American shank mpc in Euro shank tuba solutions?
-
- bugler
- Posts: 215
- Joined: Thu Oct 19, 2006 4:22 pm
- Location: Lombard or Champaign/Urbana
American shank mpc in Euro shank tuba solutions?
Disclaimer: I've done my minimum due diligence searching both TubeNet's search function as well as Google, and I'm not finding a good answer, sooooooo...
I just picked up a used (and discontinued) mouthpiece for my Eb, and of course it's the wrong shank size so it bottoms out in the receiver. If I wrap a piece of paper around the shank it fits okay and it works REALLY well; arguably better than my current mouthpiece or anything else I've demo'd on this horn.
Obviously a piece of paper isn't an ideal solution going forward. What have the rest of you done in this kind of circumstance? Is there a particular type of tape that would work well without damaging the mouthpiece or coming loose inside my horn? I do see Wessex had an American->Euro shank adapter at one point but it looks to be discontinued as I can't find it on the website.
What says the TNFJ?
I just picked up a used (and discontinued) mouthpiece for my Eb, and of course it's the wrong shank size so it bottoms out in the receiver. If I wrap a piece of paper around the shank it fits okay and it works REALLY well; arguably better than my current mouthpiece or anything else I've demo'd on this horn.
Obviously a piece of paper isn't an ideal solution going forward. What have the rest of you done in this kind of circumstance? Is there a particular type of tape that would work well without damaging the mouthpiece or coming loose inside my horn? I do see Wessex had an American->Euro shank adapter at one point but it looks to be discontinued as I can't find it on the website.
What says the TNFJ?
-
- bugler
- Posts: 215
- Joined: Thu Oct 19, 2006 4:22 pm
- Location: Lombard or Champaign/Urbana
Re: American shank mpc in Euro shank tuba solutions?
That may be slightly too permanent for my taste.bloke wrote:- Replace the receiver.
~~~~~~~~ or ~~~~~~~~~
- Send the mouthpiece to New Jersey to have it "re-shanked".
- Ken Crawford
- 4 valves
- Posts: 722
- Joined: Sat Jun 23, 2012 10:45 am
- Location: Rexburg, ID
Re: American shank mpc in Euro shank tuba solutions?
Between the purchase of this mouthpiece and either alerting it or your horn, it sounds like you may have a mouthpiece budget of $2-300. Rather than making alterations, which may alter your playing results, take that budget and find another mouthpiece that works well and fits.
PS... Medical tape works better than paper, in the meantime.
PS... Medical tape works better than paper, in the meantime.
Last edited by Ken Crawford on Thu May 03, 2018 1:50 pm, edited 1 time in total.
-
- bugler
- Posts: 215
- Joined: Thu Oct 19, 2006 4:22 pm
- Location: Lombard or Champaign/Urbana
Re: American shank mpc in Euro shank tuba solutions?
I get what you guys are saying and I appreciate the input, but it's a vintage tuba (1918 Chicago Holton Eb) in great condition, and the mouthpiece (Dillon F1B) is likewise discontinued and in great condition.
Ken, I guess just to give a little more context, it's not a tuba I get the chance to play in an ensemble very frequently, and I've auditioned a half dozen different mouthpieces on it already. Was hoping for a "mostly fine" solution, so I will definitely try your tip with the medical tape!
Ken, I guess just to give a little more context, it's not a tuba I get the chance to play in an ensemble very frequently, and I've auditioned a half dozen different mouthpieces on it already. Was hoping for a "mostly fine" solution, so I will definitely try your tip with the medical tape!
- Worth
- 3 valves
- Posts: 451
- Joined: Sat Jan 19, 2013 7:44 am
Re: American shank mpc in Euro shank tuba solutions?
+1 for teflon i.e. Plumber's Tapepauvog1 wrote: In the mean time, maybe try plumbers tape on the shank for something slightly more permanent than paper.
2014 Wisemann 900 with Laskey 30H
~1980 Cerveny 4V CC Piggy
1935 Franz Schediwy BBb
1968 Conn 2J (thinking of selling)
~1980 Cerveny 4V CC Piggy
1935 Franz Schediwy BBb
1968 Conn 2J (thinking of selling)
-
- 6 valves
- Posts: 4230
- Joined: Wed Jan 07, 2015 9:44 am
- Location: With my fellow Thought Criminals
Re: American shank mpc in Euro shank tuba solutions?
Wessex sold an aluminum adapter (the only one I found anywhere) but it is no longer listed on their web site.
Not even as out of stock!!
Not even as out of stock!!
I am committed to the advancement of civil rights, minus the Marxist intimidation and thuggery of BLM.
-
- 3 valves
- Posts: 466
- Joined: Thu Sep 10, 2009 9:57 pm
Re: American shank mpc in Euro shank tuba solutions?
I use Teflon tape on one mouthpiece. I had the shank turned down to fit one of those intermediate leadpipes, and I'm using it on a large. Teflon lets you adjust it very precisely, lasts a long time, and costs less than a dollar a roll.
I also use the tape on household plumbing repairs way more frequently than I want, and I've recently learned a lot of people use it in lieu of anti-seize compound for a variety of applications, including some I would never have thought of, like shotgun choke tubes. I think some people assemble those modular mouthpieces that way. I don't own any so I haven't tried.
I also use the tape on household plumbing repairs way more frequently than I want, and I've recently learned a lot of people use it in lieu of anti-seize compound for a variety of applications, including some I would never have thought of, like shotgun choke tubes. I think some people assemble those modular mouthpieces that way. I don't own any so I haven't tried.
- cjk
- 5 valves
- Posts: 1915
- Joined: Fri Mar 19, 2004 12:16 pm
Re: American shank mpc in Euro shank tuba solutions?
So what kind of mouthpiece is it?
-
- bugler
- Posts: 215
- Joined: Thu Oct 19, 2006 4:22 pm
- Location: Lombard or Champaign/Urbana
Re: American shank mpc in Euro shank tuba solutions?
Thanks all for the tips! Tried out medical tape last night and it worked okay. I removed all the residue before putting the horn away. I'll give teflon tape a try soon, I imagine that might be a bit more hygienic. I've also gotten in touch with Wessex to see if they have any more adapters lying around.
As mentioned, the mouthpiece is a Dillon F1B. My Holton Eb is a beast of a frankenhorn so it's been interesting finding the right mouthpiece. Anything too big, the intonation and projection both suffer; too small, and the sound doesn't resonate. Started with the Imperial blokepiece, which worked okay. Was looking for a Laskey 28F to try something different but it's nearly impossible to find. A few months ago I caved and ordered a few variants of the same design my instructor was using in his big F: a PT 65, RT 64, and Canadian Brass MB 64. I ended up keeping the MB 64 and IMO it's an overlooked mouthpiece. Bigger sound than the standard 64 and more character than the 65. But this Dillon piece is giving me a similar sound with more clarity overall and improved intonation in the low range. Someone on Facebook was selling it and I picked it up on a whim, seems to be an awesome match for this horn though.
As mentioned, the mouthpiece is a Dillon F1B. My Holton Eb is a beast of a frankenhorn so it's been interesting finding the right mouthpiece. Anything too big, the intonation and projection both suffer; too small, and the sound doesn't resonate. Started with the Imperial blokepiece, which worked okay. Was looking for a Laskey 28F to try something different but it's nearly impossible to find. A few months ago I caved and ordered a few variants of the same design my instructor was using in his big F: a PT 65, RT 64, and Canadian Brass MB 64. I ended up keeping the MB 64 and IMO it's an overlooked mouthpiece. Bigger sound than the standard 64 and more character than the 65. But this Dillon piece is giving me a similar sound with more clarity overall and improved intonation in the low range. Someone on Facebook was selling it and I picked it up on a whim, seems to be an awesome match for this horn though.
- cjk
- 5 valves
- Posts: 1915
- Joined: Fri Mar 19, 2004 12:16 pm
Re: American shank mpc in Euro shank tuba solutions?
Dillon Music used to sell a brass American to Euro shank adapter. Maybe they still do
I don't remember if that mouthpiece was offered in euro shank.
The Dillon F1 and F2b mouthpieces which I previously owned had normal American shanks iirc. I don't know if they were offered in a larger shank size.
I find it strange that a Holton Eb has anything but an American or the smaller Eb size receiver.
I suggest you contact Matt Walters at Dillon music to see if they have any adapters and also find out if that mouthpiece was offered in a euro shank. If it was, you could post a "want to buy" thread.
You could always replace the receiver with one of those adjustable gap receivers.
I don't remember if that mouthpiece was offered in euro shank.
The Dillon F1 and F2b mouthpieces which I previously owned had normal American shanks iirc. I don't know if they were offered in a larger shank size.
I find it strange that a Holton Eb has anything but an American or the smaller Eb size receiver.
I suggest you contact Matt Walters at Dillon music to see if they have any adapters and also find out if that mouthpiece was offered in a euro shank. If it was, you could post a "want to buy" thread.
You could always replace the receiver with one of those adjustable gap receivers.
- MikeW
- 3 valves
- Posts: 443
- Joined: Sat Mar 24, 2012 2:44 pm
- Location: North Vancouver, BC
Re: American shank mpc in Euro shank tuba solutions?
Some years ago there was a discussion on here, can't find it right now...
The solution that someone came up with was to build up the shank with the same thin cork material used for re-corking woodwind instruments.
The solution that someone came up with was to build up the shank with the same thin cork material used for re-corking woodwind instruments.
Imperial Eb Kellyberg
dilettante & gigless wannabe
dilettante & gigless wannabe
-
- 3 valves
- Posts: 466
- Joined: Thu Sep 10, 2009 9:57 pm
Re: American shank mpc in Euro shank tuba solutions?
Draw the adapter you want, with dimensions as accurate as you can get. Measure your shank, compare that to what you would calculate.
(Is either or both a Morse taper? https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3779551/" target="_blank)
Then 3D print it at your local library. Most have a makerspace now. You'll have to wait in line with children printing Pokemons maybe. Maybe print a couple extra, ones a little larger you might want to sand down. It's just PLA plastic.
(Is either or both a Morse taper? https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3779551/" target="_blank)
Then 3D print it at your local library. Most have a makerspace now. You'll have to wait in line with children printing Pokemons maybe. Maybe print a couple extra, ones a little larger you might want to sand down. It's just PLA plastic.
-
- 3 valves
- Posts: 466
- Joined: Thu Sep 10, 2009 9:57 pm
Re: American shank mpc in Euro shank tuba solutions?
Found a table with standard tapers:
https://littlemachineshop.com/Reference/Tapers.php" target="_blank
https://littlemachineshop.com/Reference/Tapers.php" target="_blank
- tokuno
- 3 valves
- Posts: 270
- Joined: Thu Apr 26, 2007 12:51 am
Re: American shank mpc in Euro shank tuba solutions?
I use aluminum tape.
It holds up well; over a year for the last piece (just replaced it last month).
It holds up well; over a year for the last piece (just replaced it last month).
-
- bugler
- Posts: 80
- Joined: Fri Mar 19, 2004 5:41 am
- Location: Marquette, MI
Re: American shank mpc in Euro shank tuba solutions?
I have no experience with this company (I bought my Wessex adapter before they disappeared from the site), but armed with some measurements, you might talk to them and see if they have something that will work for you.
https://www.thomannmusic.com/adapter_fo ... piece.html
Tom
https://www.thomannmusic.com/adapter_fo ... piece.html
Tom
-
- bugler
- Posts: 215
- Joined: Thu Oct 19, 2006 4:22 pm
- Location: Lombard or Champaign/Urbana
Re: American shank mpc in Euro shank tuba solutions?
Dillon actually carries a couple from Josef Klier with similar measurements, but it looks like both of those adapters are actually for a "small-shank" tuba mouthpiece to either standard or Euro.Tom B. wrote:I have no experience with this company (I bought my Wessex adapter before they disappeared from the site), but armed with some measurements, you might talk to them and see if they have something that will work for you.
https://www.thomannmusic.com/adapter_fo ... piece.html
Tom
I reached out to Wessex and they still had the adapter in stock, so that's on it's way! Thanks for the suggestions so far, and I'll pop back in once I've gotten the chance to try it out.
-
- bugler
- Posts: 215
- Joined: Thu Oct 19, 2006 4:22 pm
- Location: Lombard or Champaign/Urbana
Re: American shank mpc in Euro shank tuba solutions?
Just wanted to post one more update on what happened here. As mentioned, I reached out to Wessex and they were able to sell me the adapter they no longer have on the website. Funny thing is, the adapter ALMOST bottoms out in my receiver. Maybe this was on purpose so it doesn't look weird sticking out too much, or maybe my receiver just has liberal sizing, who knows. In either case it would be nice to have another couple mm length, but it works.
And of course, after all this... I ended up preferring my MB-64 in this horn, Ie. the one that doesn't need an adapter. Either way, the adapter will be nice to have so I don't have to wonder if I ever want to try something else. Per bloke's warning about aluminum/brass reactions I will keep it separated from my mouthpieces while I'm not playing it.
And of course, after all this... I ended up preferring my MB-64 in this horn, Ie. the one that doesn't need an adapter. Either way, the adapter will be nice to have so I don't have to wonder if I ever want to try something else. Per bloke's warning about aluminum/brass reactions I will keep it separated from my mouthpieces while I'm not playing it.