid%253A11" target="_blank
http://m.ebay.com/itm/Conn-5J-Series-4- ... iid%253A11" target="_blank
Conn 26J/27J
Conn 22K Hybrid
Conn 22K Hybrid