Treasure Coast (FL) CL: Marzan CC
Forum rules
This is for posting links to off site deals that you are not personally selling,but wanting to pass along good deals
This is for posting links to off site deals that you are not personally selling,but wanting to pass along good deals
- Dan Schultz
- TubaTinker
- Posts: 10424
- Joined: Thu Mar 18, 2004 10:46 pm
- Location: Newburgh, Indiana
- Contact:
Re: Treasure Coast (FL) CL: Marzan CC
This is the Willson-made Marzan 'solo' model. A good bit smaller than the more popular tubas built by Bohm & Meinl.
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
- bort
- 6 valves
- Posts: 11223
- Joined: Wed Sep 22, 2004 11:08 pm
- Location: Minneapolis, Minnesota
Re: Treasure Coast (FL) CL: Marzan CC
I have tried a few of these before -- they are not very large, but still a decent size and play pretty well. Probably similar to a Conn 3J, in that "small 4/4" size category.
- Steve Inman
- 4 valves
- Posts: 804
- Joined: Fri Mar 19, 2004 11:48 am
Re: Treasure Coast (FL) CL: Marzan CC
Does anyone know an approximate bore size for the Solo model?
Steve Inman
Yamaha YEB-381 Eb
Conn 56J CC
Willson-Marzan CC Solo Model
Kokomo Chamber Brass
Yamaha YEB-381 Eb
Conn 56J CC
Willson-Marzan CC Solo Model
Kokomo Chamber Brass
- Dan Schultz
- TubaTinker
- Posts: 10424
- Joined: Thu Mar 18, 2004 10:46 pm
- Location: Newburgh, Indiana
- Contact:
Re: Treasure Coast (FL) CL: Marzan CC
Marzan 'solo' specs:Steve Inman wrote:Does anyone know an approximate bore size for the Solo model?
- made by Willson
- Marzan engraved on bell
- four pistons
- made in both CC and BBb
- No serial numbers on the examples I've seen
- 17" bell
- .638" bore
- .919" piston diameter
- 'Swiss Made' stamped on receiver
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
- Steve Inman
- 4 valves
- Posts: 804
- Joined: Fri Mar 19, 2004 11:48 am
Re: Treasure Coast (FL) CL: Marzan CC
Thanks, Dan.
Steve Inman
Yamaha YEB-381 Eb
Conn 56J CC
Willson-Marzan CC Solo Model
Kokomo Chamber Brass
Yamaha YEB-381 Eb
Conn 56J CC
Willson-Marzan CC Solo Model
Kokomo Chamber Brass
- Steve Inman
- 4 valves
- Posts: 804
- Joined: Fri Mar 19, 2004 11:48 am
Re: Treasure Coast (FL) CL: Marzan CC
FYI, I contacted the seller, and this tuba has been sold. Accordingly, the seller has deleted his Craigslist FS post, which Hal kindly shared as the original post above.
Regards,
Regards,
Steve Inman
Yamaha YEB-381 Eb
Conn 56J CC
Willson-Marzan CC Solo Model
Kokomo Chamber Brass
Yamaha YEB-381 Eb
Conn 56J CC
Willson-Marzan CC Solo Model
Kokomo Chamber Brass