Rotary Tenor tuba/euphonium
- TheAltoHornGuy
- bugler
- Posts: 25
- Joined: Tue Mar 21, 2017 7:56 pm
Rotary Tenor tuba/euphonium
I am interested in picking up a rotary tenor tuba or euphonium. I recently picked up this neat Lignatone Eb Alto (Oval rotary type) and got really interested. Any good brands to recommend? My budget is quite limited.
I hear Miraphone and Alexander are leading this tenor tuba/euphonium sector.
I hear Miraphone and Alexander are leading this tenor tuba/euphonium sector.
-
- 3 valves
- Posts: 350
- Joined: Tue Feb 28, 2006 9:40 am
- Location: Netherlands
Re: Rotary Tenor tuba/euphonium
The Miraphone 56 A (4 valves, with possibility for a 5th valve) is excellent quality. I play it myself and enjoy it very much. It is lighter/brighter tone than a euphonium, but very warm and lively. Very attractive sound and rather easy to play.
Cerveny 533 and 733 are comparable (also 4 or 5 valves), but not as outstanding quality as the Miraphone. Both Miraphone and Cerveny have "graduating" bore sizes.
The Alex 151 really is the Rolls Royce among tenor tubas. Its "mensura" is wider than the other two. If I could afford it, I would prefer it over an euphonium, because of the the magnificent sound and ease of playing.
Just my 2 cents.
Hubert
Cerveny 533 and 733 are comparable (also 4 or 5 valves), but not as outstanding quality as the Miraphone. Both Miraphone and Cerveny have "graduating" bore sizes.
The Alex 151 really is the Rolls Royce among tenor tubas. Its "mensura" is wider than the other two. If I could afford it, I would prefer it over an euphonium, because of the the magnificent sound and ease of playing.
Just my 2 cents.
Hubert
-
- 3 valves
- Posts: 350
- Joined: Tue Feb 28, 2006 9:40 am
- Location: Netherlands
Re: Rotary Tenor tuba/euphonium
https://www.youtube.com/watch?v=jhOPsbTq5qE
Here a "Tenorhorn", i.e. the smaller (narrower) brother/sister of the Miraphone Kaiser, the Cerveny 533/733 and the Alexander 155.
Hubert
Here a "Tenorhorn", i.e. the smaller (narrower) brother/sister of the Miraphone Kaiser, the Cerveny 533/733 and the Alexander 155.
Hubert
-
- 3 valves
- Posts: 274
- Joined: Tue Jun 22, 2004 12:59 pm
- Location: Brooklyn, NY
Re: Rotary Tenor tuba/euphonium
I have a Lignatone 3 valve tenorhorn. It's a cerveny stencil. Plays well.
You can hear it here, track 9 (6 tenorhorns overdubbed).
https://jacobgarchik.bandcamp.com/album/ye-olde" target="_blank
You can hear it here, track 9 (6 tenorhorns overdubbed).
https://jacobgarchik.bandcamp.com/album/ye-olde" target="_blank
- Donn
- 6 valves
- Posts: 5977
- Joined: Fri Aug 19, 2005 3:58 pm
- Location: Seattle, ☯
Re: Rotary Tenor tuba/euphonium
Are you sure that's really a tenor, or is he just playing a "Tenorhorn" part, on a euphonium? That's what it looks like to me. Same with C4 Tenorhorn, where he actually identifies it by model number as a euphonium. Appears to be as hard to keep this straight as it is with the equivalent euphonium vs. "baritone" issue here, even though the nomenclature seems much more sane than the English language situation.hubert wrote:https://www.youtube.com/watch?v=jhOPsbTq5qE
Here a "Tenorhorn", i.e. the smaller (narrower) brother/sister of the Miraphone Kaiser, the Cerveny 533/733 and the Alexander 155.
Anyway, I don't claim I can reliably see the difference myself, but I'd say this one is really a tenor: Ondřej Pavluš Koncertní arie (and a young player who makes it sing.)
-
- 3 valves
- Posts: 274
- Joined: Tue Jun 22, 2004 12:59 pm
- Location: Brooklyn, NY
Re: Rotary Tenor tuba/euphonium
it really is quite confusing. Plus different manufacturers made different sized horns at different times. As with tubas, the instruments have gotten bigger lately.
Here's a picture of a no-name European euphonium (I think!) on the left and my Lignatone tenor horn on the right. I believe both are smaller than any of the instruments in videos linked above.
Here's a picture of a no-name European euphonium (I think!) on the left and my Lignatone tenor horn on the right. I believe both are smaller than any of the instruments in videos linked above.
- Donn
- 6 valves
- Posts: 5977
- Joined: Fri Aug 19, 2005 3:58 pm
- Location: Seattle, ☯
Re: Rotary Tenor tuba/euphonium
Yes, well, there's no law of nature that forces these instruments into two, or three, distinct categories. Your euphonium looks on the small side to me - somewhat camouflaged by the compact wrap. Too bad it's nameless, looks nice.
Of course, if the O.P. really wants a "tenor tuba", this would be something of a tangent. That would be more like Mark Finley's Kaiser baritone. The Cerveny version has a .630 valve bore, where their tenors are .512 (which is still fairly large for what they are - yours might be smaller than that.)
Of course, if the O.P. really wants a "tenor tuba", this would be something of a tangent. That would be more like Mark Finley's Kaiser baritone. The Cerveny version has a .630 valve bore, where their tenors are .512 (which is still fairly large for what they are - yours might be smaller than that.)
- TheAltoHornGuy
- bugler
- Posts: 25
- Joined: Tue Mar 21, 2017 7:56 pm
Re: Rotary Tenor tuba/euphonium
Could you send me a PM?Mark Finley wrote:I have a 3 valve miraphone Kaiser that I would sell for a very good price
-
- 3 valves
- Posts: 350
- Joined: Tue Feb 28, 2006 9:40 am
- Location: Netherlands
Re: Rotary Tenor tuba/euphonium
Feel fair to say that the low register on my Miraphone 56A is OK.
Hubert
Hubert
- TheAltoHornGuy
- bugler
- Posts: 25
- Joined: Tue Mar 21, 2017 7:56 pm
Re: Rotary Tenor tuba/euphonium
Hi Hubert,hubert wrote:Feel fair to say that the low register on my Miraphone 56A is OK.
Hubert
Do you prefer an Alexander 151 or Miraphone?
-
- 3 valves
- Posts: 350
- Joined: Tue Feb 28, 2006 9:40 am
- Location: Netherlands
Re: Rotary Tenor tuba/euphonium
Definitely the Alexander. I have played it at the factory and since then it is the instrument of my dreams. Because tuba is my principal instrument and the Alexander is not really cheap, till now I have stayed with the Miraphone that is in my posession for many years already.
Best,
Hubert
Best,
Hubert