Creation of a 6/4 Compensated BBb!

TubeNet Sponsors make TubeNet possible!
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Creation of a 6/4 Compensated BBb!

Post by Wyvern »

This is just too exciting to hide in my other thread - it deserves thread of its own!

Here is proof of concept for Wessex new Compensated BBb ‘Leviathan’ which we believe will be the first 6/4 British style compensated BBb bass ever manufactured. This development prototype was put together quickly with some hand bent tubing, so the production model will be much more refined. The 4th valve is rotary to make the tuba free blowing in the low register, while allowing greater comfort playing as the left hand only has to reach between 1st slide tubing to operate the valve. The result is this huge tuba is comfortable and easy to hold and play. The broad tone from the Leviathan will put a foundation under any band like no currently available compensated bass. Although some current models may be physically large, they are slim in the bows (really only 4/4) against this new tuba - and that huge bell throat gives the encompassing rich tone. We plan to be able to exhibit the production prototype early 2018.

Image

I would like to thank Chuck Nickles and the incredible development team at our factory in China for putting this fantastic new tuba together and making one of my personal dreams come true. One week ago this was just a design in Chuck’s head and now it is a real tuba that plays and sounds fantastic! I can’t wait to hear the encompassing bass tone a couple of these will put under a Championship brass band :D
User avatar
Steve Marcus
pro musician
pro musician
Posts: 1842
Joined: Fri Mar 19, 2004 12:18 am
Location: Chicago area
Contact:

Re: Creation of a 6/4 Compensated BBb!

Post by Steve Marcus »

Jonathan,

Does this use the same bugle as the "Grand" 6/4 BBb?
Steve Marcus
http://www.facebook.com/steve.marcus.88
Phi Mu Alpha Sinfonia
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Creation of a 6/4 Compensated BBb!

Post by Wyvern »

Steve Marcus wrote:Does this use the same bugle as the "Grand" 6/4 BBb?
Steve, Yes, indeed it does!
tofu
5 valves
5 valves
Posts: 1995
Joined: Sun Mar 21, 2004 11:59 pm
Location: One toke over the line...

Re: Creation of a 6/4 Compensated BBb!

Post by tofu »

Could you post a photo of the rotor / backside of the horn?
User avatar
Lectron
4 valves
4 valves
Posts: 771
Joined: Sun Sep 04, 2011 5:25 am
Location: Norway

Re: Creation of a 6/4 Compensated BBb!

Post by Lectron »

Mark Finley wrote:That is amazing. Love the use of the rotor for the 4th valve.
That would be a Michael Johnson design.
http://mike-johnson-custom.co.uk/customising/index.html" target="_blank
Not sure he is too happy about not being mentioned.
But there again. Why re-invent something when there are so many nice designs to pick from
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Creation of a 6/4 Compensated BBb!

Post by Wyvern »

Let me just clarify the situation - Mike Johnson ‘seeded the idea’ of using a rotary valve to reduce the reach to the 4th valve (which is a great idea for which I thank Mike), but ALL the design work for this tuba (including the tube routing) was done by Chuck Nickles who has worked really hard and with incredible ingenuity to create this new horn.
Mike-Johnson-Custom
bugler
bugler
Posts: 88
Joined: Wed Nov 05, 2014 1:30 pm
Location: United Kingdom
Contact:

Re: Creation of a 6/4 Compensated BBb!

Post by Mike-Johnson-Custom »

Jonathan.
I did not seed the idea to you!
Neither my concept of a 6/4 compensating BBb nor my use of a 4th rotor to open the 4th valve register or for erganomic reasons.
The rotary 4th on a compensator is my registered design!
You can't just use it because we had a discussion 5 years ago!
You even allude to what I have on my web site and face book currently which are recent developments of the concept that weren't around 5 years ago.
I made it quite clear when we spoke that any of my ideas you used would be by contract and appropriate renumeration.
You have now on more than one claimed this and not even given credit that it was my concept in the first place.
Mike Johnson Custom
http://m-j-c.co.uk
phone:
+44 161 298 5838
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Creation of a 6/4 Compensated BBb!

Post by Wyvern »

Mike-Johnson-Custom wrote: The rotary 4th on a compensator is my registered design!
Mike, What do you mean by this? Is the design patented and if so what is the patent number? If that is the case, then we will of course honour that patent and recompense for the use of the design. If not patented, then nothing is legally due - but I am still happy to discuss with you off-line when I am back in UK, as I do not want you feeling aggrieved
Last edited by Wyvern on Sun Sep 24, 2017 8:54 am, edited 1 time in total.
UDELBR
Deletedaccounts
Deletedaccounts
Posts: 1567
Joined: Fri Mar 19, 2004 1:07 am

Re: Creation of a 6/4 Compensated BBb!

Post by UDELBR »

Mark Finley wrote:I'm not sure the concept of replacing a piston valve with a rotor is one than anyone can corner the market on, legally.
I'd also be very surprised if that were the case.
User avatar
Lectron
4 valves
4 valves
Posts: 771
Joined: Sun Sep 04, 2011 5:25 am
Location: Norway

Re: Creation of a 6/4 Compensated BBb!

Post by Lectron »

UncleBeer wrote:
Mark Finley wrote:I'm not sure the concept of replacing a piston valve with a rotor is one than anyone can corner the market on, legally.
I'd also be very surprised if that were the case.
By all means, I wouldn't think so at all.
As columbus wouldn't be able to patent how to balance an egg.

It's a matter of who had the idea of doing so on the compesators, and have been doing so for quite some time.
It's a matter of taking pride of other persons work.
TheGoyWonder
4 valves
4 valves
Posts: 565
Joined: Tue Mar 03, 2015 8:11 am

Re: Creation of a 6/4 Compensated BBb!

Post by TheGoyWonder »

welp all double french horns have it. and there are dozens of brands of double french horns so I think not a patent issue.
User avatar
bububassboner
pro musician
pro musician
Posts: 648
Joined: Wed Jan 03, 2007 1:16 am
Location: Sembach, Germany

Re: Creation of a 6/4 Compensated BBb!

Post by bububassboner »

Okay, I just want to share from my side of this how this tuba came to be to clear up how things were done.

Jonathan approached me in the summer about turning my "Grand" BBb tuba into a 3+1 compensating tuba. I'm not a fan of compensating tubas but I thought sure why not. He threw out the idea then about using a rotor for the fourth valve. I just smiled and nodded. I thought that would look goofy and I wasn't sure how people would take to that on a production horn. I'd planned in my mind to make it work with the already existing valve block from his line up.

When I was in the factory in the summer I loaded up a regular 3+1 valve set, a grand body, leadpipe, and a bunch of tubing into a box. That box was going to go to the US then be shipped to me so I could build the horn in my shop. Jonathan wanted it done for the September trip so I was gonna have around three months to build the horn. Three months to slap a 3+1 set onto a 6/4 body? Too easy I thought.

Well long story short the box didn't make it Into the container. Jonathan said "well you can just build it at the factory". To be honest I was a bit nervous about that. One week isn't a lot of time to build any tuba, let alone a new model. I do like to eat though so I decided I was gonna make it happen.

So when I got to china I just grabbed a grand body and an excelsior that had to be redone for finish issues and I got to work. I tore off the piston set and mocked it up on the grand body. It was pretty obvious from the get go that the reach to the fourth piston was gonna be an issue. Putting the piston block where it was balanced put the fourth completely out of reach for me. Someone much bigger than me could have used it, but I didn't want to build a tuba where to had to be over 6 foot to play it (I round up to 5 foot 9). I tried moving the fourth piston around but either the porting for the valve was bad or it wasn't in a good place to use. So I decided screw it, I'll use a rotor for the fourth. That's what Jonathan had wanted and I couldn't make it work with a piston. I've added a couple fourth rotor valves to non compensating horns before so this shouldn't be much different.

The next week was full of lots of trial and error. I made 4 different main tuning slide crooks, had the rotor in 3 different spots, and did 4 different fourth valve wraps. This body never really had in mind the use of a 3+1 set so making all the piping work without a ton of small bends was a challenge. I originally had the fourth valve tubing not go down nearly as low and I had the slide between the bell and the first valve. I wanted the slide to be an easy reach while playing but I just didn't have room for this. I had also thought about a fourth valve slide going up by the third valve but I didn't want to have to change the direction of the piston knuckles.

I finally got it put together and showed Jonathan. He then asked me to move the entire valve block lower on the horn. So the next day was making it all work for that. After a lot of soldering and swearing I got it to what he has shown.

This project had very little guidance from Jonathan other than 6/4 BBb with compensating valves, maybe use a rotor for the fourth. He didn't mention Mike at all when he pitched it to me and I wasn't even aware about his conversions until this week. With my limited internet here in china (and google being blocked here) I can't even find a picture of any of his BBb conversions. I saw a picture of his Eb conversion yesterday for the first time. It does look similar, but after building it there really weren't many other ways to build it. There are four fixed ports to have to line up with. Kinda limits your options, especially on a big body like this.

I hope this sheds some light on how this tuba came to be. Now it's off to bed so I can finish a few more new models before the trip is over.
Big tubas
Little tubas
Army Strong
Go Ducks!
User avatar
Lectron
4 valves
4 valves
Posts: 771
Joined: Sun Sep 04, 2011 5:25 am
Location: Norway

Re: Creation of a 6/4 Compensated BBb!

Post by Lectron »

Anyways.

Disregard who did what and when.

I hope this turns out to be a terrific tuba with an easy and workable intonation.
It will be good to get som core and fundamental back in the bands.

And remember....."We" don't do slide-pulling in banding ;)
And as for trigger......30 cent is ~4.5 cm, so not really that practical "on the run"

Good luck with the product. Looking forward to try it
User avatar
bort
6 valves
6 valves
Posts: 11222
Joined: Wed Sep 22, 2004 11:08 pm
Location: Minneapolis, Minnesota

Re: Creation of a 6/4 Compensated BBb!

Post by bort »

Contrabass? More like Contra-versy!

Put a Z-valve in the compensating 4th valve, and you'll double the who-made-what-first fun! :P
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Creation of a 6/4 Compensated BBb!

Post by Wyvern »

bort wrote:Put a Z-valve in the compensating 4th valve, and you'll double the who-made-what-first fun! :P
It is a Z-valve and not standard rotary valve we are using :wink:
Patrase
bugler
bugler
Posts: 149
Joined: Fri Jun 27, 2014 5:02 pm

Re: Creation of a 6/4 Compensated BBb!

Post by Patrase »

At one time B&S offered a 3 piston one rotor Eb tuba - the model 291. One nifty feature was the adjustable height leadpipe

See images here:

http://www.flohmarkt.ms/hoerner/b+s+pro ... ew=gallery" target="_blank
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: Creation of a 6/4 Compensated BBb!

Post by Wyvern »

Bloke, That change is already planned in production tuba. Thank you for your feedback
User avatar
iiipopes
Utility Infielder
Utility Infielder
Posts: 8556
Joined: Tue Sep 06, 2005 1:10 am

Re: Creation of a 6/4 Compensated BBb!

Post by iiipopes »

Time to lock this thread.
User avatar
iiipopes
Utility Infielder
Utility Infielder
Posts: 8556
Joined: Tue Sep 06, 2005 1:10 am

Re: Creation of a 6/4 Compensated BBb!

Post by iiipopes »

KiltieTuba wrote:
iiipopes wrote:Time to lock this thread.
Why?
If we can't discuss simple designs and TUBAS, why bother having TubeNet?
It would not be because of the discussion. It would be because of what appears to be a serious disagreement between two persons that probably is not a proper point of discussion here on TubeNet.
kingconn
bugler
bugler
Posts: 107
Joined: Sun Dec 19, 2004 10:20 am
Location: winston salem n.c.

Re: Creation of a 6/4 Compensated BBb!

Post by kingconn »

As long as you are making the 4th valve a rotor, I would love if someone made to operate with the right or left hand. I like the Besson 983 but often when playing low passages I reach across with my left hand to operate the 4th valve.
Post Reply